Theoretical model for flash generation

Reduction of flash generated in a gas vent is of great concern for manufacturers of electronic parts. The present study proposes a theoretical model for flash generation through consideration of flow characteristics in a gas vent. The model predicts the factors controlling flash, i.e., material parameters such as zero‐shear viscosity, crystallization temperature, thermal conductivity, and heat capacity, and process parameters such as injection and mold wall temperatures, packing pressure, and the clearance of a gas vent. On the other hand, we measure the amount of flash generated in the molding of poly(phenylene sulfide) (PPS) composites containing glass fiber and spherical fillers (CaCO₃ or Al₂O₃). Flash reduces with decreasing size of spherical fillers. These experimental data are successfully interpreted using the flash model. Polym. Eng. Sci., 45:198–206, 2005. © 2005 Society of Plastics Engineers     

Thermal response in thermal energy storage material around heat transfer tubes: effect of additives on heat transfer rates

The effects of carbon-fiber chips and carbon brushes as additives on the thermal conductivity enhancement of phase change materials (PCMs) using in latent heat thermal energy storage are investigated experimentally and numerically by considering the wall effect of the additives. The carbon-fiber chips are effective for improving the heat transfer rate in PCMs. However, the thermal resistance near the heat transfer surface is higher than that for the carbon brushes. As a result, the overall heat transfer rate for the fiber chips is lower than that for the carbon brushes. Consequently, the carbon brushes are superior to the fiber chips for the thermal conductivity enhancement under the present experimental conditions. The carbon brushes are moreover applied to the packed beds of particles to overcome their low thermal conductivity in chemical heat pump/storage. The carbon brushes essentially improve the heat transfer characteristics in the packed beds, though the thermal resistance is observed because the particles obstruct contact between the fibers and the heat transfer surfaces.     

Effect of cation structure on the electrochemical and thermal properties of ion conductive polymers obtained from polymerizable ionic liquids

Several onium cations having vinyl group formed ionic liquids after coupling with bis(trifluoromethanesulfonyl)imide. These monomers were polymerized, and the relation between onium cation structure and properties of thus polymerized ionic liquids was investigated. The polymerized ionic liquid having ethylimiadzolium cation unit showed the highest ionic conductivity of around 10⁻⁴ S cm⁻¹ at 30 °C among the obtained polymers reflecting the lowest glass transition temperature of −59 °C. These polymers were thermally stable and their decomposition temperatures were about 350 °C. The ionic conductivity of the polymerized ionic liquids decreased by both the addition of lithium bis(trifluoromethanesulfonyl)imide and the polymerization in the presence of cross-linker. However, the polymerized ionic liquid having 1-methylpiperidinium cation structure showed good lithium ion transference number of 0.43 at room temperature.     

Polymerization of 2-dibutylamino-1,3,5-triazine-4,6-dithiol on wire during friction process

2-Dibutylamino-1,3,5-triazine-4,6-dithiol (DB) and a mixture of DB and triallylisocyanurate (TAIC) were used as a lubricant during steel wire drawing due to a dry process. DB gave a polymer film with 180 nm in thickness to wire surfaces during the wire drawing. The polymer film had a disulfide structure on the backbone and contained a small amount of DB monomer and olygomer. Molecular weight and polymer weight increased with the drawing rate. The mixture of DB and TAIC gave mainly a three-dimensional polymer film with 225 nm in thickness to wire surfaces during drawing. The polymer film insoluble in THF had mono and disulfide structures and contained a small amount of linear polymer, DB, and TAIC. Such tribological polymerizations are estimated as follows: DB produces dithiyl radicals on a nascent surface formed during drawing and in the presence of oxygen and heat. The dithiyl radicals were polymerized by coupling with each other to give disulfide bonds or added to allyl groups in TAIC to give monosulfide bonds. It is concluded that this technique should be possible to use for unifying metal processing and surface treatment. © 1995 John Wiley & Sons, Inc.     

Separation of Polyvinyl Chloride from Plastic Mixture by Froth Flotation after Surface Modification with Ozone

Selective modification by ozonation for the surface of polyvinyl chloride (PVC) was evaluated to separate PVC from the other plastics, polyethylene terephthalate (PET), polycarbonate (PC) and polymethyl methacrylate (PMMA), with almost the same density as PVC by the froth flotation process. Ozonation could selectively decrease the contact angles of flexible PVC from 87.5 degrees to 68.4 degrees and rigid PVC from 90.3 degrees to 66.9 degrees, whereas little decreases in the contact angle were observed for other plastics. This would be due to the replacement of the chloride group on the surface of PVC, into hydrophilic functional groups; carbonyl, carboxyl and ester group. The PVC was successfully separated from the other plastics by the froth flotation process after the selective surface modification by ozonation.     

Synthesis of Ba2NaNb5O15 Powders and Thin Films Using Metal Alkoxides

Transparent and highly oriented Ba₂NaNb₅O₁₅ (BNN) thin films have been prepared by using metal alkoxides. A homogeneous precursor solution was prepared by the controlled reaction of NaOC₂H₅, Nb(OC₂H₅)₅, and barium metal. The BNN precursor included a molecular-level mixture of NaNb(OC₂H₅)₆ and Ba[Nb(OC₂H₅)₆]₂ in ethanol. The alkoxy-derived powder crystallized to a low-temperature phase, and then transformed to orthorhombic BNN (tungsten bronze) at 600°C. BNN precursor films on substrates crystallized to orthorhombic BNN at 800°C via the low-temperature phase. Highly (002) oriented BNN films of tungsten bronze structure were successfully prepared on MgO (100) substrates at 700°C by using BNN underlayer.     

Selective conversion of propane to propene by the catalytic oxidative dehydrogenation over cobalt and magnesium molybdates

Catalytic performances of various metal molybdates were tested in the oxidative dehydrogenation of propane to propene with molecular oxygen under an atmospheric pressure. Most of the molybdates tested promoted the selective oxidative conversion of propane to propene and among them cobalt and magnesium molybdates were found highest in the activity and selectivity. It was also found that their catalytic activities were highly sensitive to the catalyst composition, and it turned out that Co_0.95MoO _x and Mg_0.95MoO _x catalysts which have slightly excess molybdenum showed the highest activity in the oxidative dehydrogenation of propane. Under the optimized reaction conditions, higher reaction temperatures and lower partial pressures of oxygen, these catalysts gave 60% selectivity to propene at 20% conversion of propane. Since the molybdates having the surface enriched with molybdenum oxide tended to show high activity for the propane oxidation, surface molybdenum oxide clusters supported on metal molybdate matrix seem to be the active sites for the selective oxidative dehydrogenation of propane.     

Synthesis and Magneto-mechanical Properties of Ce-TZP/La M-Type Hexaferrite Composite

An in situ composite composed of ceria-stabilized tetragonal zirconia polycrystals (Ce-TZP) and La{Co_0.5Fe_0.5(Fe_0.9Al_0.1)₁₁}O₁₉ was synthesized from a powder mixture of Ce-TZP, La(Fe_0.9Al_0.1)O₃, Fe₂O₃, Al₂O₃, and CoO. The dense Ce-TZP dispersed with platelike La{Co_0.5Fe_0.5(Fe_0.9Al_0.1)₁₁}O₁₉ crystals as a second phase were formed after sintering from 1250° to 1350°C. The saturation magnetization of the in situ composite Ce-TZP/La{Co_0.5Fe_0.5(Fe_0.9Al_0.1)₁₁}O₁₉ was proportional to the mass fraction of the hexaferrite second phase in Ce-TZP. The coercivity of the composite with a 20 mass% of second phase decreased from 9.14 to 2.52 kOe (from 728 to 201 kA/m) after the pulverization of the composite. The susceptibility (χ) increased by 15%–25% under uniaxial stress on the composite. The change of the susceptibility (Δχ/χ) value increased with decreasing the mass fraction of the second phase in the composite. The Δχ was found to increase linearly with applied stress and abruptly change on cracking, which is expected for the application in fracture sensing of the composite.     

Plasma developable photoresist containing electronic excitation energy quenching system

A dry developable negative working resist composition comprised of poly(methyl isopropenyl ketone) (PMIPK) and 4-methyl-2,6-di(4′-azido-benzylidene) cyclohexanone-1 was examined. The main photochemical product formed in the resist pattern was found to be a secondary amine which crosslinks PMIPK. Post-annealing forms a hydrogen-bonded product which shows a powerful electronic excitation energy quenching effect. The quencher is more powerful than the aromatic compound arising from the azide by post-annealing only. The residual resist thickness of the negative pattern is about 80 percent of the initial thickness of the coating in spite of all the azide compound remaining in the resist coating. The obtained dry developed resist pattern has a high dry etch resistance. Etchings of Si and SiO₂ were performed by plasma and reactive ion etching, respectively.     

Evaluation of the pseudocapacitance in RuO2 with a RuO2/GC thin film electrode

The pseudocapacitance of nanocrystalline RuO₂ with BET surface area of 42 m² g⁻¹ was evaluated using a RuO₂ modified Glassy Carbon (RuO₂/GC) thin film electrode. The charge storage behavior of the RuO₂/GC thin film electrode was studied from fast to slow scan cyclic voltammetry between various potential windows. The utilization of the thin film electrode method for nanocrystalline RuO₂ with known specific surface area allowed a semi-quantitative understanding of the electric double-layer capacitance (C_dl), adsorption related charge (C_ad), and the irreversible redox related charge (C_irr) per unit mass and surface area of RuO₂. Comparison of the cyclic voltammograms between different voltage windows revealed that the contribution from C_irr is especially dominant below 0.4 V (versus RHE) at slow scan rates.