Multiple-gate SOI MOSFETs: device design guidelines

This paper describes computer simulations of various SOI MOSFETs with double and triple-gate structures, as well as gate-all-around devices. The concept of a triple-gate device with sidewalls extending into the buried oxide (hereby called a "/spl Pi/-gate" or "Pi-gate" MOSFET) is introduced. The Pi-gate device is simple to manufacture and offers electrical characteristics similar to the much harder to fabricate gate-all-around MOSFET. To explore the optimum design space for four different gate structures, simulations were performed with four variable device parameters: gate length, channel width, doping concentration, and silicon film thickness. The efficiency of the different gate structures is shown to be dependent of these parameters. The simulation results indicate that the the Pi-gate device is a very promising candidate for future nanometer MOSFET applications.     

Classification of geographical origin of kimchi by volatile compounds analysis using an electronic nose

Food Science and Biotechnology - Food authenticity is one of the largest concerns in recent days. As kimchi has been a global food, its production origin has been important issue, particularly due...     

Molecular cloning and characterization of a thermostable α-amylase exhibiting an unusually high activity

An α-amylase gene was cloned from the thermophilic bacterium Bacillus subtilis isolated from Indonesian oil palm shell waste. The gene expressed an extracellular enzyme. Optimal hydrolysis conditions for the enzyme were 70°C and pH 6.0. The specific activity of the enzyme was 16.0 kU per mg of protein, which was higher than for other thermostable amylases. Hydrolytic products of the enzyme using starch and glycogen were mainly maltohexaose and maltopentaose. The enzyme had a K _m value of 0.099 mg/mL for amylopectin, more than 10 times lower than for amylose. The catalytic efficiency of the enzyme using amylopectin was 39,200 mL/mg·s and was 3,270 mL/mg·s using amylose. The enzyme liquefied corn starch at pH 5.0, which was successfully converted to glucose using commercial glucoamylase and pullulanase without pH adjustment. The enzyme has advantages for industrial applications.     

Sensitivity analysis of ion implanted silicon wafers after rapid thermal annealing

In this study, we have investigated sensitivities of the ion implanted silicon wafers processed by rapid thermal annealing (RTA), which can reveal the variation of sheet resistance as a function of annealing temperature as well as implantation parameters. All the wafers were sequentially implanted by the arsenic or phosphorous implantations at 40, 80, and 100 keV with the dose level of 10¹⁴ to 2 × 10¹⁶ ions/cm². Rapid thermal annealing was carried out for 10 s by the infrared irradiation at a temperature between 850 and 1150°C in the nitrogen ambient. The activated wafer was characterized by the measurements of the sheet resistance and its uniformity mapping. The values of sensitivities are determined from the curve fitting of the experimental data to the fitting equation of correlation between the sheet resistance and process variables. From the sensitivity values and the deviation of sheet resistance, the optimum process conditions minimizing the effects of straggle in process parameters are obtained. As a result, a strong dependence of the sensitivity on the process variables, especially annealing temperatures and dose levels is also found. From the sensitivity analysis of the 10 s RTA process, the optimum values for the implant dose and annealing temperature are found to be in the range of 10¹⁶ ions/cm² and 1050-1100°C, respectively. The sensitivity analysis of sheet resistance will provide valuable data for accurate activation process, offering a guideline for dose monitoring and calibration of ion implantation process.     

Theory Of Markovian Access to Collision Channels

In this paper, a unified, analytical framework for analysis of Markovian access control protocols in collision channels with a finite number of buffered users is presented. The theory developed is based on: 1) an appropriate state-space modeling of a network, 2) the averaging theory for the slow-in-the-average Markov walks used for the local analysis, and 3) an asymptotic large deviations theory used for the global analysis. Specific new results obtained here are: 1) formulas for the steady-state buffer OCCupancy and the probability of packet rejection, 2) a relationship between the capacity of the users buffers and the steady-state throughput, time delay, and the probability of packet rejection, 3) an asymptotic formula for the saturation period, and 4) a new adaptive protocol, the adaptive TDMA, is constructed, and it is shown that it is superior to the adaptive ALOHA system.     

On pattern classification of EMG signals for walking motions

We present a method to calssify electromyogram (EMG) signals which are utilized as control signals for a patient-responsive walker-supported system for paraplegics. Patterns of EMG signals for different walking motions are classified via adequate filtering, real EMG signal extraction, AR-modeling, and a modified self-organizing feature map (MSOFM). In particular, a data-reducing extraction algorithm is employed for real EMG signals. Moreover, MSOFM classifies and determines the results automatically using a fixed map. Finally, the experimental results are presented for validation.     

The adverse effects of fine particle air pollution on respiratory function in the elderly

There is increasing concern that airborne particles are critical risk factors for adverse health conditions in susceptible populations. The objective of this panel study is to investigate an association between particulate matter and the peak expiratory flow rate (PEFR) in the elderly and to compare estimated risks using PM10 or PM2.5 levels as a measure of exposure. During a 2-year longitudinal follow-up study, we contacted subjects living in an asylum for the elderly, provided them with a mini-Wright peak flow meter, and instructed to record all the flow readings, any respiratory symptoms, passive smoking activity, and hours spent outdoors for that given day. Daily levels of particulate matter were measured by two separate mini-volume air samplers (for PM10 and PM2.5) placed on the rooftop of the two-story residence asylum building. In our statistical models, we assumed that the expected response varied linearly for each participant with a slope and intercept that depended on fixed or time-varying covariates using a mixed linear model. The daily mean levels of PM10 and PM2.5 were 78 microg/m3 and 56 microg/m3, respectively. For every 10 microg/m3 increase in PM10 and PM2.5 levels, there was an estimated PEFR change of -0.39 l/min (95% CI, -0.63, -0.14) and -0.54 l/min (95% CI, -0.89, -0.19), respectively. These data also suggest that fine particles have a more adverse respiratory health impact for sensitive individuals such as the elderly and that more research and control strategies should focus on the smaller particles associated with air pollution.     

Quality and safety of a new rapeseed ‘Kangyu’ cultivated at different regions in Korea

The quality and safety of rapeseed are greatly affected by glucosinolate and erucic acid. To determine the quality of a new variety, ‘Kangyu’ was cultivated at 3 different regions and analyzed to evaluate oil quality and glucosinolates contents. The new cultivar accumulated 38–43%(w/w) of oil and 5–14 μmol/g of glucosinolates, whereas the local race contained 43% and 52 μmol/g, respectively. The total glucosinolates in ‘Sunmang’ was above the permissible limit. All ‘Kangyu’ samples had safe fatty acid compositions but the local race contained 43% of erucic acid (C22:1) that is far from the International Standard. The contents of oleic (C18:1), linoleic (C18:2), and linolenic acid (C18:3) in ‘Kangyu’ were 61–65, 21–23, and 9–10%, respectively. Consequently, ‘Kangyu’ was good oil source in Korea in terms of erucic acid (C22:1) and total glucosinolates for human health.     

Global regulation of a class of nonlinear systems with high-order triangular type nonlinearity

The problem of global regulation is investigated for a class of nonlinear systems which contain some high-order terms. We propose a high-order scaling state-feedback controller with appropriate dynamic gains. Compared to existing results, the condition on the nonlinearity is flexible due to the freedom of choosing the bounding positive function of the nonlinearity. Thus, the nonlinear systems with some high-order nonlinearities which do not belong to existing conditions can be globally regulated.     

Comparison of the Crystallization Behavior of Silica Between Mg- and Al-Phosphate Used in Tension Coatings of Grain-Oriented Electrical Steel

Metals and Materials International - The effect of the phosphate component on the thermal stability of tension coatings was investigated with a focus on the crystallization behavior of amorphous...