A 3.3-V single power supply 16-Mb nonvolatile virtual DRAM using aNAND flash memory technology

A 3.3-V 16-Mb nonvolatile memory having operation virtually identical to DRAM with package pin compatibility has been developed. Read and write operations are fully DRAM compatible except for a longer RAS precharge time after write. Fast random access time of 63 ns with the NAND flash memory cell is achieved by using a hierarchical row decoder scheme and a unique folded bit-line architecture which also allows bit-by-bit program verify and inhibit operation. Fast page mode with a column address access time of 21 ns is achieved by sensing and latching 4 k cells simultaneously. To allow byte alterability, nonvolatile restore operation with self-contained erase is developed. Self-contained erase is word-line based, and increased cell disturb due to the word-line based erase is relaxed by adding a boosted bit-line scheme to a conventional self-boosting technique. The device is fabricated in a 0.5-μm triple-well, p-substrate CMOS process using two-metal and three-poly interconnect layers. A resulting die size is 86.6 mm², and the effective cell size including the overhead of string select transistors is 2.0 μm²     

Infiltration behaviour of an internal electrode and electrical properties of multilayer capacitors by electrode infiltration

The infiltration behaviour of a tin melt, as an internal electrode, to the porous layers, and the electrical properties of multilayer ceramic capacitors was investigated by electrode infiltration. By preventing green-state delamination between the dielectric green sheet and the carbon paste, uniform porous layers, 5 m thick, could be formed after sintering. When 15 vol % ceramic pillars were added to the carbon paste, the porous layer of the sintered samples could be considered as a porous solid formed by many pores larger than 4 m. The critical pressure for the infiltration of tin melt into such a porous layer was found to be 0.5 MPa. With a high infiltration pressure, the resistivity of multilayer capacitors was decreased to 10⁸–10⁹cm due to the growth of micro-defects formed on the surface of the dielectric layers during the lamination process.     

Shear strength and aging characteristics of 63Sn−37Pb solder bumps with various solder ball and pad sizes

The shear strength and aging characteristics of 63Sn–37Pb solder bumps were characterized with variation in solder ball and UBM pad sizes. The shear strength increased with shorter effective crack size,a _effs which was determined with the solder ball and pad sizes. The shear strength of the solder bumps on Au/Ni/Cu and Ni/Cu did not change significantly with reflow time. Substantial decrease in the shear strength occurred for the solder bumps formed on Au/Ni/Cu with aging treatment, and the shear strength after aging was also related to the bump shape which was determined with the solder ball and pad sizes.     

SAR-derived wind fields at the coastal region in the East/Japan Sea and relation to coastal upwelling

The relationship between the modification of synthetic aperture radar (SAR) wind field and coastal upwelling was investigated using high-resolution wind fields from Advanced Land Observing Satellite (ALOS) Phased Array type L-band synthetic aperture radar (PALSAR) imagery and sea-surface temperature (SST) from National Oceanic and Atmospheric Administration/Advanced Very-High-Resolution Radiometer (NOAA/AVHRR) data. The retrieved SAR wind speeds seem to agree well with in situ buoy measurements with only a relatively small error of 0.7 m s^?1. The SAR wind fields retrieved from the east coast of Korea in August 2007 revealed a spatial distinction between near and offshore regions. Low wind speeds of less than 3 m s^?1 were associated with cold water regions with dominant coastal upwelling. Time series of in situ measurements of both wind speed and water temperature indicated that the upwelling was induced by the wind field. The low wind field from SAR was mainly induced by changes in atmospheric stability due to air–sea temperature differences. In addition, wind speed magnitude showed a positive correlation with the difference between SST and air temperature (R² = 0.63). The dependence of viscosity of water on radar backscattering at the present upwelling region was negligible since SAR data showed a relatively large backscattering attenuation to an SST ratio of 1.2 dB °C^?1. This study also addressed the important role of coastal upwelling on biological bloom under oligotrophic environments during summer.     

Curve interpolation with variable feedrate for surface requirement

Finish machining of a curved surface is often carried out by an NC system with curve interpolation in the field. This function, called a NURBS interpolation, adopts a feedrate optimizing strategy based on both the geometrical information of the curved path and dynamic properties such as the curvature of the curve, the allowable acceleration and the time constant. However, in the case of a finish cut using a ball-end mill, the curve interpolator needs to take the machining process into account for improved surface roughness, while reducing the polishing time. This surface roughness on high-speed machining is theoretically defined by the feed per tooth and the pickfeed at the given radius of the tool. In this study, the effect of low machinability at the bottom of a tool on surface roughness is also considered. A curve interpolation algorithm is proposed for generating particular feedrate commands that are able to control the roughness of a curved surface. The simulation of the machined surface by the proposed algorithm was carried out, and experimental results are presented. A feedrate scheme that depends on the inclination angle has important potential application in part finishes consistent with prescribed surface roughness. The results show that the proposed algorithm is potentially useful for roughness-controlled machining of curved surface products.     

A performance evaluation of information security training in public sector

Recently, as the incidents of the security breach and the personal information leakage in public institutions and the major information/communication infrastructure have increased, the importance of the development and training of human resources specialized in cybersecurity, who can immediately respond to this are emphasized. Accordingly, the government has announced policies for the development of human resources, established and operated public sector cybersecurity training centers; however, there is no method for understanding the investment performance and effect of the present cybersecurity education/training in the public sector. For the establishment of a training system and the quality control of continuing education, a method for evaluating the performance of the training is needed, and this can prove the justification of the promotion of the training program and the sustainability of the training center. The goal of this study is to analyze the outcome of education and training in the field of information security and economic return on investment. For this purpose, through literature research on the outcome of the domestic and overseas education and training, this study drew a model that can apply.     

The electrochemical behavior of an enzyme biosensor electrode using an oxyfluorinated pitch-based carbon

A glucose sensor electrode was prepared by thermally treating a pitch-based carbon material. Oxyfluorination was used to modify the surface of the prepared carbon to induce the formation of hydrophilic functional groups. A glucose oxidase enzyme was effectively loaded onto the surface of the oxyfluorinated carbon and was more sensitive in glucose sensing because of the effects of the improved interfacial affinity between the electrode and the glucose oxidase. The introduced hydrophilic functional groups were examined using XPS analysis. In current–voltage measurements, a higher current was observed in the samples prepared with a higher oxygen content. In addition, a clear redox peak was observed in the surface modified samples. These results can be attributed to efficient electrical resistance measurement by easy electron transfer during glucose sensing. An efficient glucose sensor electrode was prepared using pitch-based carbon, which has beneficial electrical properties, and oxyfluorination, which improves the surface interface.     

Physicochemical properties of CWJ-a-5, a new antitumor 3-arylisoquinoline derivative

The compound CWJ-a-5 [1-(4-methylpiperazinyl)-3-phenylisoquinoline hydrochloride] is a novel 3-arylisoquinoline derivative which has exhibited potent antitumor activity. As part of an effort to develop a useful formulation for clinical evaluation of this compound, the aqueous stability of CWJ-a-5 as a function of pH, ionic strength, and temperature, as well as its various physicochemical properties, have been examined. The pKa value obtained by potentiometric titration in methanol-water mixtures was 3.61, at 25 degrees C. The aqueous solubility and the apparent partition coefficient of CWJ-a-5 over the pH range 2.08-9.88 were consistent with those expected of a weak acid of similar pKa value. The degradation of CWJ-a-5 was found to follow apparent first-order kinetics. The pH-rate profiles generated at 80 degrees C were accounted for by acid-catalyzed degradation at low pH and base-catalyzed degradation at high pH. The activation energy was determined as 22.12 kcal/mol for the degradation of CWJ-a-5 in a pH 2.92 solution with a constant ionic strength of 0.2. Increasing the ionic strength up to 0.9 led to a higher degradation rate constant at pH 2.92. However, CWJ-a-5 was very stable even in a pH 2.92 solution, and its shelf-life was calculated to be 2.03 years at 25 degrees C from the Arrhenius plot.     

A low-jitter mixed-mode DLL for high-speed DRAM applications

This paper presents a salient clock deskewing method with a mixed-mode delay-locked loop (MDLL) for high-speed synchronous DRAM applications. The presented method not only solves the resolution problem of conventional digital deskewing circuits, but also improves the jitter performance to the level of well-designed analog deskewing circuits, while keeping the power consumption and locking speed of digital deskewing circuits. The whole deskewing circuit is fabricated in a 3.3-V 0.6-μm triple-metal CMOS process and occupies a die area of 0.45 mm². Measured rms jitter is 6.38 ps. The power consumption of the entire chip, including I/O peripherals, is 33 mW at 200 MHz with a 3.3-V supply     

Thermal fluorination effects on carbon nanotubes for preparation of a high-performance gas sensor

A high-performance NO gas sensor was prepared by inducing thermal fluorination of carbon nanotube semiconductors. Thermal fluorination of multi-walled carbon nanotubes (MWCNTs) was carried out at various temperatures (100 ∼ 1000 °C) to investigate the effects of the reaction temperature. The mechanism of high-performance NO gas sensor electrode was shown to depend on the fluorination temperature in a way that can be divided into three regions, separated at 400 and 1000 °C. In the first temperature region, the induction of fluorine functional groups onto MWCNTs showed the opposite trend in electrical resistance change comparing with traditional p-type MWCNTs. In the second temperature region, the induced fluorine functional groups were attenuated by generated fluorinated carbon gases resulting in the decomposition of MWCNTs and the recovery of traditional p-type gas sensor behavior. In the highest temperature region above 1000 °C, reoriented carbon structure was observed, showing bent nanotubes produced from destruction by fluorination and subsequent reorientation due to the high temperature. The gas sensing responsiveness was significantly improved by the thermal fluorination, which causes electrophilic attraction, creates adsorption sites for target NO gases and improve hydrophobicity for gas sensing stability in humid condition. In conclusion, a high-performance gas sensor was obtained by thermal-fluorination of MWCNTs.