Laws of Formation of Electrospark Coatings from Alloys of the Ni – Cr – Al – Y System

The main parameters of electrospark alloying of steel 45 with anodes made from Ni – Cr – Al – Y alloys have been investigated. The anodes were fabricated by casting and hot pressing. The highest values of the mass transfer coefficient were observed in the case of electrospark alloying with hot-pressed alloys. Microstructure and x-ray phase analyses of electrospark coatings revealed the presence of solid solutions based on nickel, iron, chromium as well as intermetallic compounds. Coatings obtained by electrospark alloying with hot-pressed alloy are more wear-resistant than are coatings obtained by alloying with cast alloys.     

Role of Chiral Configuration in the Photoinduced Interaction of D- and L-Tryptophan with Optical Isomers of Ketoprofen in Linked Systems

The study of the L- and D-amino acid properties in proteins and peptides has attracted considerable attention in recent years, as the replacement of even one L-amino acid by its D-analogue due to aging of the body is resulted in a number of pathological conditions, including Alzheimer’s and Parkinson’s diseases. A recent trend is using short model systems to study the peculiarities of proteins with D-amino acids. In this report, the comparison of the excited states quenching of L- and D-tryptophan (Trp) in a model donor–acceptor dyad with (R)- and (S)-ketoprofen (KP-Trp) was carried out by photochemically induced dynamic nuclear polarization (CIDNP) and fluorescence spectroscopy. Quenching of the Trp excited states, which occurs via two mechanisms: prevailing resonance energy transfer (RET) and electron transfer (ET), indeed demonstrates some peculiarities for all three studied configurations of the dyad: (R,S)-, (S,R)-, and (S,S)-. Thus, the ET efficiency is identical for (S,R)- and (R,S)-enantiomers, while RET differs by 1.6 times. For (S,S)-, the CIDNP coefficient is almost an order of magnitude greater than for (R,S)- and (S,R)-. To understand the source of this difference, hyperpolarization of (S,S)-and (R,S)- has been calculated using theory involving the electron dipole–dipole interaction in the secular equation.     

The influence of poly(3,4-ethylenedioxythiophene) modification on the transport properties and fuel cell performance of Nafion-117 membranes

Nafion-117/PEDOT composite membranes were synthesized by in situ chemical polymerization of 3,4-ethylenedioxythiophene (EDOT) using ammonium persulfate as an oxidant. The polymerization of EDOT in Nafion membranes for various EDOT/oxidant treatment sequences was studied for the first time. PEDOT introduction leads to a slight decrease in both the ion-exchange capacity and water uptake of the composite membranes, as well as to an increase in cationic transport. Membranes initially treated with an oxidant exhibit better conductivity and lower hydrogen permeability. The effect of both modification of Nafion-117 membranes by PEDOT and hot-pressing of hydrogen-oxygen membrane-electrode assemblies (MEAs) on the performance of proton-exchange membrane fuel cells was studied. The maximum power density of the fabricated MEAs increases 1.5-fold: from 510 (for a pristine Nafion-117 membrane) to 810 mW cm⁻² (for a membrane modified by PEDOT). The current density at a voltage of 0.4 V reaches 1248 and 2246 mA cm⁻², respectively.     

Solders development and application process for a micro chip-camera

Nowadays, micro components have to fulfill rising optical requirements for different scientific and industrial fields like astronomy, medicine or multimedia. For this purpose, advanced miniaturized chip-cameras are produced for the microsystems engineering market. The assembly and joining technologies play a very important role in the production of these micro components. Several challenges are associated with the joining of chip-cameras. In this study, the application of the soldering technology has been considered in order to face these challenges. Two joining technologies have been investigated: active soldering and transient liquid phase (TLP) bonding. Both soldering processes have shown a big potential for hybrid microsystems joining in previous studies. For both processes, soldering alloys and parameters have been conceived in order to fulfill the joining requirements of the micro camera components. For instance, the joining temperature represents a major challenge because the chip-camera consists of a plastic material, polymethyl methacrylate (PMMA). Therefore, particular attention has been directed to the soldering as well as to the coating temperature. The experimental investigations concerning the solders application through physical vapor deposition (PVD) have been supported by finite element method (FEM) simulations. The analysis of  the temperature distribution in the micro components during the coating process was the focus of  the calculations. Possible undesirable local overheated areas of the chip-camera components can be detected through simulation.

---

Urinary proteomic analysis of chronic allograft nephropathy

The pathogenesis of progressive renal allograft injury, which is termed chronic allograft nephropathy (CAN), remains obscure and is currently defined by histology. Prospective protocol-biopsy trials have demonstrated that clinical and standard laboratory tests are insufficiently sensitive indicators of the development and progression of CAN. The study aim was to determine if CAN could be characterized by urinary proteomic data and identify the proteins associated with disease. The urinary proteome of 75 renal transplant recipients and 20 healthy volunteers was analyzed using surface enhanced laser desorption and ionization MS. Patients could be classified into subgroups with normal histology and Banff CAN grades 2-3 with a sensitivity of 86% and a specificity of 92% by applying the classification algorithm Adaboost to urinary proteomic data. Several urinary proteins associated with advanced CAN were identified including α1-microglobulin, β2-microglobulin, prealbumin, and endorepellin, the antiangiogenic C-terminal fragment of perlecan. Increased urinary endorepellin was confirmed by ELISA and increased tissue expression of the endorepellin/perlecan ratio by immunofluoresence analysis of renal biopsies. In conclusion, analysis of urinary proteomic data has further characterized the more severe CAN grades and identified urinary endorepellin, as a potential biomarker of advanced CAN.     

Increasing the Resistance of Automobile Sheet to Atmospheric Corrosion by Optimizing its Chemical Composition and the Parameters of the Manufacturing Process

A method involving alternating immersion in a 3.5% NaCl solution has been developed for corrosion tests of automobile sheet. Results obtained from 30 cycles of tests (10 + 50 min) of specimens of steels 08Yu, 08ps, 08YuP, 08YuDP, 08GSYuT, and IF established the dependence of the steel's unit weight gain from corrosion products on its combined content of carbon and silicon: steels with a lower content of these elements show a smaller gain in weight, i.e., they exhibit greater corrosion resistance. Steel alloyed with copper (0.23–0.34%) and phosphorus (0.06–0.08%) – the production of which has been mastered by the company Severstal' — has the highest resistance to corrosion. Use of the method makes it possible to rank grades of automobile sheet in one of three corrosion-resistance classifications in relation to their chemical composition and the parameters of the production process. __________ Translated from Metallurg, No. 8, pp. 46–52, August, 2005.     

Some features of the formation of the surface microrelief of steel under ultrasonic finishing treatment

The surface microrelief of carbon steel after ultrasonic finishing treatment was studied using a Micro Measure 3D Station three-dimensional contactless profilometer. The effect of the parameters of the initial surface on the microrelief of the obtained surface was considered. Some features of the formation of a microrelief under the regimes of hardening and finishing hardening treatment were described. To remove rehardening traces on the surface layer, introduction of a geoactivating material into the zone of treatment was proposed.     

An Investigation of the Possibility of Extraction of Metals from Heavy Oil

Experimental and theoretical studies of physical influence on the distribution of heavy metals and viscosity of heavy oils are given in the article. The oil of Yaregskoye (Timan-Pechora province) oil field was used as the test material. Microinclusions of metals (V, Ni, Ti, Fe, etc.) in the mineral parts were detected using scanning electron microscopy and electron microprobe analysis. In an attempt to extract these metals, effects of the extractant type, extractant concentration, and ultrasonic treatment on the extraction process were evaluated.     

Structure and Properties of High-Temperature Multilayer Hybrid Material Based on Vanadium Alloy and Stainless Steel

The present work is devoted to the development of new structural composite material having the unique complex of properties for operating in ultrahard conditions that combine high temperatures, radiation, and aggressive environments. A new three-layer composite tube material based on vanadium alloy (V-4Ti-4Cr) protected by stainless steel (Fe-0.2C-13Cr) has been obtained by co-extrusion. Mechanism and kinetics of formation as well as structure, composition, and mechanical properties of “transition” area between vanadium alloy and stainless steel have been studied. The transition area (13- to 22-µm thick) of the diffusion interaction between vanadium alloy and steel was formed after co-extrusion. The microstructure in the transition area was rather complicated comprising different grain sizes in components, but having no defects or brittle phases. Tensile strength of the composite was an average 493 ± 22 MPa, and the elongation was 26 ± 3 pct. Annealing at 1073 K (800 °C) increased the thickness of transition area up to 1.2 times, homogenized microstructure, and slightly changed mechanical properties. Annealing at 1273 K (1000 °C) further increased the thickness of transition area and also lead to intensive grain growth in steel and sometimes to separation between composite components during tensile tests. Annealing at 1073 K (800 °C) is proposed as appropriate heat treatment after co-extrusion of composite providing balance between diffusion interaction thickness and microstructure and monolithic-like behavior of composite during tensile tests.