Microstructure-Property Correlation in AI_4C_3 Dispersion Strengthened Al Composite

The microstructure and tensile properties of Al_4C_3 dispersion strengthened Al composite fabricatedby reaction milling technique were investigated.It is indicated that the rod-like Al_4C_3 dispersoidshaving a diameter of 0.02-0.03 μm and a length of 0.1-0.3μm are formed by reaction of C with Al,and uniformly distributed in the Al matrix.The interface between Al_4C_3 and Al is clean and theinterfacial bonding is good.The matrix consists of the subgrains which have the size of 0.3-0.4μm,and most of the Al_4C_3 dispersoids are distributed on the subgrain boundaries.The 11 vol.-%Al_4C_3/Al composite exhibits an UTS (ultimate tensile strength) of 400 MPa and anelongation-to-failure of 8.0%.     

Study on Hot Deformation Cracks of Steel D2 Using Procesing Map

ＳｔｕｄｙｏｎＨｏｔＤｅｆｏｒｍａｔｉｏｎＣｒａｃｋｓｏｆＳｔｅｅｌＤ２ＵｓｉｎｇＰｒｏｃｅｓｉｎｇＭａｐＧａｏＳｈａｎ，ＬｉｕＸｉａｎｇｈｕａ，ＷａｎｇＧｕｏｄｏｎｇＡＢＳＴＲＡＣＴＴｈｅｈｏｔｄｅｆｏｒｍａｔｉｏｎｂｅｈａｖｉｏｒｓｏｆｓｔｅｅｌ...     

氯离子导体及其应用开发

本文围绕有希望实现实用化的PbCl_2基氯离子导体,着重从材料研制、应用探索及应用前景这三个方面概述了氯离子导体研究的状况和今后动向。     

Microstructure and Its Influence on Mechanical Behaviour of Directionally Solidified DZ38G Superalloy

The features of microstructure and theirinfluence on mechanical properties onstress-rupture as well as thermal fatigue ofdirectionally solidified DZ38G nickel-base su-peralloy have been investigated.It has beenfound that the contents of carbides on grainboundaries are increased and morphology of γ'-precipitates has been changed after testing.Particularly γ'-precipitates coalesced intoraft-like in morphology perpendicular to theapplied stress-axis have been observed thathas no detrimental effect on the stress-rupturebehaviour.The tendency of σ-formation hasalso been discussed.The σ-phase can be avoidedwhen the process parameters are chosenappropriately during solidification.     

Investigation of electrode and hydrogen induced crack in welded joint of dissimilar steel

The welded joint of dissimilar heat-resisting steels 20Crl2MoV(F12)and 12 Cr2MoWVTiB(102)generally works around 600°C.In this paperthree kinds of ferritic electrodes are used for testing.They are R817 high-strength electrode(CrllMoVNi),R347 low-strength electrode(Cr2MoVWB)and newly-developed R507MoNb medium-strength electrode.The study on theinfluence of those three different electrodes on carbon migration,HIC and hy-drogen diffusion shows that medium-strength electrodes can well control thecarbon migration,and that the tendency to HIC in the joint formed by R817 issmaller than that by R347 instead.Considering the effect of weld metal transfor-mation on the restraint stress and hydrogen concentration of a joint,the hydro-gen distribution in the heat-affected zone(HAZ)is calculated by using finite ele-ment method(FEM)with stress and strain changing,and so the effect of thetransformation behaviour on HIC is revealed.In addition,newly-developedR507MoNb electrodes,tested the elevated-temperature property,oxidation re-sistance and creep rupture strength,have fulfilled the technical standards con-cerned and passed the examination of on-the-spot operation.     

Role of Pits in Corrosion Fatigue of Offshore Structural Steel

From the corrosion fatigue test under intermit-tent wetting condition for offshore structural steelof A537 cl.l and data analysis,some results associ-ated with the role of pits in fatigue process havebeen discussed.     

不可追踪电子货币的实现

电子货币技术的实现是电子商务领域研究的重要课题之一,而不可追踪的电子货币的实现则是能否使电子商务普及的重要因素之一。即如何解决电子货币的匿名性和其它特性同时实现的矛盾。本文分析了理想的不可追踪的电子货币应具备的特点,运行模式及安全方案。给出了现阶段较完善的电子货币实现方案——基于RSA盲数字签名方案设计的一个在线电子货币方案和Brands系统。     

铸造镍基高温合金的蠕变阻力

在对颗粒强化理论和位错蠕变理论进行回顾、评价基础上，发展了一个位错蠕变阻力模型，认为蠕变阻力是影响铸造镍基高温合金蠕变机制的重要因素。当施加应力足以使位错切入γ′相时，主要蠕变机制是位错切割γ′相过程，蠕变阻力就是位错切入γ′相的临界门槛应力。在低施加应力区，位错只能借助于热激活攀移过程通过γ′相。蠕变阻力包括两部分：第一项是位错攀移临界门槛应力，与施加应力无关；第二项是与施加应力有关的阻力项，代表了其他强化机制的贡献。位错攀移机制蠕变阻力的上限是切割机制门槛应力。在3种铸造镍基高温合金中（定向凝固DZ17G合金，IN100合金和IN738合金），对上述模型进行了验证，理论计算应用了SL强化理论，与实测值符合较好。     

矿岩粉碎全过程能耗-粒度关系的连续损伤理论研究SCIEI

本文从连续损伤理论的观点出发,将矿岩粉碎过程描述为在外部荷载作用下矿岩颗粒内部微缺陷(损伤)演化和繁衍的过程。导出了粉碎能耗与产品粒度分布的理论表达式。该式包含了所有传统的理论,同时较传统的能量分配观点前进了一步。