Auswirkungen von Blitzschlägen auf 20-kV-Energiekabel

Recently appeared defects on high voltage cables have required an urgent evaluation of the impact of lightning strikes necessary. In some cases overvoltages between the copper wire screen of the cable and earth may appear which cause damages of the cablesheath. Field measurements with a classification of the voltage impulses at the copper wire screen have been made to evaluate the number of events. Additionally a numerical model was developed to study the effects of atmospheric discharges on underground cables with emphasis to the influence on the cablesheath. This numeric method was also applied to estimate the effectiveness of different protection arrangements. This contribution presents evaluation methods for overvoltages of cables and a model used firstly for calculating the stress caused by differential voltages and secondly to determinate the influence of protection measures.     

Hilfsmittel zum Auffinden einer ersten Gestalt beim methodischen Konstruieren: Gestaltbeeinflussung durch die Verwendung physikalischer Effekte

Zusammenfassung Ziel des Teilvorhabens, über das hier berichtet wird, was es, für eine Auswahl von physikalischen Effekten eine Zuordnung von gestaltbeeinflussenden Merkmalen auf sehr abstrakter Ebene zu erreichen und damit eine n?here Charakterisierung der Wirkfl?chen und Wirkr?ume zu erreichen die zur Umsetzung eines physikalischen Effektes notwendig sind. Die hieraus resultierenden Ergebnisse sind dem Abschlu?bericht zu entnehmen [1]. Weiterführende Themen, die basierend auf den vorliegenden Erkenntnissen bearbeitet werden, haben zum Ziel, die wesentlichen und entscheidenden Parameter einer Konstruktionsaufgabe zu erkennen und zukünftig zielgerichtet L?sungsvarianten zu erstellen, um somit für eine Neukonstruktion sinnvolle L?sungsfelder sehr frühzeitig abzugrenzen.     

Thermography of aged contacts of high voltage equipment

New developments in diagnostic tools and systems are necessary for a reliable and economic evaluation of the condition of equipment in power systems. In a research project a tool for the condition of contacts of centre break disconnector, which is used under normal operation by the aid of a thermography measurement system, has been developed. In this paper, an overview about the laboratory investigation of the temperature load behaviour and the environmental influence on-site for new and aged disconnector contacts are given. A condition evaluation tool for contacts, which was the aim of the project, has been created. The basic method for the evaluation is presented, and also two additional easements for a fast identification of suspect contacts are presented. With this evaluation tool and the usage of a thermography based measuring system, a condition based maintenance strategy can be applied, whereby an early detection of damages is possible and so power quality and reliability increase.      

Transmission Electron Microscopy and Electron Energy-Loss Spectroscopy Characterization of Glass Phase in Sol-Gel-Derived Mullite

Sol-gel-derived mullite ceramics were processed by pressureless sintering at 1600°, 1650°, and 1700°C for 4 h. Microstructural and microchemical characterization of the mullite materials was performed using transmission electron microscopy, in conjunction with energy-dispersive X-ray spectroscopy and electron energy-loss spectroscopy (EELS). Apart from mullite grain diameter and triplepocket size, no major microstructural changes were observed with increasing sintering temperature. Residual glass was present at triple pockets and along two-grain junctions. Not all grain boundaries revealed the presence of a continuous amorphous intergranular film. Clean interfaces were observed only at boundaries with one grain parallel to the [001] orientation (low-energy configuration). Quantitative EELS analysis of mullite grains and glass pockets revealed only small changes in composition with increasing sintering temperature; i.e., the alumina:silica ratio slightly increased for mullite and glass. The analysis implied that mullite with this relatively high aluminum content would not be stable adjacent to residual glass. However, a stable glass-mullite system has been proposed, because impurity cations were detected within glass pockets, which suggested a slight shift of the subsolidus line (glass-mullite/ mullite) to a higher amount of alumina. Energy-loss nearedge structure studies of the Si- L _2,3 edge revealed a similar near-edge structure for the mullite, residual glass, and quartz. Thus, SiO₄ tetrahedra were thought to be the main building units of the glass contained in sintered mullite.     

Erosion of unfilled elastomers by solid particle impact

The response has been studied of eight unfilled elastomers (four natural rubber compounds, epoxidized natural rubber ENR50, butyl rubber, polybutadiene and polyurethane) to erosion by 150 m silica sand at an impact velocity of 48 m sec^–1. All were tested at an impact angle of 30°, close to the impact conditions occurring in pipe bends, while two were also tested at 90°. Wide variations in erosion rate were observed between different rubbers. These differences did not correlate systematically with the nature of the base elastomer, glass transition temperature or mechanical properties such as hardness, tensile strength or ultimate tensile elongation, nor with resistance to abrasive wear. Good correlation was, however, found with rebound resilience. A high resilience tended to imply high erosion resistance, The erosion rate was found empirically to be proportional to the quantity (1 - fractional resilience) raised to the power 1.4. Different surface morphologies were found in specimens of high and low resilience after erosion at 30°. Finely spaced transverse ridges formed on high-resilience rubbers, whereas surface features on low-resilience rubbers showed no directionality. Preliminary conclusions are drawn about possible mechanisms of material removal.     

Investigation of transport phenomena in a hybrid ion exchange-electrodialysis system for the removal of copper ions

Hybrid ion exchange electrodialysis processes allow the removal of metal ions from dilute waste liquids and the recovery of more concentrated solutions. The work reported here was aimed at investigating the two steps in the treatment process, namely, adsorption of metal ions onto the packed bed of resin and electromigration (i.e., the transport of these ions in the complex system under the applied electrical field). The case of copper sulfate was investigated. Dowex resins with a cross-linking degree of 2 and 8% were used. The flux of copper through the resin bed and the current efficiency for ion transfer to the cathode compartment were determined as a function of potential gradient and copper ionic fraction in the bed. Apparent diffusion coefficients of Cu²⁺ in the overall system were deduced from the experimental data.     

Online Coloring of Bipartite Graphs with and without Advice

In the online version of the well-known graph coloring problem, the vertices appear one after the other together with the edges to the already known vertices and have to be irrevocably colored immediately after their appearance. We consider this problem on bipartite, i.e., two-colorable graphs. We prove that at least ?1.13746?log₂(n)?0.49887? colors are necessary for any deterministic online algorithm to be able to color any given bipartite graph on n vertices, thus improving on the previously known lower bound of ?log₂ n?+1 for sufficiently large n. Recently, the advice complexity was introduced as a method for a fine-grained analysis of the hardness of online problems. We apply this method to the online coloring problem and prove (almost) tight linear upper and lower bounds on the advice complexity of coloring a bipartite graph online optimally or using 3 colors. Moreover, we prove that \(O(\sqrt{n})\) advice bits are sufficient for coloring any bipartite graph on n vertices with at most ?log₂ n? colors.     

Interactions in compatible polymer systems

Summary Dynamic mechanical measurements on polystyrene — poly(vinylmethylether) blends are demonstrating that the relaxation processes in the blends are mainly connected with the motions of the poly(vinylmethylether) chain.Concerning the effect of mixing on topological properties of the blends, an increase of the polydispersity of the relaxation processes is detected in blends with high molecular weight polystyrene while low molecular weight polystyrene exerts an effect of dilution upon the relaxation of the high molecular poly(vinylmethylether) chains.From these measurements as well as from thermoanalytical data it results that the energetic interaction is more pronounced in the blends with oligomeric than with high molecular weight polystyrene. The glass transition temperature shows a larger deviation from additivity for blends with high molecular polystyrene than for those with oligomeric polystyrene.Herrn Prof. Dr. M. Kryszewski zum 60. Geburtstag herzlichst gewidmet     

Grain-Boundary Wetting-Dewetting in z= 1 SiAlON Ceramic

The grain-boundary structure of a model SiAlON polycrystal with nominal composition Si₅AlON₇ was characterized by transmission electron microscopy (TEM) both in an equilibrium (as-processed) state at room temperature and after quenching from elevated temperature. In addition, low-frequency (1–13 Hz) internal friction data were recorded as a function of temperature, showing a pronounced grain-boundary sliding peak positioned at 1030°C. High-resolution transmission electron microscopy (HRTEM) of the equilibrated low-temperature microstructure revealed residual glass only at multigrain junctions, but no amorphous intergranular films were observed. The detection of clean interfaces in the as-processed sample contradicts the internal friction data, which instead suggests the presence of a low-viscosity grain boundary phase, sliding at elevated temperatures. Therefore, a thin section of the as-sintered material was heated to 1380°C and rapidly quenched. HRTEM analysis of this sample showed, apart from residual glass pockets, wetted grain boundaries, which is in line with the internal friction experiment. This wetting-dewetting phenomenon observed in z = 1 SiAlON is expected to have a strong impact not only on high-temperature engineering ceramics but also on geological, temperature-activated processes such as volcanic eruptions.