Cisplatin plus oral etoposide in the treatment of patients with advanced small cell lung cancer. Japan Clinical Oncology Group

BACKGROUND: Etoposide is a highly schedule-dependent drug. We investigated combination chemotherapy of oral etoposide and intravenous cisplatin for small cell lung cancer (SCLC). METHODS: Fifty-seven patients with SCLC with extensive disease (ED) or limited disease (LD) with pleural effusion registered in the 21 institutions of the Japan Clinical Oncology Group were treated with oral etoposide 40 mg/m2/d for 21 days and cisplatin 80 mg/m2 on day 1 of every 28-period day. The entry period was between February 1992 and August 1995. The actual percentages of patients treated with etoposide were 93.6, 89.5, 92.3 and 96.9% in the first, second, third and fourth cycles, respectively. RESULTS: Nine patients (15.8%) achieved a complete response resulting in an overall response rate of 82.5% (95% confidence interval, 70.1-91.3%). Leukopenia and thrombocytopenia of grade 3 or 4 were observed in 36 (49.1%) and 8 (14.0%) patients, respectively. Anemia of grade 3 or 4 occurred in 28 (49.1%) patients. Nausea, vomiting, anorexia and alopecia were common adverse events. One patient died of hemoptysis due to grade 4 thrombocytopenia. The mean survival time was 47.0 weeks. CONCLUSIONS: This dose and schedule of administration of etoposide in combination with cisplatin are considered to be clinically active. However, prolonged gastrointestinal toxicity of oral etoposide was a problem in comparison with the standard etoposide platinum regimen given by intravenous administration.     

An Engineered Biliverdin-Compatible Cyanobacteriochrome Enables a Unique Ultrafast Reversible Photoswitching Pathway

Cyanobacteriochromes (CBCRs) are promising optogenetic tools for their diverse absorption properties with a single compact cofactor-binding domain. We previously uncovered the ultrafast reversible photoswitching dynamics of a red/green photoreceptor AnPixJg2, which binds phycocyanobilin (PCB) that is unavailable in mammalian cells. Biliverdin (BV) is a mammalian cofactor with a similar structure to PCB but exhibits redder absorption. To improve the AnPixJg2 feasibility in mammalian applications, AnPixJg2_BV4 with only four mutations has been engineered to incorporate BV. Herein, we implemented femtosecond transient absorption (fs-TA) and ground state femtosecond stimulated Raman spectroscopy (GS-FSRS) to uncover transient electronic dynamics on molecular time scales and key structural motions responsible for the photoconversion of AnPixJg2_BV4 with PCB (Bpcb) and BV (Bbv) cofactors in comparison with the parent AnPixJg2 (Apcb). Bpcb adopts the same photoconversion scheme as Apcb, while BV4 mutations create a less bulky environment around the cofactor D ring that promotes a faster twist. The engineered Bbv employs a reversible clockwise/counterclockwise photoswitching that requires a two-step twist on ~5 and 35 picosecond (ps) time scales. The primary forward P_fr → P_o transition displays equal amplitude weights between the two processes before reaching a conical intersection. In contrast, the primary reverse P_o → P_fr transition shows a 2:1 weight ratio of the ~35 ps over 5 ps component, implying notable changes to the D-ring-twisting pathway. Moreover, we performed pre-resonance GS-FSRS and quantum calculations to identify the Bbv vibrational marker bands at ~659,797, and 1225 cm⁻¹. These modes reveal a stronger H-bonding network around the BV cofactor A ring with BV4 mutations, corroborating the D-ring-dominant reversible photoswitching pathway in the excited state. Implementation of BV4 mutations in other PCB-binding GAF domains like AnPixJg4, AM1_1870g3, and NpF2164g5 could promote similar efficient reversible photoswitching for more directional bioimaging and optogenetic applications, and inspire other bioengineering advances.     

Free energy perturbation study on a Trp-binding mutant (Ser88 ->Cys) of the trp-repressor

The Ser⁸⁸Cys mutant of the trp-repressor showed a lower affinityfor the corepressor than the wild-type repressor [G = 1.7 ±0.3 kcal/mol, Chou and Matthews (1989) J. Biol. Chem., 264,18314–18319].A molecular dynamics/free energy cycle perturbation study wasperformed to understand the origin of the decreased affinity.A value (G = 1.58 ± 0.28 kcal/mol) comparable with theexperimental value was obtained by the simulation. Free energycomponent analysis revealed that destabilization of the vander Waals interaction between Ser⁸⁸ and Trp¹⁰⁹ (corepressor)mainly contributed to the decreased affinity of the mutant.The rotational transition of the hydroxyl (sulfhydryl) groupof Ser⁸⁸ (Cys⁸⁸) during the simulations affected the contributionsof Arg⁸⁴ and water to the free energy change in the aporepressorand those of Arg⁸⁴ and Trp ¹⁰⁹ to that in the holorepressor.However, the contributions from different residues compensatedeach other, and the total free energy changes were almost invariablein the various simulations.     

Metal Single-Atom Cocatalyst on Carbon Nitride for the Photocatalytic Hydrogen Evolution Reaction: Effects of Metal Species

Single-atom (SA) catalysts exhibit high activity in various reactions because there are no inactive internal atoms. Accordingly, SA cocatalysts are also an active research fields regarding photocatalytic hydrogen (H₂) evolution which can be generated by abundant water and sunlight. Herein, it is investigated whether 10 transition metal elements can work as an SA on graphitic carbon nitride (g-C₃N₄; i.e., gCN), a promising visible-light-driven photocatalyst. A method is established to prepare SA-loaded gCN at high loadings (weight of ≈3 wt.% for Cu, Ni, Pd, Pt, Rh, and Ru) by modulating the photoreduction power. Regarding Au and Ag, SAs are formed with difficulty without aggregation because of the low binding energy between gCN and the SA. An evaluation of the photocatalytic H₂-evolution activity of the prepared metal SA-loaded gCN reveals that Pd, Pt, and Rh SA-loaded gCN exhibits relatively high H₂-evolution efficiency per SA. Transient absorption spectroscopy and electrochemical measurements reveal the following: i) Pd SA-loaded gCN exhibits a particularly suitable electronic structure for proton adsorption and ii) therefore they exhibit the highest H₂-evolution efficiency per SA than other metal SA-loaded gCN. Finally, the 8.6 times higher H₂-evolution rate per active site of Pd SA is achieved than that of Pd-nanoparticles cocatalyst.     

Effect of resin monomer composition on toothbrush wear resistance

BACKGROUND: The study was carried out to evaluate the correlation between blood-retinal barrier (BRB) permeability and the progression of diabetic retinopathy (DR), defined by development of "need for photocoagulation", over a 7-year period by means of vitreous fluorometry (VF). METHODS: Forty type 2 diabetic patients with minimal or no retinopathy, aged 40-65 years (mean 53.9 + 7.3 years), were followed up prospectively for 7 years. Investigations including standard ophthalmological examination, fundus photography, fluorescein angiography and VF were performed at entry and 1, 4, 5 and 7 years later. Only one eye per patient was included in the study. Need for photocoagulation was based on Early Treatment Diabetic Retinopathy Study protocols and decided by the attending ophthalmologist. RESULTS: After 7 years of follow-up a total of 22 of the 40 eyes had received photocoagulation. The eyes that needed photocoagulation were those that had higher VF values at the entry of the study and showed higher rates of deterioration (initial values 5.1 + 1.9 vs 2.8 + 1.5 x 10(-6) min-1, P < 0.001; annual increase in leakage for the first year, 1.5 + 0.8 vs 0.5 + 1.0 x 10(-6) min-1, P < 0.001,). The eyes that did not need photocoagulation during the 7 years of follow-up showed stable VF readings (-0.1 + 1.2 x 10(-6) min-1, difference between initial values and 7 years later). CONCLUSIONS: Abnormally high VF values and their rapid increase over time are good indicators of progression and worsening of the retinopathy in diabetes type 2.     

Detection method of emerging leading papers using time transition

To survive worldwide competitions of research and development in the current rapid increase of information, decision-makers and researchers need to be supported to find promising research fields and papers. But finding those fields from an available data in too much heavy flood of information becomes difficult. We aim to develop a methodology supporting to find emerging leading papers with a bibliometric approach. The analyses in this work are about four academic domains using our time transition analysis. In the time transition analysis, after citation networks are constructed, centralities of each paper are calculated and their changes are tracked. Then, the centralities are plotted, and the features of the leading papers are extracted. Based on the features, we proposed ways to detect the leading papers by focusing on in-degree centrality and its transition. This work will contribute to finding the leading paper, and it is useful for decision-makers and researchers to decide the worthy research topic to invest their resources.     

Development of a simple method for fabrication of transparent conductive films with high mechanical strength

We have developed a simple method of fabricating transparent conductive films with a high mechanical strength on glass and indium tin oxide substrates. It does not require a large excess of organic solvents and polymerization catalysts and can yield smooth films by spin-coating of a mixture of a commercially available aqueous dispersion of poly(3,4-ethylenedioxythiophene)-poly(4-styrene sulfonate) and a neat liquid of tetraethyl orthosilicate. Preparation conditions such as feed ratio, kinds of additives, and annealing temperature and time were optimized to give highly conductive, transparent and mechanically strong films.     

Boronic acid‐based thin films that show saccharide‐responsive multicolor changes

A novel saccharide sensor that displays a distinct color change resembling a “traffic signal” was developed. By copolymerizing boronic acid and amine monomers on a glass plate, a boronic acid‐containing thin film was obtained. Anionic blue and yellow dyes were adsorbed on the thin film, and the film was immersed in aqueous saccharide solutions containing a cationic red dye. With increase in the saccharide concentration in the solution, the thin film changes color from green to red via yellow. The observed distinct changes in color were attributed to a stepwise release and binding of dyes. The sensitivity of the saccharide sensor was dependent on the monomer composition of the thin film and increased with increasing the boronic acid content. The pH of the saccharide solution was another key factor affecting the sensing behavior, and glucose‐responsive color changes were significantly enhanced at pH 7.8. By optimizing these conditions, significant color changes in response to glucose were achieved. Saccharide selectivity was found to be in the following order: fructose > glucose > galactose = mannose > sucrose. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42679.     

Digital watermarking by a holographic technique

A holographic technique is applied for digital watermarking by a computer. A digital-watermark image to be hidden is phase modulated in a random fashion, and its Fourier-transformed hologram is superposed on a content image. The watermark is reconstructed by means of a holographic-reconstruction technique from the bit-map image that hides it. In the study the processes of constructing and reconstructing a digital hologram are described on the basis of the theory of Fourier optics. The conditions for superposing the hologram onto the content images are investigated in detail. The validity of the present method is verified by changing the weighting of the hologram relative to that of the content image. The effect of image size is also discussed with respect to reconstruction of the watermark, and it is shown that watermark information in a form of a diffuse-type Fourier-transform hologram cannot be removed by cutting it out of the host image.     

Recombinant Long-Acting Thioredoxin Ameliorates AKI to CKD Transition via Modulating Renal Oxidative Stress and Inflammation

An effective strategy is highly desirable for preventing acute kidney injury (AKI) to chronic kidney disease (CKD) transition. Thioredoxin-1 (Trx), a redox-active protein that has anti-oxidative and anti-inflammatory properties, would be a candidate for this but its short half-life limits its clinical application. In this study, we examined the renoprotective effect of long-acting Trx that is comprised of human albumin and Trx (HSA-Trx) against AKI to CKD transition. AKI to CKD mice were created by renal ischemia-reperfusion (IR). From day 1 to day 14 after renal IR, the recovery of renal function was accelerated by HSA-Trx administration. On day 14, HSA-Trx reduced renal fibrosis compared with PBS treatment. At the early phase of fibrogenesis (day 7), HSA-Trx treatment suppressed renal oxidative stress, pro-inflammatory cytokine production and macrophage infiltration, thus ameliorating tubular injury and fibrosis. In addition, HSA-Trx treatment inhibited G2/M cell cycle arrest and apoptosis in renal tubular cells. While renal Trx protein levels were decreased after renal IR, the levels were recovered by HSA-Trx treatment. Together, HSA-Trx has potential for use in the treatment of AKI to CKD transition via its effects of modulating oxidative stress and inflammation.