Cyanogenic,carotenoids and protein composition in leaves and roots across seven diverse population found in the world cassava germplasm collection at CIAT,Colombia

The objective of this study was to characterise the nutritional potential of leaves and identify a diversity centre with low cyanide and high nutrient content among 178 Latin American cassava genotypes. This field-based collection represents the seven diversity centres, held at The International Center for Tropical Agriculture (CIAT Palmira, Colombia) by the Cassava Program. The cyanide, all-trans-β-carotene and lutein concentrations in cassava leaves ranged from 346 to 7484 ppm dry basis (db), from 174–547 μg g⁻¹ db and 15–181 μg g⁻¹ db, respectively. Cassava leaves also showed significant levels of essential amino acids leucine, lysine, phenylalanine, valine and threonine, and average total protein content of 26.24 g 100 g⁻¹ db. Among seven diversity centres, South American rainforest group showed low cyanide and high carotene content in leaves. In addition, VEN77 and PAN51 genotypes stood out for having low cyanide in leaves and roots and high carotene in leaves. This genetic diversity can be used to select high potential progenitors for breeding purposes.     

Characterization of the Ion Beam Current Density of the RF Ion Source with Flat and Convex Extraction Systems

Silicon - The characterization of ion beam current density distribution and beam uniformity is crucial for improving broad-beam ion source technologies. The design of the broad ion beam extraction...     

Long-term energy scenarios for Mexico: Policy options for carbon savings and main barriers

This paper shows that possibilities exist for maintaining current energy-related carbon emissions per capita in Mexico at almost constant levels in the long term. It is argued, however, that the identified carbon emissions reductions will not be achieved easily or rapidly, as they require a restructuring of Mexico's current technological base and an unusual degree of coordination among the government, lending institutions, equipment manufacturers, and final users. Such changes also will entail surmounting major institutional and financial barriers and creating a better international environment for technology transfer and capital lending.     

Apparent diffusion coefficient determination of sodium hydroxide through potato skin and flesh under different temperatures and concentration conditions

The aims of the present study were to analyze the most important chemical reactions between sodium hydroxide and potato constituents involved in potato chemical peeling, and to measure the apparent diffusivity of NaOH in potato skin and flesh separately, as a function of temperature and NaOH concentration, selected according to potato chemical peeling process. Chemical reaction of the suberin of the potato skin with NaOH was proposed as the most important one to promote chemical peeling. Whereas starch hydrolysis, middle lamella dissolution and cell wall disruptions were proposed as the principal chemical reactions in flesh. Experiments to determine NaOH apparent dijfusivities in skin and flesh were performed following a cell diffusion method at 25, 40, 50, 60 and 70 °C temperatures and concentrations of 4, 12 and 20 g NaOH/100 g of solution. Finally, correlation equations were determined to describe apparent diffusivity dependence on temperature and concentration.     

Comparison of morphologic assessment of hypertrophic cardiomyopathy by magnetic resonance versus echocardiographic imaging

To compare the value of echocardiography and magnetic resonance imaging (MRI) in the assessment of the amount and extent of hypertrophy in hypertrophic cardiomyopathy (HC) and, second, to correlate the degree of hypertrophy, as assessed by MRI, with clinical and electrocardiographic parameters, 30 consecutive patients (16 men and 14 women, aged 20 to 74 years) with HC were studied. Measurements of left ventricular wall thickness were performed at 11 predetermined segments (5 basal, 5 midventricular, and 1 apical) by 2-dimensional echocardiography and MRI. Two parameters derived from MRI studies were considered as indicators of the degree and extent of hypertrophy: (1) mean of the measured wall thickness at the 11 segments, and (2) the number of segments with thickness > 15 mm. Results showed that, from a total of 330 myocardial segments, thickness could be measured by echocardiography in 221 (67%), whereas MRI allowed measurement of 320 segments (97%). When compared with clinical and electrocardiographic data, no correlation was found regarding mean wall thickness and number of hypertrophied segments by MRI except for the presence of an abnormal electrocardiographic repolarization pattern. It is concluded that MRI allows a better assessment of the degree and extension of left ventricular hypertrophy than echocardiography in HC. Despite the precise information on hypertrophy provided by MRI, the amount and degree of hypertrophy bears no correlation with most of the clinical data in these patients.     

Gas-phase selective oxidation of toluene on TiO2–sepiolite supported vanadium oxides: Influence of vanadium loading on conversion and product selectivities

Gas-phase selective oxidation of toluene has been carried out on vanadium oxide systems (5–20 wt.% of V₂O₅, equivalent to 0.4–1.7 theoretical monolayers) supported on TiO₂–sepiolite (with titania loading around the theoretical monolayer, 12 wt.%) and on sepiolite. A study has been made on both the influence of vanadia loading and of the support on the catalytic behaviour of the supported vanadium systems. The reducibility by H₂ TPR was also studied as well as the acid and basic/redox sites from the results of conversion of the 2-propanol test reaction of the solids. Benzaldehyde, benzoic acid and several coupling products were the main ones detected, attaining over 50% selectivity towards the benzaldehyde and benzoic acid products at a total conversion around 10%. The activity and selectivity to the selective products exhibited by vanadium systems supported on mixed support were superior to those exhibited by the systems supported on sepiolite and increased notably in both series with the increase in vanadium loading. The best catalytic behaviour exhibited by the vanadium systems supported on mixed support, which also exhibited the highest density of sites capable of being reduced (as well as their reducibility) and of those responsible for propanone formation, could be attributed not only to the different balance of the vanadia species existing in the two supports (monomeric + oligomeric/polymeric), but also to such other factors as the nature of the support and, concretely, its chemical composition.     

Modelling the rate of secondary succession after farmland abandonment in a Mediterranean mountain area

Secondary succession after farmland abandonment has become a common process in north Mediterranean countries, especially in mountain areas. In this paper, a methodology is tested which combines Markov chains and logistic multivariate regression to model secondary succession after farmland abandonment in environments where abiotic constraints play a major role, like mountain areas. In such landscapes, a decay in the succession rate with time is usually found, as the best locations are progressively occupied. This is frequently addressed using non-stationary Markov chains. Here, we test if the combination of logistic multivariate regression with Markov chains, however, allows for spatially distributed transitions probabilities based on abiotic factors and therefore, it is able to reproduce the preferential colonization of the most favourable locations. The model is tested in the Ijuez Valley in the Spanish Pyrenees, which underwent generalized land abandonment during the 1950s. Results confirm a substantial improvement in the prediction success of the Markov-logistic model when compared to the standard Markov chain approach. As a result, the decay in the succession rate can be successfully modelled. The specific results for our study area are discussed further in an ecological context. The methodology proposed is applicable to any landscape where vegetation dynamics are constrained by environmental factors. However, the inclusion of land use as an explanatory factor would be necessary in human-managed landscapes.     

Ethylene-propylene copolymers by a supported Ziegler-Natta catalyst based on TiCl4/MgCl2

Ethylene-propylene copolymers have been prepared by using Ziegler-Natta catalysts based on TiCl₄, MgCl₂, PCl₃ and (n-Bu)₃PO₄. The catalysts TiCl₄/MgCl₂/PCl₃ and TiCl₄/MgCl₂/(n-Bu)₃PO₄ were prepared by reacting TiCl₄ with pretreated MgCl₂. The support was prepared by ball milling of MgCl₂ with varied amounts of PCl₃ or (n-Bu)₃PO₄. The addition of PCl₃ has remarkably increased the MgCl₂ surface area in comparison with (n-Bu)₃PO₄. The effects of PCl₃ and (n-Bu)₃PO₄ on ethylene homopolymerization, ethylene-propylene copolymerization and on copolymer properties were evaluated. The catalyst system containing PCl₃ permitted to synthesize propylene-ethylene copolymers with up to 75% (w/w) of propylene and provided control of copolymer crystallinity. The reduction of the copolymer molecular weight distribution suggested that PCl₃ acted as an internal donor, poisoning some active catalytic sites. Received: 2 April 1997/Revised: 6 June 1997/Accepted: 18 June 1997     

La_(1.8)Ca_(0.2)Mg_(14)Ni_3合金在甲苯溶液中球磨改性后的储氢性能

采用在甲苯介质中球磨以改善La1.8Ca0.2Mg14Ni3的储氢性能。随着球磨时间的增加,合金的吸放氢性能得到显著地提高,在20 h达到最高。其在513 K,4.0 MPa氢压下初次活化时,吸氢质量分数达到了3.95%,在3次活化后,300 K时的吸氢质量分数达到3.85%,在613 K,一个大气压的放氢质量分数在900 s内达到了4.92%。通过XRD和SEM分析,球磨后合金颗粒粒径明显减小且有非晶化趋势。在球磨过程中形成了电子络合体(electrondonor-acceptor,EDA)体系。合金颗粒粒径、非晶化程度和EDA共同作用使球磨20 h的合金表现出最优异的吸放氢性能。     

Biodegradability and improved mechanical performance of polyhydroxyalkanoates/agave fiber biocomposites compatibilized by different strategies

In this work, biocomposites made of polyhydroxyalkanoates (PHA) with natural fibers were produced via compression molding. In particular, polyhydroxybutyrate (PHB) and polyhydroxybutyrate-co-hydroxyvalerate (PHBV) were reinforced with 20 wt% of agave fibers. Different compatibilization strategies were investigated to improve the fiber-matrix interaction: fiber surface treatment in PHA solution, fiber surface treatment in maleated PHA solution, fiber propionylation, and extrusion with maleated PHA. The biocomposites were characterized in terms of morphology, mechanical properties, water absorption, and biodegradability by CO₂ production tracking. In general, fiber propionylation was the best strategy for mechanical properties enhancement and water uptake decreasing. Biocomposites with propionylated fibers showed improved flexural strength (170% for PHB and 84% for PHBV). The flexural modulus was also enhanced with propionylated fibers up to 19% and 18% compared to uncompatibilized biocomposites (PHB and PHBV, respectively). Tensile strength increased by 16% (PHB) and 14% (PHBV), and the water absorption was reduced using propionylated fibers going from 6.6% to 4.4% compared with biocomposites with untreated fibers. Most importantly, the impact strength was also improved for all biocomposites by up to 96% compared with the neat PHA matrices. Finally, it was found that the compatibilization did not negatively modify the PHA biodegradability.