Ultralow Expansion Glass as Material for Advanced Micromechanical Systems

Ultralow expansion (ULE) glasses are of special interest for temperature stabilized systems for example in precision metrology. Nowadays, ULE materials are mainly used in macroscopic and less in micromechanical systems. Reasons for this are a lack of technologies for parallel fabricating high-quality released microstructures with a high accuracy. As a result, there is a high demand in transferring these materials into miniaturized application examples, realistic system modeling, and the investigation of microscopic material properties. Herein, a technological base for fabricating released micromechanical structures and systems with a structure height above 100 μm in ULE 7972 glass is established. Herein, the main fabrication parameters that are important for the system design and contribute thus to the introduction of titanium silicate as material for glass-based micromechanical systems are discussed. To study the mechanical properties in combination with respective simulation models, microcantilevers are used as basic mechanical elements to evaluate technological parameters and other impact factors. The implemented models allow to predict the micromechanical system properties with a deviation of only ±5% and can thus effectively support the micromechanical system design in an early stage of development.     

Magnetically Controlled Carbonate Nanocomposite with Ciprofloxacin for Biofilm Eradication

Biofilms are the reason for a vast majority of chronic inflammation cases and most acute inflammation. The treatment of biofilms still is a complicated task due to the low efficiency of drug delivery and high resistivity of the involved bacteria to harmful factors. Here we describe a magnetically controlled nanocomposite with a stimuli-responsive release profile based on calcium carbonate and magnetite with an encapsulated antibiotic (ciprofloxacin) that can be used to solve this problem. The material magnetic properties allowed targeted delivery, accumulation, and penetration of the composite in the biofilm, as well as the rapid triggered release of the entrapped antibiotic. Under the influence of an RF magnetic field with a frequency of 210 kHz, the composite underwent a phase transition from vaterite into calcite and promoted the release of ciprofloxacin. The effectiveness of the composite was tested against formed biofilms of E. coli and S. aureus and showed a 71% reduction in E. coli biofilm biomass and an 85% reduction in S. aureus biofilms. The efficiency of the composite with entrapped ciprofloxacin was higher than for the free antibiotic in the same concentration, up to 72%. The developed composite is a promising material for the treatment of biofilm-associated inflammations.     

Microstructure and luminescence properties of the high pressure high temperature sintered AlN–TiN ceramics

Composite ceramics of titanium nitride grains incorporated in an aluminium nitride matrix have been synthesized by high pressure high temperature treatment of a mechanical mixture of AlN–TiN (3 mol % TiN) powders. The microstructure of the samples analysed by means of electron beam microanalysis and Raman spectroscopy shows that the formation of cubic AlN in the composite begins near titanium nitride grains. The areas of mixed chemical composition, which can be assigned to the formation of the solid solutions Al_1?xTi_xN, have been observed at the phase interfaces. The luminescence properties of AlN–TiN ceramics have been considered focusing on the choice of high pressure and high temperature treatment conditions. Three main components at 2.0 eV, 2.4 eV and 3.1 eV are revealed in the cathodoluminescence spectra analysed quantitatively. The observed emission originates from the radiative transitions with participation of valence band states, oxygen-vacancy centres (V_Al–O_N), nitrogen vacancies V_N, and shallow donors which form a complex system of energy levels in the bandgap of the wurtzite-type AlN.     

Cobalt-Catalyzed Green Cross-Dehydrogenative C(sp<Superscript>2</Superscript>)-H/P-H Coupling Reactions

Joined electrolysis of arenes (benzene or coumarin derivatives) and diethyl-H-phosphonate (EtO)₂P(O)H in the presence of [CoCl₂(bpy)] catalyst (5%) in an ethanol-aqueous solution in reductive conditions allows obtaining the desired products in a single step by aromatic C–H bonds phosphonation with yields up to 70%. The only by-product is hydrogen; the reaction proceeds at room temperature and does not require specially added reducing agents and oxidants or other initiators. Radical mechanism has been confirmed for the catalytic reaction proceeding via bicobalt phosphonates with Co–P bond, the structure of which also has been identified.     

Anti-inflammatory activity of Devil’s claw in vitro systems and their active constituents

Cell suspension and Agrobacterium rhizogenes-transformed hairy root cultures of Devil’s claw (Harpagophytum procumbens), an African plant with high medicinal value, were cultivated in shake-flasks. A purification scheme to isolate their main active constituents (the phenylethanoid glycosides verbascoside, leucosceptoside A, β-OH-verbascoside and martynoside; structurally identified by NMR and LC–MS) was then developed, and their concentrations in the cultures were determined by UV spectrometry following HPLC separation. Preparations, extracts and the isolated phenylethanoid glycosides from the H. procumbens in vitro systems were tested on isolated murine macrophages to study their effects on nitric oxide (NO) and cytokine (TNF-α, IL-6) release and the expression of COX-1 and COX-2. They were also added to human serum to investigate their effects on the classical pathway of complement activation. The results indicate that the extracts and preparations of the in vitro systems, and pure verbascoside (their main active constituent), had strong anti-inflammatory properties, comparable to or even higher than that of pure harpagoside (a major anti-inflammatory constituent of intact Devil’s claw tubers). Thus, they have potential as new anti-inflammatory agents.     

Bacterial Metabolites of Human Gut Microbiota Correlating with Depression

Depression is a global threat to mental health that affects around 264 million people worldwide. Despite the considerable evolution in our understanding of the pathophysiology of depression, no reliable biomarkers that have contributed to objective diagnoses and clinical therapy currently exist. The discovery of the microbiota-gut-brain axis induced scientists to study the role of gut microbiota (GM) in the pathogenesis of depression. Over the last decade, many of studies were conducted in this field. The productions of metabolites and compounds with neuroactive and immunomodulatory properties among mechanisms such as the mediating effects of the GM on the brain, have been identified. This comprehensive review was focused on low molecular weight compounds implicated in depression as potential products of the GM. The other possible mechanisms of GM involvement in depression were presented, as well as changes in the composition of the microbiota of patients with depression. In conclusion, the therapeutic potential of functional foods and psychobiotics in relieving depression were considered. The described biomarkers associated with GM could potentially enhance the diagnostic criteria for depressive disorders in clinical practice and represent a potential future diagnostic tool based on metagenomic technologies for assessing the development of depressive disorders.     

Ammonium tris-oxalatoferrate(III) as a source of metalloligand in direct synthesis of Cu/Fe coordination polymer

It has been shown that one-pot reaction of copper powder, ammonium tris-oxalatoferrate(III) (NH₄)₃[Fe(C₂O₄)₃]·3H₂O as a source of metalloligand, and ethylenediamine (en) leads to the formation of heterobimetallic complex (NH₄)[Cu(en)₂Fe(C₂O₄)₃]?2dmso (1). This complex has been characterised by elemental analysis, IR spectroscopy and single crystal X-ray crystallography. Crystal structure analysis reveals that 1 consists of [Cu(en)₂Fe(C₂O₄)₃]^? anionic chains with regularly alternated [Cu(en)₂]²⁺ and [Fe(C₂O₄)₃]^3? moieties. Magnetic susceptibility measurements indicate absence of a significant exchange interaction between the metal units. The polycrystalline X-band EPR spectrum of 1 exhibits broad line characteristic of Fe(III) centers, whereas the signals observed in EPR spectrum of frozen dmf solution of 1 are distinctly associated with zero field splitting in the spin states of rhombically distorted Fe(III) centers, non interacting with Cu(II) centers.     

Circadian Release of Male-Specific Components of the Greater Date Moth,Aphomia (Arenipses) Sabella,Using Sequential SPME/GC/MS Analysis

The greater date moth (GDM), Aphomia sabella Hampson (Lepidoptera: Pyralidae: Galleriinae), is a serious pest of date palms, Phoenix dactylifera. The release of volatiles from both males and females was investigated using sequential SPME/GC/MS analysis. Males release a complex mixture of compounds in a circadian rhythm during the night between 03:00 and 05:00 hr. Six compounds were identified: benzaldehyde, sulcatol (6-methyl-5-hepten-2-ol), geranyl acetone [(E)-6,10-dimethyl-5,9-undecadien-2-one], phenylacetaldehyde, 2-phenylpropenal, and (R)-fuscumol [(R)-(E)-6, 10-dimethyl-5, 9-undecadien-2-ol]. Benzaldehyde, sulcatol, and geranyl acetone were found only in trace amounts. These compounds were in glands located in the forewing of males only. Small amounts of acetoin and 2,3-butanediol were found sporadically in the SPME/GC/MS analyses of volatiles from females, and these compounds probably originate from microorganisms. This is the first finding of a circadian release of male-specific compounds in moths. GC/EAD analyses with synthetic standards of compounds released by males showed that the female antenna is stimulated by all six compounds, while the male antenna responded only to phenylacetaldehyde. A possible pheromonal role for the male-specific compounds is suggested by the circadian rhythm of their release and the EAD response of females to them. However, trapping tests with the main male-specific compounds in screen cages in the laboratory or in the field did not reveal any significant behavioral responses from females or males. Copulation in the laboratory was observed only in the presence of date palm tissue, thus suggesting that sexual communication and mating of GDM moths probably occurs in the crown of date palms.     

Characteristic Features of Boron Carbide Synthesis for Iron Triad Borides

We have studied the characteristic features of synthesis of iron, cobalt, and nickel borides by boron carbide reduction of oxides. We have shown that the reaction of boron carbide with iron triad metal oxides occurs through a stages involving formation of the metals, lower boride phases, carbides and borates of the corresponding metals. A characteristic feature of such a reaction is the higher reactivity of boron carbide compared with carbon in the initial stages, leading to the appearance of B₂O₃ and C which react at higher temperatures to form boron carbide. The method of boron carbide reduction of oxides allows us to obtain rather pure higher borides of iron, cobalt, and nickel.