Design improvements on rotary valve particle feeders used for obtaining suspended airflows

The back repulsion of low density particles, sticking of particles in feeder valve and interlocking and cohesive archs of particles in feeder hopper have been widely observed problems of a conventional rotary valve feeder used for feeding of granular particles into an airflow line. In this study, these problems of the rotary valve feeders were isolated by means of novel modifications to its conventional design. Results of the modifications showed that the modified feeder can be sensitively used to feed granular particles with mass feeding rates ranging between 5±0.15 and 85±0.85 g/s without encountering problems experienced with conventional rotary valves.     

Effect of high hydrostatic pressure on physicochemical and biochemical properties of milk

Interest in high hydrostatic pressure (HHP) applications on milk and dairy products has recently increased as HHP offers a new technology for food preservation to the food industry. Although HHP-induced microbial destruction, rennet or acid coagulation of milk and increase in cheese yield has been reported, the actual effect of HHP application on milk constituents still remains to be unexplained. Therefore, we have analyzed the effect of HHP on physicochemical and biochemical properties such as turbidity, pH and especially protein micelle surface hydrophobicity of milk proteins. To serve for this purpose, milk samples with different fat contents were pressurized from 110 to 440 MPa at 25 °C for 10 and 20 min. Turbidity decreased with pressure increase and there was a slight change in pH. In order to measure the extent of exposure of hydrophobic groups of proteins to HHP, the method described by Bonomi et al. [1], based on use of a fluorescent probe, was utilized. In the light of the results obtained, it can be concluded that HHP has an effect on non-covalent interactions and especially hydrophobic bonds in milk. As the pressure is increased from 110 to 440 MPa, the micelles possibly decompose into sub-micelles and the embedded hydrophobic areas inside these micelles re-position in such a way that they can readily interfere with the fluorescent marker, ANS. These results may lead to practical applications of HHP treatment in the dairy industry to produce microbiologically safe, minimally processed products with high nutritional and sensory quality and novel texture.     

A Stream X-Machine Tool for Modelling and Generating Test Cases for Chronic Diseases Based on State-Counting Approach

Programming and Computer Software - In the biomedical domain, diagrammatical models have been extensively used to describe and understand the behaviour of biological organisms (biological agents)...     

Large-scale SRAM-based IP lookup architectures using compact trie search structures

SRAM-based pipelined architectures for high-speed IP lookup using Field Programmable Gate Arrays (FPGAs) has recently attracted a great deal of attention from researchers. Due to the limited amount of on-chip memory and the number of I/O pins of FPGAs, compact data structures providing high memory efficiency are in great demand.     

Viscoelastic and Processing Effects on the Fiber-Matrix Interphase Strength. Part I. The Effects of Loading Rate, Test Temperature, Fiber Sizing and Global Strain Level

The effects of loading rate, fiber sizing, test temperature and global strain level on the adhesion strength between carbon fibers and a thermosetting epoxy (Epon 815) are studied using the single fiber fragmentation test procedure. Analytical methodology describing the viscoelastic behavior observed is also presented. The possibility of rate-temperature-interphase thickness superposition for the interfacial strength function is illustrated based on the analytical models discussed. Experimental data are discussed using Weibull statistics and also presented in the form of percent relative frequency histograms for the fiber fragments in a collective fashion. The use of histograms allows for interpretation of the skewness in the data population.     

Fabrication of chitosan/polyvinyl alcohol/amine modified carbon nanotube composite films for rapid chromate removal

Composite adsorbent films with amine and hydroxyl functionalities were synthesized from chitosan (CS), polyvinyl alcohol (PVA), and amine-modified carbon nanotubes (a-MWCNT) by solvent casting method. Weight proportions of CS to PVA and weight percent of a-MWCNT were optimized to achieve highest chromate removal capacity. Structural characteristics of the composites were investigated using scanning electron microscopy, Fourier transform infrared spectroscopy, Raman spectroscopy, and thermal gravimetric analysis. Accordingly, incorporation of a-MWCNT to CS/PVA structure resulted in the generation of nanochannels, which enhanced adsorption capacity. Moreover, the composite comprising 0.4% wt. a-MWCNT provided over 99% of Cr (VI) removal from 50 mg L⁻¹ Cr (VI) solution within five minutes of contact time. Redlich–Peterson and Radke–Prausnitz isotherm models provided the highest conformity to adsorption data. Maximum chromate sorption capacity of CS/PVA/a-MWCNT composite film was determined as 134.2 mg g⁻¹ being 172% higher than that of CS/PVA. Regeneration was best achieved in 1.0 M NaOH and the composite was shown to retain at least 70% of its original capacity after five consecutive adsorption–desorption cycles.     

The current–voltage and capacitance–voltage characteristics of molecularly modified β-carotene/n-type Si junction structure with fluorescein sodium salt

β-Carotene–FSS organic semiconductor/n-type Si structure has been characterized by current–voltage and capacitance–voltage methods. A deviation in I–V characteristic of the diode is observed due to effect of series resistance and interfacial layer. Cheung's functions were used to calculate diode parameters. The ideality factor, series resistance and barrier height values of the diode are n = 1.77, R_s = 10.32 (10.39) kΩ and 0.78 eV. The obtained ideality factor suggests that Au/β-carotene–FSS/n-Si Schottky diode has a metal–SiO₂ oxide layer plus organic layer–semiconductor (MIOS) configuration. The capacitance–voltage characterizations of Au/β-carotene–FSS/n-Si diode at different temperatures were performed. The capacitance of the diode changes with temperature. The barrier height and ideality factor obtained from C–V curves are 0.67 eV and 1.68. The interface density properties of the diode are analyzed and the shape of the density distribution of the interface states is in the range of E_c −0.49 to −0.62 eV. It is evaluated that the FSS organic layer controls electrical charge transport properties of Au/β-carotene/n-Si diode by excluding effects of the β-carotene and SiO₂ residual oxides on the hybrid diode.     

Signal-adaptive discrete evolutionary transform as a sparse time–frequency representation

Discrete evolutionary transform (DET) has usually been applied to signals in a blind-way without using any parameters to characterize the signal. For this reason, it is not optimal and needs improvement by using some information about the signal. In this paper, we propose an improvement for the discrete evolutionary transform in order to obtain a sparse representation and redefine the generalized time-bandwidth product optimal short-time Fourier transform as a special case of it. In case of linear FM-type signals, the optimized kernel function of the transform is determined according to signal parameters including the instantaneous frequency. The performance of the adaptive-DET is illustrated on three distinct cases. In case of multi-component LFM signals, when the concentration of the proposed distribution is compared to the ordinary sinusoidal-DET, the improvement is computed as 28% in terms of the ratio of norms. Furthermore we define a new and a general class of distribution functions named as the short-time generalized discrete Fourier transform (ST-GDFT) which is a larger set of signal representations including the adaptive-DET.     

Using an artificial bee colony algorithm for the optimal placement of viscous dampers in planar building frames

In this study, an Artificial Bee Colony Algorithm (ABCA) is used to obtain the optimal size and location of viscous dampers in planar buildings to reduce the damage to the frame systems during an earthquake. The transfer function amplitude of the top displacement and the elastic base shear force evaluated at the first natural circular frequency of structures are chosen as objective functions. The damper coefficients of the added viscous dampers are taken into consideration as design variables in a planar building frame. Transfer function amplitude of the top displacement and the amplitude of the elastic base shear force at the fundamental natural frequency are minimized under an active constraint on sum of the damper coefficients of the added dampers. According to two specified objective functions, an optimization algorithm based on the ABCA is proposed. The proposed method is verified by a gradient-based algorithm; steepest direction search algorithm (SDSA). The proposed ABCA and the SDSA are applied to find the optimal damper distribution for a nine-storey planar building then the optimal damper allocation obtained from the ABCA is investigated to rehabilitate models of irregular planar buildings. The validity of the proposed method was demonstrated through a time history analysis of the optimal damper designs, which were determined based on the frequency domain using the ABCA. The numerical results of the proposed optimal damper design method show that the use of the ABCA can be a practical and powerful tool to determine the optimal damper allocation in planar building structures.