Immunity tests of implantable cardiac pacemaker against CW and pulsed ELF fields: experimental and numerical results

The aim of the present work is to investigate pacemaker (PMK) immunity against high-level extremely low frequency (typically 50 Hz) magnetic fields that can be found in industrial environment where high power machines operate. To that purpose, a test bench has been set up using a Helmholtz coil for producing extremely low frequency magnetic fields and a trunk simulator rightly fed by cardiac signals. A widely used PMK was tested, and results have been reported, under different operating conditions, for both continuous waves and variously pulsed excitations. A numerical tool has also been developed to analyze the realized test bench, based on a proper discretization of a human trunk simulation and on the construction of an equivalent three-dimensional (3-D) network. Numerical results have showed a good agreement with the experimental results.     

Millimeter wave inductive post filters,theory and results

This paper briefly details the work carried out on the modelling of inductive post filters. This type of filter approach is particularly attractive at millimeter wave frequencies due to its ease of manufacture, however for modelling no true wide band equivalent circuit would seem to be available. In order to overcome this limitation we have developed a rigorous wide band model. The accuracy of the model has been confirmed by numerous experimental measurements and the resulting computer program quickly enables both analysis and synthesis to be carried out. The speed and efficiency of this approach has allowed the effect of mechanical tolerances to be taken into account, thus reducing cost, complexity and assembly times.     

Microstructure and Local Strain Fields in a High‐Alloyed Austenitic Cast Steel and a Steel‐Matrix Composite Material after in situ Tensile and Cyclic Deformation

The tensile and cyclic deformation behaviour of a new metastable austenitic stainless cast TRIP (TRansformation Induced Plasticity) steel and a composite material consisting of austenitic steel matrix (AISI 304) with 5% MgO partially stabilized ZrO₂ (MgO‐PSZ) was studied in‐situ in a scanning electron microscope (SEM). In‐situ tests in the SEM show the evolution of the microstructure with the strain for uniaxial deformation and the number of cycles during fatigue, respectively. Initially, deformation bands develop. In these bands, the face‐centred cubic austenite transforms into the hexagonal ε‐martensite and subsequently to the body‐centred cubic α'‐ martensite. This evolution was studied by different SEM techniques. Electron backscatter diffraction (EBSD) was applied for phase and orientation identification. The dislocation arrangement was investigated applying the electron channelling contrast imaging (ECCI) technique to different deformation stages. The studies are completed with measurements of local displacement fields using digital image correlation (DIC).     

Modelling of microbial enhanced oil recovery application using anaerobic gas-producing bacteria

Microbial enhanced oil recovery （MEOR） methods apply injection of bacteria to depleted oil reservoirs to produce oil, which had remained unrecovered after the conventional methods of production. The ability ofthermophilic anaerobic bacteria to produce gas as the main mechanism in potential MEOR in high salinities of 70-100 g/L was investigated in this study. Maximum gas production of up to 350 mL per 700 mL of salty solution was produced at a salinity of 90 g/L stably during 2-4 days of experiment. The experimental results were upscaled to the Snorre Oilfield, Norway, and simulated using ECLIPSE software for 27 months. The best scenarios showed that the increase in oil recovery on average was at 21% and 17.8% respectively. This study demonstrated that anaerobic bacteria used in biogas plants could be an attractive candidate for MEOR implementation due to their ability to withstand high temperature and salinity, and produce gas in large volumes.     

Trickle Bed Wetting Factors From Pressure Drop And Liquid Holdup Measurements

In this work, solid-liquid wetting factors were determined from liquid holdup and pressure drop measurements according to the model proposed by Pironti et al. for different air-liquid systems: distilled water and CMC solutions at viscosity values of 3, 6, 9, and 12 mPa.s. The experiments were carried out at atmospheric conditions in a column of 10.2 cm internal diameter and 2 m high, packed with a cylindrical material. The superficial mass velocities varied from 0.67 to 18.6 kg/m 2 s for liquid flow and from 0.024 to 0.31 kg/m 2 s for gas flow. Under these operating conditions, regime of continuous gas flow was observed. The wetting factors obtained were in agreement with those reported by other methods, which allow us to confirm that the model used in this work is applicable to fluids of different properties at low gas velocities.     

Conformationally constrained CCK8 analogues obtained from a rationally designed peptide library as ligands for cholecystokinin type B receptor

A library of 14 cyclic peptide analogues derived from the octapeptide C-terminal sequence of the human cholecystokinin hormone (CCK(26-33), or CCK8) was designed, synthesized, and characterized. The 14 peptide analogues were rationally designed to specifically interact with the CCK type B receptor (CCK(B)-R) on the basis of the structure of the bimolecular complex between CCK8 and the third extracellular loop of CCK(B)-R, namely CCK(B)-R(352-379). The rational design of new ligands for CCK(B)-R has relied on stabilization by cyclic constraints of the structural motifs that bring the key residues of the ligand (especially Trp 30, Met 31, and Phe 33) in the proper spatial orientation for optimal interaction with the receptor. The binding affinity of the new ligands for CCK(B)-R was assessed by displacement experiments of (111)In-radiolabeled CCK8 in cells that overexpress the CCK(B) receptor. The new ligands generally showed binding affinities lower than that of parent CCK8, with the best compounds having IC50 values around 10 microM. Structure-activity relationship data show that preservation of the Trp 30-Met 31 motif is essential and that the Phe 33 side chain must be present. NMR conformational studies of the compound with maximal binding affinity (cyclo-B11, IC50=11 microM) in DPC micelles shows that this compound presents a turn-like conformation centered at the Trp 30-Met 31 segment, as planned by rational design. Such a conformation is stabilized by its interaction with the micelle rather than by the cyclic constraint.     

Solid–Liquid Equilibria for the CO<Subscript>2</Subscript> + R143a and N<Subscript>2</Subscript>O + R143a Systems

A recently built experimental setup for determination of solid–liquid equilibria was slightly modified. The action taken on the existing system focused on correcting the drawbacks of the cooling system. In this version of the setup, a direct liquid nitrogen supply was preferred. By means of the modified apparatus, solid–liquid equilibria of the CO₂ + R143a and N₂O + R143a binary systems were studied. The triple point of R143a was measured to check the reliability of the modified apparatus, revealing good consistency with the literature. The system’s behavior was measured down to temperatures of 148 K. The results obtained for the mixtures were interpreted by means of the Schröder equation.     

Extrusion conditions and zea mays endosperm hardness affecting gluten‐free spaghetti quality

The effects of extrusion temperature (80, 90 and 100 °C) and flour moisture content (27%, 31% and 35%) on corn spaghetti quality were evaluated according to a factorial experimental design. Flours obtained from a soft and hard endosperm were processed in a Brabender single screw extruder. Corn spaghettis with good cooking characteristics and resistance to overcooking were obtained by extrusion at 27% flour moisture content for the three temperatures used. They have higher resistance to hydration, long cooking time (around 11 vs. 7 min for poor quality) and low cooking loss (lower than 9% for a 10‐min overcooking). Softer endosperm allowed obtaining better spaghetti quality. Among different physicochemical properties, enzyme susceptibility could be used as an indicator of mechanical energy dissipated by friction. During extrusion cooking, the native structure is partially destroyed, and new crystalline ones, corresponding to the amylose–lipid complex, are formed.     

Simultaneous effects of gelatin and espina corona gum on rheological,physical and sensory properties of cholesterol‐reduced probiotic yoghurts

The effects of gelatin (G) and espina corona gum (ECG) on rheological, physical and sensory properties of cholesterol‐reduced probiotic yoghurts were studied. The results showed that it was possible to efficiently remove the cholesterol (> 85%) and the probiotic microorganism counts were > 7 log₁₀ CFU.g^?1. The addition of G decreased flow behaviour index (n), while consistency index (K) increased with the addition of both thickeners. Thixotropy, initial shear stress of the clot to be deformed by mechanical action (A) and destruction rate of the structure (B) were enhanced by increasing G. ECG imparted greater creaminess, less grittiness and less astringency, while G gave more consistency. Both hydrocolloids helped to reduce acid taste and increased water retention index (> 95%). The optimum formulations were: 0.49% G – 0.41% ECG to obtain set yoghurts and 0.01% G – 0.43% ECG for stirred yoghurts, with desirable sensory, rheological and stability characteristics.