Dark Current and Signal-to-Noise Ratio in BDJ Image Sensors

In this paper, analytical expressions of dark currents and equivalent noise generators of a CMOS color image sensor are presented, and the signal-to-noise ratio (SNR) at both outputs is evaluated. Static measurements and simulations on Austria Micro Systems 0.35-mum CMOS test structures yield guidelines to increase the SNR of the buried double junction photodetector     

Corrosion behaviour in physiological fluids of surface films formed on titanium alloys

The properties of the surface films formed on Ti and its Ti–5Al–4V and Ti–6Al–3.5Fe alloys by chemical (immersion in 10 M NaOH) and thermal treatment (500 °C) were studied in this paper. Their corrosion behaviour in Ringer solution was investigated. After treatments, the sample microhardness was measured. Also, the sample surfaces were observed by an optical microscope before and after immersion in Ringer solutions. The electrochemical behaviour of the surface films obtained by the chemical and thermal treatments was studied using the methods of the electrochemical impedance spectroscopy (EIS) and monitoring of open circuit potentials at different immersion periods (up to 60 days) in Ringer solution. Microhardness increased with the increasing loads for the studied materials, showing the existence of a compact protective layer. Microscopic observations exhibited more compact coatings after 60 days of exposure in Ringer solution, due to the formation of an apatite layer. EIS spectra revealed surface films with two layers: an inner, barrier protective layer and an outer, porous apatite layer. The impedance increases in time denoting that the films have grown by apatite nucleation. Also, EIS spectra showed that the complex treatment by chemical + heat method is the most efficiently. For the samples treated by the two processes (chemical + heat) the values of the open circuit potentials are nobler than of the chemical treated samples, denoting better protective, bioactive films.     

Sorption/release of diclofenac sodium in/from free‐standing poly(acrylic acid)/poly(ethyleneimine) multilayer films

Polyelectrolyte multilayer films deposited onto various substrates have been used extensively as drug delivery systems. However, little attention has been paid to the release of drugs from free‐standing polymeric films. Herein, we report the construction of thermal crosslinked free‐standing poly(acrylic acid) (PAA)/branched poly(ethyleneimine) (PEI) multilayer films composed of 25 double layers [(PAA/PEI)₂₅] and their use in sorption/release of diclofenac sodium (DS). The (PAA/PEI)₂₅ multilayer films were characterized by scanning electron microscopy, potentiometric titrations and Fourier transform infrared spectroscopy, while the sorption/release of DS was monitored by UV – Vis spectroscopy. The DS sorption equilibrium data were fitted with five isotherm models (Langmuir, Freundlich, Sips, Dubinin–Radushkevich, and Temkin). The maximum equilibrium sorption capacity, q_m, given by the Langmuir model was 32.42 mg DS/g. The Korsmeyer–Peppas semiempirical equation showed that the release of DS from the free‐standing (PAA/PEI)₂₅ films proceeded by pseudo‐Fickian diffusion, irrespective of the releasing media. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43752.     

Use of FIB to Study ZDDP Tribofilms

Focussed ion beam milling (FIB) followed by TEM has been used to study ZDDP tribofilms on rubbed steel surfaces. It has been found that the impact of high energy platinum and gallium ions during FIB causes significant morphological and structural changes to the uppermost 30–50 nm of a ZDDP tribofilm. This can be prevented by the low energy deposition of a quite thick gold layer prior to installation of the sample in the FIB facility. This problem, and its solution, have been quite widely reported in the non-tribology literature but have not previously been highlighted in the application of FIB to study tribological surfaces. It has also been found, using this gold pre-deposition method, that the bulk of the ZDDP tribofilm studied has a polycrystalline structure.     

Primary solid tumors of the mesentery

The interest for the primary solid tumors of the mesentery (TSPM) is justified by the difficulties of preoperative diagnosis and surgical treatment of these unusual lesions. We analyzed 68 TSPM operated in the Department of General Surgery of Fundeni Hospital between 1960-1993. In the study were included only the lymphoma presented as mesenteric masses (n = 17); the enlarged mesenteric lymph nodes were excluded. The most common malignant tumor was the fibroma (n = 8) and lipoma (n = 10). In the resection of mesenteric tumors exposure of the superior mesenteric vessels is important. The relation between tumoral and superior mesenteric vessels is the necessary criterion of resectability: in 41 cases from 43 unresectable lesions the reason of unresectability was the invasion of the superior mesenteric vein and artery; in only two cases the reason was the presence of liver metastases. The resectability was not influenced by the multiplicity of the lesions: in all cases with multiple mesenteric tumors (6 patients) the resection was performed. The distant metastases of TSPM are rare; on the contrary, the local invasion is common.     

Specific interactions in ternary system quaternized polysulfone/mixed solvent

Theoretical and experimental aspects on the specific interactions developed via electrostatic interactions and hydrogen‐bonding in a ternary system formed of a proton‐donor solvent (N,N‐dimethylformamide or methanol), a proton‐acceptor solvent (water), and a quaternized polysulfone with various contents of ionic chlorine, which indicates a proton‐acceptor character, are investigated. Thus, the interactions of the ternary systems are corrected on the basis of the association phenomena defined through association constants. Numerical values for these constants were evaluated as a function of the system composition, by mathematical simulations for an accurate adjustment of preferential adsorption, determined by the Flory–Huggins–Pouchly theoretical approach applied to the experimental data. POLYM. ENG. SCI., 2009. © 2008 Society of Plastics Engineers     

Surface and interface properties of functionalized polysulfones: Cell‐material interaction and antimicrobial activity

Quaternized polysulfones with different ionic chlorine content tested for biomedical applications were obtained by quaternization reaction of chloromethylated polysulfones with N,N‐dimethylethanolamine. The relationship between the different physical and chemical characteristics of these polymers and their biocompatible and antimicrobial properties was established for maximizing the selectivity and performance of these materials for biomedical applications. Therefore, topographic reorganization of the polysulfonic films induced by the type of nonsolvent in casting solutions of polymer significantly influences films morphology, depending on the charge density of polyelectrolytes, the hydrophilic/hydrophobic characteristics, as well as on the history of the formed films. Furthermore, the study of the adhesion of red blood cells and cohesion of platelets on the surface of quaternized polysulfone films, as well as analysis of antibacterial activity, using Pseudomonas aeruginosa ATCC 27853 and Staphylococcus aureus ATCC 25923 microorganisms, contribute to extending the possible applications of quaternized polysulfones as semipermeable membranes in biomedical domains. POLYM. ENG. SCI., 55:2184–2194, 2015. © 2015 Society of Plastics Engineers     

Impact of Some Properties of Quaternized Polysulfone/Poly(Vinylidene Fluoride) Blend on the Potential Biomedical Applications

Blends of quaternized polysulfones with triphenylphosphonium pendant groups/poly(vinylidene fluoride) were analyzed to establish their impact on the rheological, morphological and surface properties, as well as their interactions with some blood compounds. The rheological functions reflect the influence of both polymers’ chemical structures. Blend compositions of the corresponding films influence the surface tension parameters, increase blend hydrophobicity and, implicitly, decrease the polar surface tension parameters. The specific surface characteristics of polymer blends are related to their interactions with some blood constituents and plasma proteins. Also, the specific microarchitecture of the blend represents an excellent scaffold for medical applications.     

Microstructure,mechanical properties,and corrosion resistance of Ti-20Zr alloy in undoped and NaF doped artificial saliva

The corrosion behavior of a new, advanced Ti-20Zr alloy with α+β microstructure (determined by optical microscopy, XRD, and SEM) and very good mechanical properties (obtained from the stress-strain curve) is studied in this paper. The composition of the alloy native passive film was determined from a XPS analysis and the long-term corrosion resistance in undoped and doped states with 0.05M NaF artificial Carter-Brugirard saliva of different pH values, simulating the severe functional conditions of a dental implant, was analyzed by electrochemical methods. This alloy possesses an advantageous balance between good mechanical resistance and plasticity and Young’s modulus and exhibits more favorable electrochemical parameters and corrosion resistance than CP Ti due to its more resistant passive layer containing Ti₂O₃, TiO₂, and ZrO₂ protective oxides. After 1000 h of immersion in saliva, the protective properties of the alloy were enhanced due to the deposited surface layer that incorporated protective phosphates (shown by SEM and XPS).