Studies on modeling and control of spouted bed reactors—II: Control

Control and operability characteristics of an adiabatic spouted bed reactor with a first order reaction are investigated. The reactor transient response to changing operating conditions is analyzed and the generic control problems are formulated. Reduced-order state space models suitable for process control studies are constructed by utilizing the methods of orthogonal collocation and singular perturbation.Based on modern control and estimation techniques a hierarchy of different control systems is systematically generated. The assessment of alternative d     

Determination of Myricetin in Medicinal Plants by High-Performance Liquid Chromatography

The concentrations of myricetin in medicinal plants such as Rosa canina L. (rosa hip), Terebinthina chica L. (terebinth), Urtica dioica L. (nettle), and Portuca oleracea L. (purslane) were determined by high-performance liquid chromatography-mass spectrometry (HPLC-MS). The aglycones of myricetin were extracted using methanol–ascorbic acid– hydrochloric acid, methanol–hydrochloric acid, and methanol, separated within 5 min, and individually quantitated in the positive ionization mode using optimized conditions for HPLC-MS. Methanol–ascorbic acid–hydrochloric acid was the optimum extraction solvent. The myricetin concentration in the plants were between 3 and 58 mg kg^?1, with a limit of quantification equal to 0.1 mg L^?1.     

Adhesive surface interactions of cellulose nanocrystals from different sources

Adhesion plays an important role in the final properties of nanocomposites. This study explored the surface interaction of cellulose nanocrystals (CNCs) and the effect of CNC sources on adhesion between individual CNCs and the Si tip of an AFM cantilever using a force mapping technique called FMap. The adhesion between CNCs and a Si tip from five different sources has been studied: cotton, Whatman filter paper, hemp, softwood chemical kraft pulp, and softwood-dissolving pulp (alistaple). Mica was used as the background substrate to act as an internal standard. This study’s findings suggest that adhesion is not the same for all CNCs. Transmission electron microscopy and atomic force microscopy were used to determine the size and shape of each CNC. The experimental quantitative data showed that adhesion between CNCs and the Si tip has a close correlation with the diameter of the CNCs. X-ray photoelectron spectroscopy confirmed the presence of sulfate groups on the surface of the CNCs and a correlation between adhesion and surface chemistry of the CNCs was observed.     

PET/PEG共聚酯连续熔融终缩聚过程两相稳态模型分析

针对高性能共聚酯PET/PEG缩聚过程,建立了圆盘反应器中连续熔融聚合两相稳态模型,模拟分析了缩聚反应温度、压力、停留时间以及传质系数对气相组成、共聚酯数均分子量、端羧基浓度以及副产物二甘醇和水浓度的影响。结果表明：挥发组分主要在反应器的前半部分产生,在z > 0.4后气相挥发总量已经很小;乙二醇占气相组成的比例极高,约为90%,而二甘醇的含量极低,只为0.5%左右;随反应器温度、真空度、停留时间、传质系数的增加,共聚酯产物的分子量增大,当传质系数大于0.1 s^-1后,反应器出口的共聚酯分子量几乎不再变化,此时已不受传质控制,最终产物的分子量约26000。     

Tribological Behavior of TiAlN,AlTiN, and AlCrN Coatings at Boundary Lubricating Condition

In this study, ~?3.5 µm thick multilayer titanium alumina nitride (TiAlN), alumina titanium nitride (AlTiN), and alumina chromium nitride (AlCrN) coatings were deposited on the H13 steel surface by cathodic arc physical vapor deposition (CAPVD) method. The tribological performance of the coatings was evaluated by a tribometer at boundary lubrication condition. Then, coating surfaces were observed by optical microscope, optical profilometer, and atomic force microscope to evaluate the morphological changes, wear volumes, and tribofilm thickness. Also, scanning electron microscopy (energy dispersive X-ray) and X-ray photoelectron spectrometry analyses were applied to coating surfaces for the tribochemical evolution of the tribofilm. Results showed that AlCrN coating performed the best tribological behavior at boundary lubricated condition, when compared to TiAlN and AlTiN coatings and it can be used as a wear resistant cam tappet coating in internal combustion engines.     

Idiopathic swelling of the lower lip associated with topical anaesthesia. Report of three cases

Aim of the present study was to evaluate the effect of cefamandole, cefuroxime and cefoxitin on the level of gastrointestinal (GI) colonization by Candida albicans in humans. Twenty-eight adult patients received one of these three cephalosporins for 10 days, as treatment of infection, and were studied prospectively. Quantitative stool cultures for yeasts were performed immediately before, at the end, and 1 week after discontinuation of treatment. All three antibiotics caused an increase of the yeast concentration in the fecal flora. The increase caused by cefoxitin was the highest (2.5 log10 CFU/g of stool). Our results suggest that the cephalosporins tested cause minor increases of the colonization of the GI tract by C. albicans.