Selectivity of partial hydrogenation reactions performed in a pore-through-flow catalytic membrane reactor

The selectivity of partial hydrogenation reactions of unsaturated substrates was studied in a membrane reactor operating at 323 K and 40 bar hydrogen pressure. The reactor system was constructed as a loop of a saturation vessel and a membrane module in which the reaction mixture was resaturated with hydrogen up to 100 times. In a porous membrane made from cross-linked polyacrylic acid palladium nanoparticles were incorporated as catalysts. A well-defined residence time within the membrane was achieved due to a defined pore structure of the membrane and a convective mass flow of the reaction mixture through the membrane. The selectivity for the partially hydrogenated products was investigated as a function of the pore size of the PAA membrane and was compared to commercially available catalysts. Compared to experiments with supported catalysts (Pd/C and Pd/Al₂O₃) in a slurry and a fixed bed reactor the selectivity for the desired products could be increased by 3% (1-octyne) up to 40% (geraniol).     

A Multicriteria Decision Support Methodology for Annual Rehabilitation Programs of Water Networks

Abstract:   This article provides an overview of a multicriteria decision support methodology for annual rehabilitation programs of water networks. A first set of criteria is formulated for the purpose of comparing and ranking rehabilitation projects. Each proposed criterion is a measure of a particular impact of the condition of a pipe. The ELECTRE TRI method is implemented for defining rehabilitation priorities . Two reference profiles are used to define the limits of three categories associated with three increasing priority levels. With these two reference profiles, applying the ELECTRE TRI method to an asset stock ( a set of pipes that are candidates for rehabilitation ) means assigning each pipe to one of six possible priority groups. A second set of criteria, based on the concept of efficiency, is proposed for comparing alternative rehabilitation programs ( subsets of the asset stock ).     

Thermal blooming and photoluminescence characterizations of sol–gel CdO–SiO<Subscript>2</Subscript> with different nanocomposite

The CdO NPs was synthesized using the sol–gel method and the nanoparticles were characterized using an UV–Vis spectrophotometer, with shape and size were examined by SEM and XRD. The XRD analysis respects the Bragg’s law and confirmed the crystalline nature of CdO nanoparticles. From the XRD, the average size of CdO NPs was found to be around 41 nm. The photoluminescence spectra of the CdO NPs, as recorded at room temperature, were excited at 300 nm wavelength. The broad emission peaks were between 600 and 650 nm (orange emission). The optical limiting performance of the nanocomposite was described in the sol–gel state. Also, this study has observed and studied the diffraction rings generated in CdO NPs using the same CW laser. The number of rings increases almost exponentially with an increasing volume fraction of SiO₂ in the nanocomposites. The refractive index change, Δn, and effective nonlinear refractive index, n ₂, were found to be 10^?4 and 10^?8 cm²/W, respectively. The effective nonlinear refractive index, n ₂, was determined based on the observed number of rings. The threshold values of the CdO, CdO–2SiO₂ and CdO–5SiO₂ nanocomposites are 7.1, 6.55 and 6.34 mW, respectively. This large nonlinearity is attributed to the thermal effect. The present studies suggest that the nanocomposite is a potential candidate for optical device applications such as the optical limiters. The thermal blooming technique was applied to evaluate the thermo-optic coefficient and thermal diffusivity of the CdO NPs. In the thermal blooming experimental setup a transistor–transistor logic modulated CW laser of wavelength 532 nm was used as the excitation source.     

Estimating postprandial glucose fluxes using hierarchical Bayes modelling

A new stochastic computational method was developed to estimate the endogenous glucose production, the meal-related glucose appearance rate (R(a meal)), and the glucose disposal (R(d)) during the meal tolerance test. A prior probability distribution was adopted which assumes smooth glucose fluxes with individualized smoothness level within the context of a Bayes hierarchical model. The new method was contrasted with the maximum likelihood method using data collected in 18 subjects with type 2 diabetes who ingested a mixed meal containing [U-(13)C]glucose. Primed [6,6-(2)H(2)]glucose was infused in a manner that mimicked the expected endogenous glucose production. The mean endogenous glucose production, R(a meal), and R(d) calculated by the new method and maximum likelihood method were nearly identical. However, the maximum likelihood gave constant, nonphysiological postprandial endogenous glucose production in two subjects whilst the new method gave plausible estimates of endogenous glucose production in all subjects. Additionally, the two methods were compared using a simulated triple-tracer experiment in 12 virtual subjects. The accuracy of the estimates of the endogenous glucose production and R(a meal) profiles was similar [root mean square error (RMSE) 1.0±0.3 vs. 1.4±0.7μmol/kg/min for EGP and 2.6±1.0 vs. 2.9±0.9μmol/kg/min for R(a meal); new method vs. maximum likelihood method; P=NS, paired t-test]. The accuracy of R(d) estimates was significantly increased by the new method (RMSE 5.3±1.9 vs. 4.2±1.3; new method vs. ML method; P<0.01, paired t-test). We conclude that the new method increases plausibility of the endogenous glucose production and improves accuracy of glucose disposal compared to the maximum likelihood method.     

Anomalous dielectric response of very small quantities of virgin, aged and failed silicone oil

A technique is described for making dielectric spectroscopy measurements of very small quantities (<1 /spl mu/l) of oil. The technique utilises surface tension to hold the oil between the plates of a capacitor, the inter-electrode distance being controlled by a micrometer. Breakdown strength can also be estimated using this technique. Three samples of silicone oil, used in cable sealing ends, were tested: virgin, used and failed. A major component in the frequency dependent impedance had the form Z(/spl omega/) = B(1-b(i/spl omega/)/sup 1-p/). This component was interpreted in terms of a fractal percolation model, and the anomalous thickness dependence predicted by the model verified by varying the inter-electrode distance. The difference observed for the three different samples indicate that conducting contaminants are responsible for the percolation system.     

A comprehensive simulation model for immunity prediction in integrated circuits with respect to substrate injection

This paper presents a comprehensive modelling methodology for the electromagnetic immunity of integrated circuits (ICs) to direct power injection (DPI). The aim of this study is to predict the susceptibility of ICs by the means of simulations performed on an appropriate electrical model of different integrated logic cores located in the same die. These cores are identical from a functional point of view, but differ by their design strategies. The simulation model includes the whole measurement setup as well as the integrated circuit under test, its environment (PCB, power supply) and the substrate model of each logic core. Simulation results and comparisons with measurement results demonstrate the validity of the suggested model. Moreover, they highlight the interest of the aforementioned protection strategies against electromagnetic disturbances.     

High‐resolution solid‐state NMR investigation of the filler–rubber interaction: 2. High‐speed [1H] magic‐angle spinning NMR spectroscopy in carbon‐black‐filled polybutadiene

This work investigates the behaviour of elastomeric chains (polybutadienes of identical molecular weight but different microstructures) in the close vicinity of carbon black surfaces in order to attain a better understanding of the structure and properties of interphases. Elastomer–filler interactions are assessed through the study of the thermal properties and NMR relaxation characteristics of the corresponding materials. Three series of samples were compared: pure polymers, raw polymer–filler blends (filler loading ratio: 50 phr) and solvent‐extracted blends (so as to get rid of any polymer which is not under the influence of the solid surface). While differential scanning calorimetry points to the existence of an elastomer fraction which is not detected as undergoing the glass transition, ie is strongly immobilized, [¹H] high‐resolution high‐speed magic‐angle spinning solid‐state NMR provides information on the effect exerted by polymer–filler interactions on the mobility of the various constitutive species of the macromolecular backbone. A systematic study of the evolution of the spectral lines yielded by the samples indicates that 1,2‐polybutadiene moieties have a particular affinity towards the carbon black surface which suggests the occurrence of specific interactions at the elastomer–filler interface. © 2001 Society of Chemical Industry     

Evaluating location management schemes for third generation mobile networks

Several strategies have been proposed recently to improve the performance of the IS-41 location management scheme. A forwarding pointers' strategy and a built-in memory strategy are proposed to reduce the signaling cost for location update and improve the IS-41 location update procedure. In this paper, we present a performance analysis of each strategy in an arbitrary time interval. In this analysis, users are classified by their call to mobility ratio which is defined as the call arrival rate divided by the mobility rate. We evaluate each of these strategies using this call to mobility ratio in order to come up with a set of recommendations that determine when each strategy is beneficial and for which class of users. We provide also a simplified analysis of the database loads generated by each strategy.     

A geometric note on integration

We propose a decomposition principle for the Riemann–Stieltjes integration and study some of its implications which lead to three distinct forms for the Riemann integral for monotonically varying differentiable functions.     

A cluster-based trust-aware routing protocol for mobile ad hoc networks

Routing protocols are the binding force in mobile ad hoc network (MANETs) since they facilitate communication beyond the wireless transmission range of the nodes. However, the infrastructure-less, pervasive, and distributed nature of MANETs renders them vulnerable to security threats. In this paper, we propose a novel cluster-based trust-aware routing protocol (CBTRP) for MANETs to protect forwarded packets from intermediary malicious nodes. The proposed protocol organizes the network into one-hop disjoint clusters then elects the most qualified and trustworthy nodes to play the role of cluster-heads that are responsible for handling all the routing activities. The proposed CBTRP continuously ensures the trustworthiness of cluster-heads by replacing them as soon as they become malicious and can dynamically update the packet path to avoid malicious routes. We have implemented and simulated the proposed protocol then evaluated its performance compared to the clustered based routing protocol (CBRP) as well as the 2ACK approach. Comparisons and analysis have shown the effectiveness of our proposed scheme.