排序方式: 共有30条查询结果,搜索用时 15 毫秒
1.
The content and kind of trace elements in magnesium alloys have important effects on their ascast and semi-solid microstructures. In this research work, effects of trace Cr on as-cast and semi-solid microstructures of ZC61 magnesium alloy were investigated by metal mold casting and semi-solid isothermal heat treatment. The results show that the addition of Cr can refine the α-Mg phase without generating a new phase, noticeably change the eutectic phase, and decrease the average size of solid particles at the same isothermal heat treatment conditions. Non-dendritic microstructures of all alloys are constituted of α_1-Mg phases, α_2-Mg phases and eutectic phases after water quenching. With isothermal temperature increased or holding time prolonged, the eutectic microstructure(α-Mg+MgZn_2+CuMgZn) at the grain boundaries in as-cast alloy is melted preferentially and then turned into semi-solid non-dendritic microstructure by processes of initial coarsening, microstructure separation, spheroidizing and final coarsening. Especially when the ZC61-0.1 Cr alloy was treated at 585 ℃ for 30 min, the ideal non-dendritic microstructure can be obtained, and the corresponding solid particle size and shape factor were 37.5 μm and 1.33, respectively. The coarsening process of solid α-Mg phase at higher temperature or longer time, which is affected by both combining growth and Ostwald ripening mechanism, is refrained when Cr is added to the ZC61 alloy. 相似文献
2.
3.
4.
以内蒙古清水河地区高岭石为原料,利用X射线衍射(X-ray diffraction,XRD),傅里叶红外光谱(Fourier transform infrared spectroscopy,FT-IR),拉曼光谱(Raman spectroscopy),扫描电子显微镜(Scanning electron microscope,SEM)和热重-差热(TG-DTG)对不同粒度高岭石的晶体结构参数、微观形貌和热演化行为进行了研究.结果 表明:随着高岭石颗粒粒度的减小,高岭石的结晶度指数(HI)降低,晶体缺陷敏感度(R2)增加,高岭石样品从有序形态逐渐演化为无序形态,晶体结构的缺陷增加;在红外光谱和拉曼光谱中,3670.0 cm-1吸收峰的强度逐渐增强,而938.3 cm-1和913.6 cm-1Al-OH的弯曲振动峰强度逐渐减弱,显示高岭石的结构缺陷程度增大;微观形貌显示高岭石的片层结构随着颗粒粒度的降低逐渐松散,片层间显示出边缘面或边缘-边缘的接触;随着颗粒粒径的减小,比表面积增大,单位时间内能量的传递速率提高,使得高岭石的脱羟基失重呈现增加的趋势,同时,最大失重速率温度逐渐降低. 相似文献
5.
6.
机械臂在生产线上抓取组装完成的离合器后,需要准确地将离合器放置在自动导引车(AGV)的下料位置.针对AGV入库时位置不确定,机械臂无法准确实现下料问题,设计了一种基于机器视觉技术的离合器下料定位系统,并针对AGV尺寸较大、单相机定位存在精度差、定位不稳定的重要问题,采用双目定位提高精度和稳定性.实际使用结果表明:基于VisionPro视觉软件设计的AGV特征识别视觉定位系统具有很好的定位结果,定位精度为±0.5 mm,运行时间小于2 s;能够引导机械臂快速、准确地完成离合器下料任务,满足工业实际应用的需求. 相似文献
7.
低速离心法测定荧光红GG脂质体包封率 总被引:2,自引:0,他引:2
用薄膜分散法制取荧光红GG脂质体,紫外分光光度计520 am处测其吸光度,计算总浓度.取荧光红GG脂质体,3 000 r/min,离心10 min,分离含药脂质体和游离的药物,稀释后测定其上清和沉淀吸光度,计算其浓度.由包封率=(总浓度-沉淀浓度)/总浓度×100%计算包封率.结果发现溶液的稳定性和精密度都良好,测得脂质体中药物的包封率分别为11.89%,11.46%,12.89%,结果较为接近,说明低速离心法是一种有效的水不溶性药物脂质体包封率的测定方法. 相似文献
8.
以一种S形的五轴数控机床检验试件为对象,研究一套实用的型面误差处理、分析和显示技术,对型面进行重构,将型面上的微小误差进行夸大,以便可视化表达.根据理论型面的点云数据,采用线性插值的方法对S试件的理论表面轮廓进行重构,并将三坐标测量仪的法向误差数据加入到重构后的模型中,运用数学分析软件Matlab对误差数据进行处理,采用灰度显示和等高线的方法给出误差的两种显示结果.通过检验试件的误差可视化,得到了直观的误差分布,对快速评判检验试件型面质量,指导机床调整维修具有良好效果. 相似文献
9.
锂离子电池作为一种电源应用很广泛,但是在应用中存在一些不足,选取电化学性能良好的正负极材料是提高和改善锂离子电池电化学性能最重要的因素。从新型碳材料、硅基负极材料、锡基负极材料三方面介绍了目前锂离子电池的研究状况,并展望了锂离子电池负极材料的发展趋势。 相似文献
10.