Flashover voltage characteristics of contaminated station insulators under temporary ac overvoltages in the ac system connected with a frequency converter station

According to the recent analysis results of temporary ac overvoltage in the ac system connected with a frequency converter station, large-magnitude over-voltages were confirmed to occur under some special system conditions. Most of the station insulators currently used cannot withstand such overvoltages according to an evaluation based on the data obtained earlier. The necessity of tests to be done to evaluate such performance more accurately was recognized. Both power frequency and switching impulse overvoltage flashover tests were made on contaminated insulators by the method well simulating the natural wetting condition. Switching impulse flashover voltage with the waveshape having a long wavefront time of 2 ms can be well correlated with the flashover voltage characteristics of temporary ac overvoltage. Higher flashover voltage characteristics were obtained by a clean fog test method compared with those obtained by equivalent fog test method.     

Calciothermic reduction of titanium oxide in molten CaCl<Subscript>2</Subscript>

Titanium oxides were reduced to metallic titanium using the liquid calcium floating on the molten CaCl₂. A part of Ca dissolved into CaCl₂ and reacted with TiO₂ settled below CaCl₂. The by-product CaO also dissolved by about 20 mol pct into CaCl₂, which was effective in reducing the oxygen concentration in the obtained Ti particles. The compositional region in the Ca-CaCl₂-CaO system was examined for the less oxygen contamination in Ti and the better handling in leaching. A large amount of the residual calcium oxidized the titanium powder in leaching. The metallic Ti powder less than 1000 mass ppm oxygen could be obtained only for 3.6 ks using 5 to 7 mol pct Ca-CaCl₂ at 1173 K. The powder was slightly sintered like sponge, and contained approximately 1500 ppm Ca. The anatase phae, the intermediate product in the refining process of TiO₂, could be also supplied as raw material as well as rutile.     

The use of phase diagrams and thermodynamic databases for electronic materials

Phase diagrams and a thermodynamic database constructed by the Calculation of Phase Diagrams approach offer powerful tools for alloy design and materials development. This article presents recent progress on the thermodynamic database for microsolders and copper-based alloys, which is useful for the development of lead-free solders and prediction of interfacial phenomena between solders and the copper substrate in electronic packaging technology. In addition, examples of phase diagram applications are presented to facilitate the development of Co-Cr-based magnetic recording media in hard disks and new ferromagnetic shape-memory alloys. For more information, contact K. Ishida, Tohoku University, Department of Materials Science, Graduate School of Engineering, Aoba-yama 02, Sendai 980-8579, Japan.     

Wide gamut LCD using locally dimmable four‐primary‐color LED backlight

This paper proposes a wide gamut LCD using locally dimmable four‐primary‐color (4PC) LED backlight. Although the color gamut of LCDs has been improved in recent years, it is insufficient to reproduce all the colors in the real world. The objective of this paper is to propose a wide gamut LCD that reproduces all the colors in the real world while keeping the cost increases to a minimum. We evaluated the color gamut reproduced by LEDs of multiple primary colors and selected cyan as the optimal color to be added to the three primary colors to reproduce all the colors in the real world. Therefore, we designed an LED backlight consisting of an additional only‐cyan LED with three‐primary‐color LEDs and developed a prototype LCD with 4PC LED backlight. Furthermore, we developed a local dimming algorithm for the 4PC LED backlight. As a result, we confirmed that the prototype LCD with the 4PC LED backlight is able to cover almost all the colors in the real world and also able to display natural images with highly saturated colors by local dimming.     

Proposal of variable sequential sampling plan having desired operating characteristics indexed by quality loss

The proportion of non-conforming items has been traditionally utilised as an evaluation criterion for quality of items. However, the proportion of non-conforming items is not necessarily useful as a proper evaluation criterion for controlling high-quality manufacturing in recent years. Accordingly, in order to achieve further quality improvement and innovation, more careful quality evaluation has been required newly. Then, a concept of quality loss in the Taguchi methods has been devised as a severe criterion of quality evaluation. Hereby, a variable single sampling plan having desired operating characteristics (OCs) indexed by quality loss has been proposed in the area of statistical quality control. By the way, the most economical sampling inspection in the average sample number (ASN) is the sequential sampling plan based on the Wald’s sequential probability ratio test. Then, from the viewpoint of cost reduction, we discuss a variable sequential sampling plan having desired OC indexed by quality loss with the aim of expansion of the utility of variable sampling plan for quality loss. As the result, the design procedure of the sequential sampling plan for satisfying some required design conditions indexed by quality loss is provided. In addition, the effectiveness of the proposed sequential sampling plan is verified through some numerical examples.     

Minimizing False Positives of a Decision Tree Classifier for Intrusion Detection on the Internet

Machine learning or data mining technologies are often used in network intrusion detection systems. An intrusion detection system based on machine learning utilizes a classifier to infer the current state from the observed traffic attributes. The problem with learning-based intrusion detection is that it leads to false positives and so incurs unnecessary additional operation costs. This paper investigates a method to decrease the false positives generated by an intrusion detection system that employs a decision tree as its classifier. The paper first points out that the information-gain criterion used in previous studies to select the attributes in the tree-constructing algorithm is not effective in achieving low false positive rates. Instead of the information-gain criterion, this paper proposes a new function that evaluates the goodness of an attribute by considering the significance of error types. The proposed function can successfully choose an attribute that suppresses false positives from the given attribute set and the effectiveness of using it is confirmed experimentally. This paper also examines the more trivial leaf rewriting approach to benchmark the proposed method. The comparison shows that the proposed attribute evaluation function yields better solutions than the leaf rewriting approach.

Socializing artifacts as a half mirror of the mind

In the near future, our life will normally be surrounded with fairly complicated artifacts, enabled by the autonomous robot and brain–machine interface technologies. In this paper, we argue that what we call the responsibility flaw problem and the inappropriate use problem need to be overcome in order for us to benefit from complicated artifacts. In order to solve these problems, we propose an approach to endowing artifacts with an ability of socially communicating with other agents based on the artifact-as-a-half-mirror metaphor. The idea is to have future artifacts behave according to the hybrid intention composed of the owner’s intention and the social rules. We outline the approach and discuss its feasibility together with preliminary work.

---

Experimental investigation and thermodynamic calculation of the phase equilibria in the Cu-Sn and Cu-Sn-Mn systems

The phase equilibria in the Cu-rich portion of the Cu-Sn binary and Cu-Sn-Mn ternary systems have been determined using the diffusion-couple method, differential scanning calorimetry (DSC), high-temperature electron diffraction (HTED), and high-temperature X-ray diffraction (HTXRD) techniques. The present experimental results on the binary Cu-Sn system show the presence of the two-stage, second-order reaction A2 → B2 → D0₃ in the bcc-phase region, rather than a two-phase equilibrium between the disordered bcc (A2) and the ordered bcc (D0₃) phases, as reported before. Phase equilibria in the Cu-Sn-Mn ternary system in the composition range of 0 to 30 at. pct Sn and 0 to 30 at. pct Mn at 550 °C, 600 °C, 650 °C, and 700 °C have been determined, and a ternary compound (Cu₄MnSn) with a very small solubility has been detected. A thermodynamic analysis of the Cu-Sn-Mn ternary system including the Cu-Sn and Mn-Sn binary systems has also been carried out by the CALPHAD (Calculation of Phase Diagrams) method, in which the Gibbs energy of the bcc phase is described by the two-sublattice model in order to take into account the second-order A2/B2 ordering reaction. A consistent set of optimized thermodynamic parameters for the Cu-Sn-Mn system for describing the Gibbs energy of each phase results in a better fit between calculation and experiment.     

Fe-Ni-Si基奥氏体时效合金的马氏体相变和形状记忆效应

It is well known that the morphologies of the α martensite formed from the γ phase in ferrous alloys are classified into five types of lath, butterfly, (225)A type plate,lenticular and thin-plate. Among those α martensites, onlythe thinplate martensite, which is characterized by containing a high density of transformation twins, has a potential of exhibiting a perfect shape memory (SM) effect.Recently the present authors found in Fe-Ni-Si alloys that the thin-plate martensite is formed by the introduction of fine and coherent γ-(Ni,Fe)3Si particles with a L12 ordered structure in the austenite matrix due to ausaging. In the present study, the SM properties of the ausaged Fe-Ni-Si alloys with the thin-plate martensite are investigated by a conventional bending-test. The effects of the addition of Co to the Fe-Ni-Si alloys on the martensitic transformation and the SM properties are also investigated. It is shown that while the ausaged Fe-Ni-Si ternary alloys exhibit an imperfect SM effect due to reverse transformation from stress-induced thin-plate martensite to austenite, the SM properties are improved by the addition of Co. An almost perfect SM effect is confirmed in the Fe-Ni-Si-Co alloys by heating to 1 100 ℃ after deformation at -196 ℃.