Photoelectric properties of planar structures with double Schottky barrier treated in a high-vacuum microwave discharge

The state of the surface of n-GaAs crystals upon high-vacuum microwave plasmachemical (HVMWPC) etching in various gas mixtures and the influence of the semiconductor surface condition on the photoelectric characteristics of related metal-semiconductor-metal structures with double Schottky barrier (MSMDSB structures) are investigated. Dependence of the HVMWPC etching rate of the GaAs surface on the gas mixture composition and substrate temperature is determined. It is shown that the HVMWPC etching regime strongly influences the photoelectric properties of MSMDSB structures: the treatment can lead to either growth or drop in photosensitivity of the samples. Optimum etching regimes are established for which good semiconductor surface quality and high photosensitivity of the MSMDSB structures are retained at a high etching rate.     

Optical amplification in a planar multichannel Mach-Zehnder interferometer based on metal-semiconductor-metal structures

This paper describes a new optoelectronic device—an optical transistor that provides power amplification of output visible radiation. The optical transistor is structurally based on a metallized semiconductor plate with a microchannel gap in the form of a planar Mach-Zehnder interferometer. A device of the light-light type is controlled by modulating the refractive index in one arm of the interferometer. Pis’ma Zh. Tekh. Fiz. 24, 17–21 (January 26, 1998)     

On Guaranteed Estimates of the Area of Convex Subsets of Compact Sets on the Plane

Automation and Remote Control - The paper considers the problem of constructing a convex subset of the largest area in a nonconvex compact set on the plane as well as the problem of constructing a...     

Energetics of Defect Fluorite and Pyrochlore Phases in Lanthanum and Gadolinium Hafnates

Aerodynamic levitation combined with laser heating was used to prepare melts in the HfO₂–La₂O₃ (–Gd₂O₃) systems. All melts crystallized upon quenching in oxygen. Hf₂La₂O₇ pyrochlore and Gd_0.5Hf_0.5O_1.75 fluorite phases were identified. Gd_0.5Hf_0.5O_1.75 fluorite was transformed into the pyrochlore structure by annealing at 1450°C. Pyrochlore that crystallized from HfO₂- La₂O₃ melts contained 31.6–34.2 mol% La₂O₃. The unit cell parameter increased linearly with La content from 10.736 to 10.789 Å. Drop solution calorimetric experiments were performed in 3Na₂O·4MoO₃ melt at 702°C. The enthalpies of formation from the oxides for pyrochlore phases are −107.0±5.0 kJ/mol for Hf₂La₂O₇ and −48.8±4.7 kJ/mol for Hf₂Gd₂O₇. The enthalpy of the pyrochlore–fluorite phase transition in Hf₂Gd₂O₇ is 23.6±3.1 kJ/mol.     

Development of monolithic catalysts with low noble metal content for diesel vehicle emission control

Topics in Catalysis - Monolith washcoated catalysts with potential for diesel emission control have been developed. Two types of catalysts have been prepared for further study: (1) MnO x supported...     

High-temperature catalysts with a synergetic effect of Pd and manganese oxides

A synergetic effect in the catalytic activity has been found after palladium introduction in Mn–Al–O systems. The magnitude of the synergetic effect depends on the types of the oxidic manganese species: oxide Mn₃O₄, spinel (Mn, Mg)[Mn, Al]₂O₄ or hexaaluminate (Mn, Mg)LaAl₁₁O₁₉. The synergetic effect of Pd and manganese-containing compounds is observed only if palladium is introduced to the low-temperature precursor of the manganese alumina spinel or manganese hexaaluminate. The synergetic effect is not observed when high-temperature samples with formed spinel or hexaaluminate phases are modified with Pd.     

Development of Monolithic Catalysts with Low Noble Metal Content for Diesel Vehicle Emission Control

Monolith washcoated catalysts with potential for diesel emission control have been developed. Two types of catalysts have been prepared for further study: (1) MnO _x supported on granulated -Al₂O₃, (2) MnO _x supported on cordierite monolith washcoated with -Al₂O₃. Both catalysts have been calcined at 500 and 900 °C and subsequently modified by doping with 0.1–1.0 wt% of Pt or Pd. The influence of the concentration of both manganese oxide (0–10 wt%) and noble metals Pt and Pd in the range 0–1.0 wt% on the catalytic activity in methane oxidation has been studied. Comparison of the catalytic activity of MnO _x /Al₂O₃ and MnO _x + Pt(Pd)/Al₂O₃ with that of a standard 1 wt%Pt/Al₂O₃ catalyst shows the existence of a synergetic effect. This effect is more pronounced for the samples calcined at 900 °C. The developed monolithic catalysts MnO _x + Pt(Pd)/Al₂O₃ demonstrate higher activity and thermal stability (up to 900 °C) compared to the commercial monolithic catalyst (TWC's).