Weak Localization of Electrons on a Helium Surface

Weak localization by vapor-atom scattering is studied for electrons on a helium surface. Dephasing times are measured as a function of electron density. The electron-electron collision time is determined. The dephasing mechanism is due to the motion of helium atoms.     

Specific energy optimization in sawing of rocks using Taguchi approah简

This work aims at selecting optimal operating variables to obtain the minimum specific energy （SE） in sawing of rocks. A particular granite was sampled and sawn by a fully automated circular diamond sawblades. The peripheral speed, the traverse speed, the cut depth and the flow rate of cooling fluid were selected as the operating variables. Taguchi approach was adopted as a statistical design of experimental technique for optimization studies. The results were evaluated based on the analysis of variance and signal-to-noise ratio （S/N ratio）. Statistically significant operating variables and their percentage contribution to the process were also determined. Additionally, a statistical model was developed to demonstrate the relationship between SE and operating variables using regression analysis and the model was then verified. It was found that the optimal combination of operating variables for minimum SE is the peripheral speed of 25 m/s, the traverse speed of 70 cm/min, the cut depth of 2 cm and the flow rate of cooling fluid of 100 mL/s. The cut depth and traverse speed were statistically determined as the significant operating variables affecting the SE, respectively. Furthermore, the regression model results reveal that the predictive model has a high applicability for practical applications.     

Sources and mitigation of methane emissions by sectors: A critical review

The environmental community rightly recognizes global warming as one of the gravest threats to the planet. Methane (CH₄), one of the greenhouse gases causing global warming, is emitted from a variety of sources and its concentration in atmosphere has increased dramatically over the last few centuries. Therefore, the increasing concentrations of methane are of special concern because of its effects on climate and atmospheric chemistry. Anthropogenic sources of methane can be collected under the titles of agriculture, energy, waste and industry on the basis of sectors. This paper aims at examining the past trends in emissions, the sources and mitigation strategies of the methane. As a result of the study, it is determined that the agricultural sector is the biggest source of methane emissions among the sectors. The energy, waste and industry follow the agricultural sources respectively.     

Prioritization methodology of dangerous substances for water quality monitoring with scarce data

Monitoring and control of dangerous substances discharged into receiving waters have attracted more attention lately. Since it is not possible to analyze every single substance, a prioritization methodology is needed for the selection of those to be monitored. Existing well-developed models require significant amount of data for reliable outcomes. This paper presents a methodology to prioritize the dangerous substances having adverse effects on freshwaters in Turkey, where data are scarce. Such a methodology will also serve as a solid model for other countries with limited background data. The adopted methodology enabled the elimination of chemicals to generate a candidate list composed of 608 substances among more than 5000 substances. Further screening and prioritization were conducted using different assessment methods (i.e., Total Hazard Value, Total Impact Value, Combined Monitoring-based, and Modelling-based Priority Setting) to obtain a proposed Final Candidate Specific Pollutants List of 150 dangerous substances. The proposed Candidate National Pollutant List of Turkey was established by combining 45 priority pollutants of the European Union with a list of candidate specific pollutants. According to the outcomes of this study, monitoring and controlling of 195 dangerous substances in freshwaters are recommended. Further detailed studies should be conducted in order to observe the actual levels of these dangerous substances in freshwaters followed by a review of the monitoring list accordingly. Moreover, further revisions might be required in the proposed list due to some possible versatile conditions in terms of sampling points (i.e., change in the location of industries).     

Artificial neural network and regression models for performance prediction of abrasive waterjet in rock cutting

An experimental study is carried out for modeling the rock cutting performance of abrasive waterjet. Kerf angle (KA) is considered as a performance criteria and modeled using artificial neural network (ANN) and regression analysis based on operating variables. Three operating variables, including traverse speed, standoff distance, and abrasive mass flow rate, are studied for obtaining different results for the KA. Data belonging to the trials are used for construction of ANN and regression models. The developed models are then tested using a test data set which is not utilized during construction of models. Additionally, the regression model is validated using various statistical approaches. The results of regression analysis are also used to determine the significant operating variables affecting the KA. Furthermore, the performances of derived models are compared for showing the accuracy levels in prediction of the KA. As a result, it is concluded that both ANN and regression models can give adequate prediction for the KA with an acceptable accuracy level. The compared results reveal also that the corresponding ANN model is more reliable than the regression model. On the other hand, the standoff distance and traverse speed are statistically determined as dominant operating variables on the KA, respectively.     

A Preliminary Investigation of the ISG Glass Vapor Hydration

During the geological disposal of high-level waste, the nuclear glass is expected to be first hydrated in water vapor prior to liquid alteration. In the present work, we investigated the vapor hydration of the International simple glass (ISG) at 175°C and different relative humidities (60%, 80% and 98%). The glass hydration was investigated by nuclear reaction analysis (NRA) and Fourier transform infra-red spectroscopy. The chemical and mineralogical compositions of the alteration products were studied using scanning electron microscopy/energy dispersive X-ray spectroscopy (SEM-EDS) and μ-Raman spectroscopy, respectively. The NRA results gave water diffusion coefficients of 2.31–7.34 × 10⁻²¹ m²/s_, in good agreement with the literature data on borosilicate glasses altered in aqueous media. The glass hydration increased with relative humidity percentage and the SEM-EDS analysis showed a slight enrichment in Si and loss of Na in the hydrated glass layer compared with the pristine glass. The hydration rate of the ISG glass was little higher than that of the French SON68 glass hydrated using water vapor. The corrosion products were analcime, tobermorite, and calcite, which were typical of the SON68 glass hydrated in similar conditions.     

Bioactive-Tissue-Derived Nanocomposite Hydrogel for Permanent Arterial Embolization and Enhanced Vascular Healing

Transcatheter embolization is a minimally invasive procedure that uses embolic agents to intentionally block diseased or injured blood vessels for therapeutic purposes. Embolic agents in clinical practice are limited by recanalization, risk of non-target embolization, failure in coagulopathic patients, high cost, and toxicity. Here, a decellularized cardiac extracellular matrix (ECM)-based nanocomposite hydrogel is developed to provide superior mechanical stability, catheter injectability, retrievability, antibacterial properties, and biological activity to prevent recanalization. The embolic efficacy of the shear-thinning ECM-based hydrogel is shown in a porcine survival model of embolization in the iliac artery and the renal artery. The ECM-based hydrogel promotes arterial vessel wall remodeling and a fibroinflammatory response while undergoing significant biodegradation such that only 25% of the embolic material remains at 14 days. With its unprecedented proregenerative, antibacterial properties coupled with favorable mechanical properties, and its superior performance in anticoagulated blood, the ECM-based hydrogel has the potential to be a next-generation biofunctional embolic agent that can successfully treat a wide range of vascular diseases.     

Fuzzy logic-based performance improvement on MAC layer in wireless local area networks

There are many studies that have been done to improve the quality of service of wireless local area networks (WLANs). Institute of Electrical and Electronic Engineers (IEEE) WLAN are based on IEEE 802.11 protocol. The 802.11e medium access control (MAC) protocol is generally recommended for efficient quality of service in WLANs. There are many parameters in the MAC protocol that affect quality of services. Among these parameters, request to send threshold value (RSTV), fragmentation threshold value (FTV) and buffer size (BS) directly affect network performance. RSTV is used in the request to send/clear to send (RTS/CTS) mechanism in the carrier sense multiple access with collision avoidance (CSMA/CA) protocol for collision prevention. This parameter specifies the threshold used to activate the CSMA/CA protocol. FTV is another parameter that is used to send large-sized packets by dividing them into appropriate fragments during CSMA/CA transmission and reduces packet loss in WLAN. BS is another parameter that has a significant cost in the CSMA/CA model and also directly affects the performance. In this article, to improve the performance of WLANs, OPNET Modeler was used and ideal values were obtained for RSTV, FTV and BS by using fuzzy logic-based method. The values obtained by fuzzy logic were re-tested in OPNET Modeler, and the achieved improvement was as follows: for delay 36–38%, for load 2–10% and for throughput 25–44%, respectively. Thus, in WLANs, performance was improved by using fuzzy logic-based method.

     

A novel two-channel continuous-time time-interleaved 3rd-order sigma-delta modulator with integrator-sharing topology

This paper presents a 3rd-order two-path continuous-time time-interleaved (CTTI) delta-sigma modulator which is implemented in standard 90 nm CMOS technology. The architecture uses a novel method to resolve the delayless feedback path issue arising from the sharing of integrators between paths. By exploiting the concept of the time-interleaving techniques and through the use time domain equations, a conventional single path 3rd-order discrete-time (DT) ΔΣ modulator is converted into a corresponding two-path discrete-time time-interleaved (DTTI) counterpart. The equivalent CTTI version derived from the DTTI ΔΣ modulator by determining the DT loop filters and converting them to the equivalent continuous-time loop filters through the use of the Impulse Invariant Transformation. Sharing the integrators between two paths of the reported modulator makes it robust to path mismatch effects compared to the typical time-interleaved modulators which have individual integrators in all paths. The modulator achieves a dynamic range of 12 bits with an OverSampling Ratio of 16 over a bandwidth of 10 MHz and dissipates only 28 mW of power from a 1.8-V supply. The clock frequency of the modulator is 320 MHz but integrators, quantizers and DACs operate at 160 MHz.