A wafer level monitoring method for plasma-charging damage usingantenna PMOSFET test structure

A novel monitoring method for plasma-charging damage is proposed. This method performs a quick and accurate evaluation using antenna PMOSFET. It was found that not only hot-carrier (HC) lifetime but transistor parameters such as initial gate current and substrate current were changed according to the degree of plasma-charging damage. However, the present work suggests that monitoring the shift of drain current after a few seconds of HC stress is a more accurate method to indicate plasma-charging damage. The monitoring method using the present test structure is demonstrated to be useful for realizing highly reliable devices     

Theoretical model for flash generation

Reduction of flash generated in a gas vent is of great concern for manufacturers of electronic parts. The present study proposes a theoretical model for flash generation through consideration of flow characteristics in a gas vent. The model predicts the factors controlling flash, i.e., material parameters such as zero‐shear viscosity, crystallization temperature, thermal conductivity, and heat capacity, and process parameters such as injection and mold wall temperatures, packing pressure, and the clearance of a gas vent. On the other hand, we measure the amount of flash generated in the molding of poly(phenylene sulfide) (PPS) composites containing glass fiber and spherical fillers (CaCO₃ or Al₂O₃). Flash reduces with decreasing size of spherical fillers. These experimental data are successfully interpreted using the flash model. Polym. Eng. Sci., 45:198–206, 2005. © 2005 Society of Plastics Engineers     

Evaluation of myocardial damage using 123I-BMIPP imaging in patients with vasospastic angina

The purpose of this study is to determine whether left ventricular dysfunction following coronary artery spasm by 123I-BMIPP myocardial imaging. To reveal the clinical efficacy of 123I-BMIPP SPECT, 20 patients with vasospastic angina were studied using resting, 3-hour delayed image with 123I-BMIPP and exercise, 3-hour delayed image with 201Tl SPECT. 123I-BMIPP uptake was decreased compared to 201Tl (discordant) in 12 patients (60%) and in 49/100 myocardial segments (49%). The extent and severity score in resting image with 123I-BMIPP were significantly larger than that in delayed image with 201Tl (p < 0.01). In 123I-BMIPP SPECT, the severity score in the latest ischemia were significantly larger than that in others. The incidence of a complete agreement of decreased 123I-BMIPP uptake and coronary artery spasm was significantly higher (75%) than that in 201Tl (28%, p < 0.01). Furthermore, compared to 201Tl uptake, decreased 123I-BMIPP uptake much more corresponded to reduced wall motion in 9 of patients with mismatching. The severity of regional wall motion abnormality was significantly correlated with severity score of 123I-BMIPP. Late redistribution in delayed image with 123I-BMIPP was seen in 6 patients. The regional washout rate and the severity of regional wall motion abnormality in 6 patients was significantly lower than that in others (p < 0.05). Thus, metabolic abnormality assessed by 123I-BMIPP is well associated with left ventricular asynergy and spastic region in patients with vasospastic angina. In conclusion, 123I-BMIPP SPECT may sensitively delineate the impaired myocardium following coronary artery spasm, and it is very useful in diagnosing and estimating the severity of vasospastic angina.     

Monte Carlo simulation of hydrogen absorption in palladium and palladium–silver alloys

A modified Monte Carlo (MC) simulation was performed to investigate the hydrogen absorption behavior in Pd and Pd–Ag alloys of the composition Pd_xAg_1−x (x=0.7–0.8) under H₂ pressure (0.1 MPa) at different temperatures. The present method employed can consider the dissociative adsorption of hydrogen molecule and the subsequent absorption of hydrogen atom by formalizing the relationship between the pressure of hydrogen molecule and hydrogen atom. The potential parameters were determined to reproduce the solution enthalpy of hydrogen in pure metals. The results are in good agreement with experimental findings as well as previous theoretical studies. We confirmed that our method is useful to simulate the absorption of hydrogen in metals and alloys.     

Quantitative evaluation of generator power control effect of FACTS controllers for power system stabilization

The advancement of power electronics technologies has significantly developed the power system stabilizing controllers. Quantitative as well as qualitative evaluation of their effectiveness in power systems is a matter of great importance for the feasibility investigation of these apparatus. In this paper, the possible control region of FACTS controllers with series and/or shunt configuration in a single machine to infinite bus system is formulated in the powerangle curve with a set of algebraic equations. The effectiveness of TCPST (Thyristor‐Controlled Phase Shifting Transformer), SSSC (Static Synchronous Series Compensator), and TCSC (Thyristor‐Controlled Series Compensator) for the improvement of the transient stability is evaluated quantitatively as a numerical example. The correctness of the proposed method has been confirmed by analysis based on the electromagnetic transients simulation with a detailed system model. © 2001 Scripta Technica, Electr Eng Jpn, 138(3): 43–51, 2002     

Fast modular multiplications based on precomputations with lessmemory

A fast modular multiplication method based on precomputation is proposed for use in public-key cryptosystems. The proposed method can compute the Montgomery reduction TR¹ mod N only through additions. Furthermore, this is 6.4 times faster than the Montgomery method implemented in modular reduction with a 512 bit modulus when 2.1 MB of memory is used. This memory size is also only 1/4 of that required in the method proposed by Takenaka et al     

A 1-Gb/s/pin 512-Mb DDRII SDRAM using a digital DLL and a slew-rate-controlled output buffer

A 1-Gb/s/pin 512-Mb DDRII SDRAM has been developed using a digital delay-locked loop (DLL) and a slew-rate-controlled output buffer. The digital DLL has a frequency divider for DLL input, performs at an operating frequency of up to 500 MHz at 1.6 V, and provides internal clocking with 50% duty-cycle correction. The DLL has a current-mirror-type interpolator, which enables a resolution as high as 14 ps, needs no standby current, and can operate at voltages as low as 0.8 V. The slew-rate impedance-controlled output buffer circuit reduces the output skew from 107 to 10 ps. This SDRAM was tested using a 0.13-/spl mu/m 126.5-mm/sup 2/ 512-Mb chip.     

A New Process to Make a Porous PTFE Structure from Aqueous PTFE Dispersion with the Help of Hydrogel

A novel method to make a porous material having relatively large cell diameter (200–300 m), which consisted of mainly poly(tetrafluoroethylene) (PTFE), was developed from aqueous PTFE dispersion by using the characteristics of hydrogel with the addition of carbon nanofiber (CNF). The porous material was produced as follows: firstly, an aqueous agar gel containing PTFE and CNF was prepared; secondly, the gel was freeze-dried; thirdly, the dried gel was heat-treated at 400°C where the agar was almost decomposed and PTFE became molten. The porous material showed electric conductivity (about 50 ), high porosity (about 96 vol%), and relatively uniform cell structures without shrinkage during freeze drying and heat treatment. While the method without CNF resulted in large shrinkage during heat treatment, meaning that CNF prevented the shrinkage. It was explained by the idea that the existence of rigid CNF, which was dispersed in the cell wall, prohibited the shrinkage of PTFE during heat treatment. It was unexpectedly found by SEM analysis that the porous materials had another macro-porous structure inside the cell wall, suggesting that the developed materials had a double porous structure.     

Fat splitting by the twitchell process at low temperature

Summary A study was made of the degree of splitting of coconut and soybean oils by the Twitchell process at 35±0.1°C. with no shaking or stirring, using an agent consisting mainly of tetrabutyl naphthalene sulfonic acid with water or dilute sulfuric acid. The degree of splitting was greater with sulfuric acid than with water. In general, the degree of splitting of soybean oil was greater when the sulfonic acid was dissolved in the oil layer than when it was in water. The reverse was true with coconut oil. Although addition of glycerol had no effect on the degree of splitting, addition of glacial acetic acid to the coconut oil system decreased fat splitting to a considerable extent. Addition of coconut fatty acids to the coconut oil system had little effect, but soybean fatty acids added to the soybean oil system markedly increased the degree of splitting. For the first time it has been demonstrated that, at 35±0.1°C., splitting of a fat by the Twitchell process occurs in a stepwise way. Coconut oil in contact with 1N sulfuric acid containing the sulfonic acid, corresponding to 1% by the weight of the oil, was about 90% split in 15 to 30 days, depending on the area of contact of the two layers. The diglyceride concentration reached a maximum during the early days of the reaction and then decreased somewhat. Monoglyceride concentration appeared to reach a maximum more slowly and then continued at that level as the concentrations of free fatty acids and glycerol steadily increased. Presented at the symposia on fat of the Chemical Society of Japan, Nov. 10, 1954, and Nov. 8, 1955, Nagoya, Japan; and the 8th annual meeting of the Chemical Society of Japan, Apr. 2, 1955, Tokyo, Japan.