Heat transfer mechanism of a swirling impinging jet in a stagnation region

Heat transfer characteristics of a swirling impinging jet have been experimentally examined using a combined particle image velocimetry (PIV) and laser‐induced fluorescence (LIF) technique for simultaneous measurement of velocity and temperature fields. The present study shows that the radial width of the jet stretches with increasing swirl intensity, and that the stretching phenomenon contributes to the maximum local heat transfer coefficient. At the stagnation region, the flow near the heated surface is mixed intermittently by reverse flows toward upstream, and spatial distributions of temperature are correlated with instantaneous velocity vector maps. The dynamic behavior of recirculation zones, attributed to swirl number Sw and impinging distance, mainly determines the turbulent heat transfer at the stagnation region. © 2003 Wiley Periodicals, Inc. Heat Trans Asian Res, 32(8): 663–673, 2003; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/htj.10120     

FDTD analysis of switching characteristics in magnetooptic functional devices using magnetostatic surface waves

Collinear magnetooptic interaction with magnetostatic surface waves (MSSW) can be used for wavelength‐selective switches, wavelength filters, and frequency shifters in wavelength‐division‐multiplexed (WDM) photonic networks and optical processing systems. The switching efficiency can be improved with a multilayer waveguide structure. To investigate the dynamic switching characteristics, the FDTD method was employed. The mode conversion between TE and TM mode was successfully demonstrated with FDTD simulation. The filtering characteristics were also evaluated. The FDTD results were compared with the result from the coupled mode theory, and good agreement was obtained. Switching of an optical pulse was also demonstrated by the FDTD method. © 2007 Wiley Periodicals, Inc. Electr Eng Jpn, 162(1): 40–47, 2008; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20501     

Reuse of carwash water with a cellulose acetate ultrafiltration membrane aided by flocculation and activated carbon treatments

A reuse system for carwash water with a cellulose acetate (CA), hollow-fiber-type ultrafiltration membrane with the aid of flocculation and activated carbon treatments was proposed. The multi-blended flocculating agent containing bentonite, Al₂(SO₄)₃, sodium alginic acid and a cationic polyacrylamide showed higher removals of COD and turbidity for carwash wastewater compared with Al₂(SO₄)₃ or a water-soluble polymer individually. The effect of pure water permeability of the membrane on permeation flux in pretreated carwash wastewater by this agent was examined using three kinds of CA membranes whose molecular weight cut-offs were 150,000 Dalton. Permeation flux showed a higher value in the case of the membrane with higher pure water permeability. Practical scale experiments with a membrane area of 32 m² and 48 m² were conducted under a membrane pressure of 20 kPa. When carwash wastewater was pretreated with 50 mg/L of this multi-blended flocculating agent, permeation flux through the CA membrane with pure water permeability of 0.78 m³/(m²/h) at 100 kPa showed 1.0 m³/(m²/d) for more than 6 months. The COD, BOD and extract by n-hexane values of reuse water were 3.7-15.7 mg/L, 2.5-14.0 mg/L and below 0.5 mg/L, respectively.     

Out‐of‐Plane Strain Induced in a Moiré Superstructure of Monolayer MoS2 and MoSe2 on Au(111)

Making contact of transition metal dichalcogenides (TMDCs) with a metal surface is essential for fabricating and designing electronic devices and catalytic systems. It also generates strain in the TMDCs that plays significant role in both electronic and phonon structures. Therefore, detailed understanding of mechanism of the strain generation is important to fully comprehend the modulation effect for the electronic and phonon properties. Here, MoS₂ and MoSe₂ monolayers are grown on Au surface by chemical vapor deposition and it is demonstrated that the contact with a crystalline Au(111) surface gives rise to only out‐of‐plane strain in both MoS₂ and MoSe₂ layers, whereas no strain generation is observed on polycrystalline Au or SiO₂/Si surfaces. Scanning tunneling microscopy analysis provides information regarding consequent specific adsorption sites between lower S (Se) atoms in the S? Mo? S (Se? Mo? Se) structure and Au atoms via unique moiré superstructure formation for MoS₂ and MoSe₂ layers on Au(111). This observation indicates that the specific adsorption sites give rise to out‐of‐plane strain in the TMDC layers. Furthermore, it also leads to effective modulation of the electronic structure of the MoS₂ or MoSe₂ layer.     

Electrical conductivity and domain structure in ferroelastic Tl2SeO4

We have carried out the optical observation, electrical conductivity and ²⁰⁵Tl NMR measurements, and subsequently investigated the origin of the large conductivity above ferroelastic phase transition temperature T_c (=661 K) on the basis of the domain structure and the crystal structure. Electrical conductivity exhibits the discontinuous increase around T_c with increasing temperature and becomes approximately 5 × 10⁻³ S m⁻¹ above T_c. Moreover, from the ²⁰⁵Tl NMR measurements, it is found that mobile Tl ions exist above T_c. Furthermore, from the analysis of the domain structure based on the crystal structure in the low-temperature ferroelastic phase, it is also found that the anomalously large fluctuations of SeO₄ tetrahedrons exist above T_c. It is deduced from these results that the high electrical conductivity above T_c is caused by the mobile Tl ions closely related to the anomalously large fluctuations of SeO₄ tetrahedrons accompanied by the ferroelastic phase transition.     

Mechanism of Magnetite Seam Formation and its Role for FeO Scale Transformation

The phase transformation behavior of a thermally grown oxide scale of FeO on pure-Fe and an Fe–2wt%Au alloy was investigated. Particular attention was paid to formation of a magnetite seam, which is the Fe₃O₄ layer formed at the FeO/alloy interface at an initial stage of the phase transformation, since it has important effects on the overall phase transformation of FeO scale. A thin Au(Fe) layer was found to develop on the Fe–Au alloy at the FeO/alloy interface after 32 min of oxidation at 750 °C in air. This Au(Fe) layer prevented formation of a magnetite seam and accelerated the FeO eutectoid reaction. The Au(Fe) layer acted as a “chemical diffusion barrier” for inward diffusion of Fe from the FeO to the alloy substrate across the FeO/alloy interface and prevented magnetite seam formation.     

Determination of selenomethionine and selenocysteine in human serum using speciated isotope dilution-capillary HPLC-inductively coupled plasma collision cell mass spectrometry

A method for the accurate determination of selenoamino acids in human serum by HPLC-ICPMS was developed using the species-specific isotope dilution analysis principle. A serum sample was enzymatically digested with a mixture of lipase and protease after derivatization of the selenocysteine residues with iodoacetamide. The selenoamino acid fraction was isolated by size exclusion LC followed by the separation of selenomethionine and the carboxymethylated selenocysteine by capillary HPLC. The isotope-specific determination of 77Se and 80Se was achieved on-line by ICP collision cell MS allowing the removal of polyatomic interferences. Quantification was carried out by isotope dilution using a 77Se-labeled selenomethionine spike and the determination of the 77Se/80Se ratio in the cHPLC selenomethionine peak. The accurately determined selenomethionine was used as an internal standard for the selenocysteine determination from the same chromatogram. The modification of the previously developed cHPLC-ICPMS interface allowed the reduction of the absolute detection limits twice (down to the 75-fg level), which resulted in the lowest ever reported procedural detection limits (below 0.5 ng g(-1) for a 450-mg serum sample). The precision was less than 5% RSD. The method was validated by the mass balance of selenium (amino acid incorporated vs total).     

An X-ray absorption approach to mixed and metallicity-sorted single-walled carbon nanotubes

Carbon based structures have been widely studied by X-ray absorption (XAS), also called NEXAFS, which is a very useful bulk probing method that allows examining the unoccupied density of states (DOS) and the site selective bonding environment. Two very well known spectral features in the XAS core level spectrum are the σ* and π* bands, and both have been analyzed in several studies for graphitic-like systems. However, among all the carbon materials, the unique one-dimensional electronic properties attributed to single-walled carbon nanotubes (SWCNTs) exhibit features that reveal clearly their electronic structure in the core level XAS spectrum. In this article, we outline the C1s response in XAS, which is related to the DOS of the conduction band in SWCNTs and its fine structure, revealed by experiments performed on metallicity-sorted SWCNT material. The progress in the identification of changes in the site selective conduction band electronic structure with XAS is discussed in detail.     

Broadband characteristics analysis of semicircle‐type bow‐tie antenna with hole slots

For electromagnetic compatibility, broadband antennas are important for measurements of fast pulse transient electromagnetic phenomena and broadband characteristics due to noise and high‐frequency interference. We analyzed the characteristics of a semicircle type bow‐tie antenna with various slots using the FDTD method. It was shown from the simulation results that the shape and position of the slot influenced greatly the broadband characteristics of the antenna. We confirmed that a semicircle type bow‐tie antenna with a triangle slot was effective for a broadband antenna. © 2007 Wiley Periodicals, Inc. Electr Eng Jpn, 159(4): 47–53, 2007; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20252