Augmented reality in education: a meta-review and cross-media analysis

Augmented reality (AR) is an educational medium increasingly accessible to young users such as elementary school and high school students. Although previous research has shown that AR systems have the potential to improve student learning, the educational community remains unclear regarding the educational usefulness of AR and regarding contexts in which this technology is more effective than other educational mediums. This paper addresses these topics by analyzing 26 publications that have previously compared student learning in AR versus non-AR applications. It identifies a list of positive and negative impacts of AR experiences on student learning and highlights factors that are potentially underlying these effects. This set of factors is argued to cause differences in educational effectiveness between AR and other media. Furthermore, based on the analysis, the paper presents a heuristic questionnaire generated for judging the educational potential of AR experiences.     

Robustness assessment via stability radii in delay parameters

This paper focuses on the robust stability analysis of a class of linear systems including multiple delays subjected to constant or time‐varying perturbations. The approach considered makes use of appropriate stability radius concepts (dynamic, static) and relies on a feedback interconnection interpretation of the uncertain system. Various computable bounds on stability radii are obtained that exploit the structure of the problem. Systems including perturbations on both system matrices and delays are also dealt with. Copyright © 2008 John Wiley & Sons, Ltd.     

Corrosion behaviour in physiological fluids of surface films formed on titanium alloys

The properties of the surface films formed on Ti and its Ti–5Al–4V and Ti–6Al–3.5Fe alloys by chemical (immersion in 10 M NaOH) and thermal treatment (500 °C) were studied in this paper. Their corrosion behaviour in Ringer solution was investigated. After treatments, the sample microhardness was measured. Also, the sample surfaces were observed by an optical microscope before and after immersion in Ringer solutions. The electrochemical behaviour of the surface films obtained by the chemical and thermal treatments was studied using the methods of the electrochemical impedance spectroscopy (EIS) and monitoring of open circuit potentials at different immersion periods (up to 60 days) in Ringer solution. Microhardness increased with the increasing loads for the studied materials, showing the existence of a compact protective layer. Microscopic observations exhibited more compact coatings after 60 days of exposure in Ringer solution, due to the formation of an apatite layer. EIS spectra revealed surface films with two layers: an inner, barrier protective layer and an outer, porous apatite layer. The impedance increases in time denoting that the films have grown by apatite nucleation. Also, EIS spectra showed that the complex treatment by chemical + heat method is the most efficiently. For the samples treated by the two processes (chemical + heat) the values of the open circuit potentials are nobler than of the chemical treated samples, denoting better protective, bioactive films.     

Experiences in building a Grid-based platform to serve Earth observation training activities

Earth observation data processing and storing can be done nowadays only using distributed systems. Experiments dealing with a large amount of data are possible within the timeframe of a lesson and can give trainees the freedom to innovate. Following these trends and ideas, we have built a proof-of-the-concept platform, named GiSHEO, for Earth observation educational tasks. It uses Grid computing technologies to analyze and store remote sensing data, and combines them with eLearning facilities. This paper provides an overview of the GiSHEO's platform architecture and of its technical and innovative solutions.     

Cast Iron Inoculation Enhanced by Supplementary Oxy-sulfides Forming Elements

Inoculation is one of the most important metallurgical treatments applied to the molten cast iron immediately prior to casting, to promote solidification without excessive eutectic undercooling, which favors carbides formation usually with undesirable graphite morphologies. The paper focused on the separate addition of an inoculant enhancer alloy [S, O, oxy-sulfides forming elements] with a conventional Ca-FeSi alloy, in the production of gray and ductile cast irons. Carbides formation tendency decreased with improved graphite characteristics as an effect of the [Ca-FeSi + Enhancer] inoculation combination, when compared to other Ca/Ca, Ba/Ca, RE-FeSi alloy treatments. Adding an inoculant enhancer greatly enhances inoculation, lowers inoculant consumption up to 50% or more and avoids the need to use more costly inoculants, such as a rare earth bearing alloy. The Inoculation Specific Factor [ISF] was developed as a means to more realistically measure inoculant treatment efficiency. It compares the ratio between the improved characteristic level and total inoculant consumption for this effect. Addition of any of the commercial inoculants plus the inoculant enhancer offered outstanding inoculation power [increased ISF] even at higher solidification cooling rates, even though the total enhancer addition was at a small fraction of the amount of commercial inoculant used.     

BiFeO3 films on steel substrate by the citrate method

We deposited BiFeO₃ films on stainless steel substrates using a simple low-temperature wet-chemical route. Bismuth and iron nitrates were used as metal source and citric acid as chelating agent to prepare a water solution and deposit the film by dipping the steel substrate in the viscous solution. We have investigated the composition, crystallinity and structure of the BiFeO₃ film on steel by X-ray diffraction, X-ray photoelectron spectroscopy, high resolution scanning electron microscopy, conventional and high resolution transmission electron microscopy, and energy dispersive spectroscopy techniques. The film deposited on the steel substrate has two sublayers: a very thin (about 100 nm) nanocrystalline layer, with crystallite size of few nanometers, and a thicker (below 1 μm) crystalline layer.     

Benefits of Residual Aluminum in Ductile Iron

Two main chemistry systems of micro-inclusions can be identified in ductile iron: Ca-S-X and Mg-Si-O-X with the majority of the inclusions regardless of treatment type and location being of the second type, silicates. Laboratory investigations have shown that simple silicates were present in the matrix, while more complex silicates were present in conjunction with graphite, probably acting as graphite nucleation sites. In these more complex silicates, elevated levels of Al, Ca, Ce and La were typical. Comparing micro-particles embedded in iron matrix and graphite nodules of iron treated with pure Mg-metal and iron treated with MgFeSi alloy showed a higher amount of complex silicates with elevated Al-levels in the iron treated with MgFeSi. Further laboratory investigation was undertaken to explore which source of Al and which range of residual Al would have a favorable impact on the graphite nucleation in ductile iron. The work showed that a residual aluminum of 0.005 to 0.020 wt.% appears to be beneficial for improving ductile iron solidification characteristics without the incidence of pinholes. Greatest benefits were achieved when introducing the Al into the iron via an inoculant late during processing or via a pre-conditioner to the base iron. Al added via the MgFeSi provided less benefit. Some case studies illustrating the effect of Al in ductile iron are also presented, as Al-containing pre-conditioner or/and Al-bearing, FeSi inoculant application.