The World robot summit disaster robotics category – achievements of the 2018 preliminary competition

The World Robot Summit is a robot Olympics and aims to be held in a different country every four years from 2020. The concept of the Plant Disaster Prevention challenge is daily inspections, checks, and emergency response in industrial plants, and in this competition, robots must carry out these types of missions in a mock-up plant. The concept of the Tunnel Disaster Response and Recovery challenge is emergency response to tunnel disasters, and is a simulation competition whereby teams compete to show their ability to deal with disasters, by collecting information and removing debris. The Standard Disaster Robotics challenge assesses, in the form of a contest, the standard performance levels of a robot that are necessary for disaster prevention and emergency response. The World Robot Summit Preliminary Competition was held at Tokyo Big Sight in October 2018, and 36 teams participated in the Disaster Robotics Category. UGVs and UAVs contended the merits of new technology for solving complex problems, using core technologies such as mobility, sensing, recognition, performing operations, human interface, autonomous intelligence etc., as well as system integration and implementation of strategies for completing missions, gaining high-level results.     

Computation of mutual entropy in quantum markov chains

There are several damping phenomena in quantum optics. Such phenomena have been usually explained by open systems. In statistical physics, open system dynamics have been used to study the irreversibility and the approach to equilibrium. In this paper, the dynamical change of the mutual entropy for an open system, frequently studied in the quantum optics literature, is rigorously computed through a model of quantum Markov chain. In particular, the concrete formula of Stinespring expression for such a model is obtained and applied to the derivation of the mutual entropy, and some computational results are presented.     

Effect of Milling on Slip Casting of Partially Stabilized Zirconia

Specimens of partially stabilized zirconia were slip cast from aqueous suspensions and sintered at 1500°C for 3 h. The relative density of the cast specimens and the firing shrinkage of the sintered specimens depend on the milling time for the suspension. Vickers hardness and K_IC values of 11.46±s0.07 GN/m² and 6.10 ±0.04 MN.m^3/2, respectively, were obtained for all sintered specimens. The dispersion of the suspension is important in increasing the relative density of the cast specimens.     

Bias-stress-induced increase in parasitic resistance of InP-based InAlAs/InGaAs HEMTs

The reliability of InP-based HEMTs is studied, focussing on how it is affected by the doped layer material and gate recess structure. Bias-and-temperature stress tests reveal that fluorine-induced donor passivation in the recess region, formed adjacent to the gate electrode, causes the source resistance (R_s) to increase at large drain bias voltages. The increase in R_s can be prevented by using InP or InAlP as the carrier supply layer material instead of InAlAs. On the other hand, the increase in the drain resistance (R_d) does not depend on the material of the carrier supply layer, which suggests that a mechanism different from that in the case of R_s should be considered. It is also found that a deep gate recess suppresses the increase in R_d after long-term stressing.     

STRUCTURE FORMATION OF COATED FILMS WITH DISPERSED PIGMENTS DURING DRYING

In the drying of coated films with dispersed pigments, such as floppy disks, the structure of the film is formed during the drying process and depends on the drying condition. It is important to understand the structure formation during drying for the design of the dryer and die better quality of the product. We measured die drying characteristics of the film and determined the structure of dried film experimentally. A qualitative model for the structure formation during drying of the coated film is suggested.     

Path planning for an autonomous mobile robot considering a region with a velocity constraint in a real environment

Recently, many research projects and competitions have attempted to find an autonomous mobile robot that can drive in the real world. In this article, we consider a path-planning method for an autonomous mobile robot that would be safe in a real environment. In such a case, it is very important for the robot to be able to identify its own position and orientation in real time. Therefore, we applied a localization method based on a particle filter. Moreover, in order to improve the safety of such autonomous locomotion, we improved the path-planning algorithm and the generation of the trajectory so that it can consider a region with a limited maximum velocity. In order to demonstrate the validity of the proposed method, we participated in the Real World Robot Challenge 2010. The experimental results are given.     

Influence of silicon on the growth of barrier-type anodic films on titanium

Amorphous anodic titania, stabilised by incorporation of silicon species, is shown to grow to high voltages on sputter-deposited, single-phase Ti-Si alloys during anodizing at a constant current density in ammonium pentaborate electrolyte. The films comprise two main layers, with silicon species confined to the inner layers. An amorphous-to-crystalline transition occurs at ∼60 V on the Ti-6 at.% Si alloy, while the transition is suppressed to voltages above 140 V on alloys with 12 and 26 at.% silicon. The crystalline oxide, nucleated at a depth of ∼40% of the film thickness, is associated with the presence of a precursor of crystalline oxide in the pre-existing air-formed oxide. The modified structure of the air-formed oxide due to increased incorporation of silicon species suppresses the amorphous-to-crystalline transition until the onset of dielectric breakdown. The transport numbers of cations and anions during growth of the anodic oxides are independent of the concentration of silicon species in the inner layer, despite the marked change in the field strength.     

Role of metal ion impurities in generation of oxygen gas within anodic alumina

The generation of oxygen gas within an amorphous anodic alumina film is reported. The film was formed by anodizing aluminum, which was first electropolished and then chemically polished in CrO₃-H₃PO₄ solution, in sodium tungstate electrolyte. The procedure results in incorporation of mobile Cr³⁺ species, from the chemical polishing film, and mobile W⁶⁺ species, from the electrolyte, into the amorphous structure. The tungsten species are present in the outer 27% of the film thickness, while Cr⁶⁺ species occupy a thin layer within the tungsten-containing region. Above the Cr³⁺ containing layer, a band develops that contains oxygen bubbles of a few nanometres size. The oxygen is generated by oxidation of O²⁻ ions of the alumina. A mechanism of oxygen generation within the alumina is proposed based on the electronic band structure of the oxide, modified by the Cr³⁺ and W⁶⁺ species, and on the ionic transport processes during oxide growth.     

Formation of phase structure and crystallization behavior in blends containing polystyrene–polyethylene block copolymers

The microphase separation structure in the molten state and the structure formation in crystallization from such ordered melt were investigated for the blends of polystyrene–polyethylene block copolymers (SE) with polystyrene homopolymer (PS) and polyethylene homopolymer (PE) and for the blends consisting of two kinds of SE with different copolymer compositions from each other, using synchrotron small-angle X-ray scattering techniques (SAXS). The copolymer compositions of SE block copolymers employed were 0.34, 0.58 and 0.73 wt. fraction of PE, and their melt morphologies were cylindrical, lamellar and lamellar, respectively. Macrophase separation or the morphology change in the melt occurred depending on the molecular weight and the blend composition, as reported so far. In crystallization from such macrophase-separated and microphase-separated melts, the melt morphology was completely kept for all the blends. Crystallization behavior was also investigated for the blends. The crystallization within the spherical and cylindrical domains surrounded by glassy PS was not observed for SE/PS blends. In the crystallization from the macrophase-separated melt, two exothermal peaks were observed in the DSC measurements, while a single peak was observed for other blends. For the blends with PS, the degree of crystallinity was depressed and the apparent activation energy of crystallization was high, compared to those for the corresponding neat SE. For SE/PE and SE/SE blends, those were changed depending on the blend composition.