Analysis of volatiles evolved during high-temperature treatment of thermally stable polymers. I. Nitrogen-containing acetylene-terminated resin

Cured samples of a nitrogen-containing acetylene-terminated resin, N,N′-(1,3-phenylene-dimethylidene)bis(3-ethynylaniline), have been heated at 10°C/min up to 900°C in a pyroprobe attached to a gas chromatograph/mass spectrometer (GC/MS). Analysis of the volatiles evolved during heating identified both gases and higher boiling compounds. The major higher boiling compounds are benzene, toluene, xylene, aniline, benzonitrile, m-methylaniline, and m-methylbenzonitrile; the gases include ammonia, methane, and traces of carbon dioxide. Correlations between sample temperature and the evolution of each of these compounds have been made. The onset of all volatile formation occurs between 450 and 500°C. The higher boiling volatiles peak, then end by approximately 700°C, while the gases peak then fall off but are still being evolved at 900°C. Average weight loss measurements of 13.6% at 700°C and 15.7% at 900°C agree with previously published thermogravimetric analysis (TGA) data. © 1993 John Wiley & Sons, Inc.     

Termites live in a material world: exploration of their ability to differentiate between food sources.

Drywood termites are able to assess wood size using vibratory signals, although the exact mechanism behind this assessment ability is not known. Important vibratory characteristics such as the modal frequencies of a wooden block depend on its geometry and boundary conditions; however, they are also dependent on the material characteristics of the block, such as mass, density and internal damping. We report here on choice experiments that tested the ability of the drywood termite Cryptotermes secundus to assess wooden block size using a solid wooden block paired with a composite block, the latter made of either wood and aluminium or wood and rubber. Each composite block was constructed to match mass or low-frequency vibratory modes (i.e. fundamental frequency) of the solid wooden block. The termites always chose the blocks with more wood; they moved to the solid wooden blocks usually within a day and then tunnelled further into the solid wooden block by the end of the experiment. Termites offered composite blocks of wood and rubber matched for mass were the slowest to show a preference for the solid wooden block and this preference was the least definitive of any treatment, which indicated that mass and/or damping may play a role in food assessment. This result clearly shows that the termites were not fooled by composite blocks matched for mass or frequency, which implies that they probably employ more than a single simple measure in their food assessment strategy. This implies a degree of sophistication in their ability to assess their environment hitherto unknown. The potential importance of alternative features in the vibrational signals is discussed.     

Directly Compressible Acetaminophen Compositions Prepared by Fluidized-Bed Granulation

Polyvinylpyrrolidone (PVP) in aqueous solution was used as a binding agent in a fluidized-bed system to agglomerate acetaminophen powder into directly compressible granules. It was found that a minimal amount of 5% w/w PVP in a concentration of 7.5% w/v or less was needed to produce granules with an acceptable flow and the corresponding tablets having enough hardness without capping. There was a strong correlation between the time for 80% dissolved (T₈₀) and the logarithm of granule volume-surface mean diameter. A directly compressible acetaminophen composition to manufacture tablets having a T₈₀ value less than 30 min can be prepared simply by adding an appropriate amount of disintegrant (crospovidone, sodium starch glycolate, or pregelatinized starch) to the agglomerated granules.     

A new efficient dcvs circuit synthesis technique used for an improved implementation of a serial/parallel multiplier

This paper describes an efficient technique for the design of fault-secure VLSI circuits based on differential cascode voltage switch (DCVS) logic. We propose a new synthesis method for constructing DCVS circuits with a near-optimal transistor count based on binary decision diagrams (BDDs). the time and memory resources required are very low, making the technique practical even for PC-based synthesis tools. This method is the basis for a CAD tool that allows automatic synthesis of fault-secure circuits based on the DCVS technology. We finally present an improved design and implementation of a 2's complement serial/parallel multiplier as an application of the proposed technique and algorithm.     

Evaluation of Qbd for electrons tunneling fromthe Si/SiO2 interface compared to electron tunneling from thepoly-Si/SiO2 interface

Electrical time-to-breakdown (TTB) measurements have shown the charge to breakdown Q_bd of gate oxide capacitors fabricated on n-type well (n-well) substrates always to be higher than that of capacitors on p-type well (p-well) substrates on the same wafer when both are biased into accumulation under normal test conditions. Here the authors correlate the higher n-well Q_bd to smooth capacitor oxide/substrate interfaces and minimized grain boundary cusps at the poly-Si gate/oxide interfaces, confirming that Fowler-Nordheim tunneling is the dominant current conduction mechanisms through the oxide. They correlate higher Q_bd to higher barrier height for a given substrate type and observe that the slope of the barrier height versus temperature plot is lower for both p-well and n-well cases with electrons tunneling from the silicon substrate. This is attributed to surface roughness at the poly-Si gate/SiO₂ interface. A poly-Si gate deposition and annealing process with clean, smooth oxide/substrate interfaces will improve the p-well breakdown characteristics and allow higher Q_bd to be achieved     

An overview of FDA medical device regulation as it relates to deep brain stimulation devices.

The United States Food and Drug Administration (FDA) is charged with assuring the safety and effectiveness of a variety of medical products and the FDA's Center for Devices and Radiological Health is responsible for premarket and postmarket regulation of medical devices. In this paper, we review--from device classification and clinical studies to the final marketing application--FDA's premarket requirements and postmarket requirements as they relate to deep brain stimulation devices.     

Experimental evaluation of fishway modifications on the passage behaviour of adult Chinook salmon and steelhead at Lower Granite Dam,Snake River,USA

Previous studies of Pacific salmonid passage over Snake River dams indicated slowed passage at transition pools, the transition area between the fishway entrance and the fish ladder. In 2001 and 2002, we conducted an experiment to determine if modified weirs affected adult salmon and steelhead passage times and route selection through the Lower Granite Dam transition pool. Fish attraction flows through the lower ladder weirs were experimentally increased using removable panels. During the experiment we monitored radio‐tagged adult Chinook salmon and steelhead to determine passage routes and times through the transition pool. The weir treatment increased the number of spring–summer Chinook salmon passing straight through the transition pool compared to those exiting the transition pool to the collection channel or tailrace. Mean passage times through the transition pool differed among routes and were significantly lower during treatment periods for the exit‐to‐collection channel route in spring‐summer Chinook salmon, but not for other routes. Passage times among routes differed in steelhead, but there was no evidence of treatment effects on route use or passage time. Fall Chinook exhibited similar trends in route use and passage time to spring–summer Chinook, but differences were not significant, perhaps because of relatively small sample size. Total dam passage times did not differ by treatment or route for any run. Fish depth during passage of the transition pool suggested that most fish passed through submerged orifices and supported the hypothesis that increased water velocity through these orifices caused the increase in straight‐through passage in spring–summer Chinook. Collectively, the results suggested the weir modifications provided improvement to passage through the transition pool for spring–summer Chinook and no evidence of negative effects on other runs. The results from this study were used to develop new design criteria and modifications of the Lower Granite Dam fishway. Copyright © 2006 John Wiley & Sons, Ltd.     

Psychosocial functioning in children of alcoholic fathers.

T. Jacob and K. Leonard (1986) reported that children of alcoholic fathers were comparable to children of depressed fathers in their psychosocial functioning. These results, however, were based on a relatively homogeneous sample. In the current study, previous results were extended by examining a sample of alcoholic fathers who were not screened for additional paternal psychiatric disorders or for major maternal psychopathology. Children in the unscreened and screened samples could not be distinguished in their functioning, and the majority of children of alcoholic fathers were functioning in the normal range of the Child Behavior Checklist. Given the heterogeneous adjustment in children of alcoholic fathers, the authors examined a range of factors that might protect against or exacerbate the risk associated with paternal alcoholism. Maternal depression and certain demographic characteristics were associated with poorer child functioning, particularly for male children. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

The gradient of the finite element variational indicator with respect to nodal and applications in fracture mechanics and mesh optimization

We derive a closed-form expression for the change in the variational indicator of a finite element mesh with respect to perturbations in nodal point co-ordinates. The expression is evaluated very effectively from standard finite element data obtained in one solution, and may be easily programmed as part of a general finite element code. We present the derivation for two- and three-dimensional isoparametric elements used in linear and nonlincar elasticity. The expression has practical applications in the computation of stress intensity factors in fracture mechanics and in the determination of the ‘optimal’ mesh with a given element-node connectivity. We demonstrate both applications by accurately determining the stress intensity factor of a Mode I crack using a finite element mesh which was improved using mesh optimization.