Characterization of the Ion Beam Current Density of the RF Ion Source with Flat and Convex Extraction Systems

Silicon - The characterization of ion beam current density distribution and beam uniformity is crucial for improving broad-beam ion source technologies. The design of the broad ion beam extraction...     

Influence of Ni Interlayers on the Mechanical Properties of Ti6Al4V/(WC-Co) Friction Welds

Ni interlayers were introduced prior to dissimilar friction welding of Ti6Al4V base material to three cemented carbide substrates. The fracture strength of Ti6Al4V/(WC-6 wt% Co) welds were poor and were markedly improved when 20-µm thick Ni interlayers were introduced prior to dissimilar friction welding. These results were only produced when the (WC-6 wt% Co) cermet was electroplated prior to friction welding. When the Ti6Al4V alloy was electroplated prior to friction welding, fractured WC particles and cracking were observed in the (WC-Co) carbide substrate. The fracture strengths of Ti6Al4V/(WC-11 wt% Co) and Ti6Al4V/(WC-24 wt% Co) welds were not improved when 20-µm thick Ni interlayers were introduced prior to friction welding. During mechanical testing, the Ni layer retained at the dissimilar joint interface created a region of weakness.     

Statistical analysis of fiber-optic CDMA communication systems. I. Device modeling

In this paper, we present a new methodology for analysis of all-optical fiber-optic code-division multiple-access (FO-CDMA) networks. In this analysis, we propose statistical models, based on photon-counting techniques, for some basic elements of the network, such as splitters, combiners, star couplers, and FO-CDMA passive encoders/decoders. By following the statistical variation of the photon-count of the string of pulses that constitutes the address sequence in an FO-CDMA network, we will be able to reveal the quantum-limited optical signal-to-noise ratio (OSNR) required at the transmitter output to meet the performance limits. Moreover, considering receiver thermal noise and source extinction ratio, we explore the role of using an optical preamplifier before the detector and the dependence of the performance on the transmitted power and the weight of the employed optical orthogonal codes (OOCs).     

Estimation of Aeroelastic Parameters of Bridge Decks Using Neural Networks

A new method of estimating flutter derivatives using artificial neural networks is proposed. Unlike other computational fluid dynamics based numerical analyses, the proposed method estimates flutter derivatives utilizing previously measured experimental data. One of the advantages of the neural networks approach is that they can approximate a function of many dimensions. An efficient method has been developed to quantify the geometry of deck sections for neural network input. The output of the neural network is flutter derivatives. The flutter derivatives estimation network, which has been trained by the proposed methodology, is tested both for training sets and novel testing sets. The network shows reasonable performance for the novel sets, as well as outstanding performance for the training sets. Two variations of the proposed network are also presented, along with their estimation capability. The paper shows the potential of applying neural networks to wind force approximations.     

Seismic safety of lifelines—an optimum design method

Lifeline systems are vulnerable to two types of hazards arising from potential earthquake sources. These are the hazard of a fault-rupture strike on elements of a lifeline system and the hazard of overstress induced in different elements of the system because of the ground vibration. An optimum design method is presented in this paper for the design of a lifeline system for a maximum accepted probability of failure because of any of the two modes of failure. The method may be used to determine an optimum path between a number of fixed points which represent supply or demand stations in the system.     

Electro-optical characteristics of indium tin oxide (ITO) films: effect of thermal annealing

The effect of thermal annealing on the electrical and optical characteristics of ITO films prepared by reactive sputtering and thermal evaporation have been studied. The effect of the thermal annealing is to improve the conductivity and the optical transmission in the shorter wavelength region. The conductivity of the films increases with annealing temperature, this behaviour is associated with grain growth in the film.     

Sustainable Basin-Scale Water Allocation with Hydrologic State-Dependent Multi-Reservoir Operation Rules

This study extends the PSO-MODSIM model, integrating particle swarm optimization (PSO) algorithm and MODISM river basin decision support system (DSS) to determine optimal basin-scale water allocation, in two aspects. The first is deriving hydrologic state-dependent (conditional) operating rules to better account for drought and high-flow periods, and the second is direct, explicit consideration of sustainability criteria in the model’s formulation to have a better efficiency in basin-scale water allocation. Under conditional operating rules, the operational parameters of reservoir target storage levels and their priority rankings were conditioned on the hydrologic state of the system in a priority-based water allocation scheme. The role of conditional operating rules and policies were evaluated by comparing water shortages associated with objective function values under unconditional and conditional operating rules. Optimal basin-scale water allocation was then evaluated by incorporating reliability, vulnerability, reversibility and equity sustainability indices into the PSO objective function. The extended model was applied for water allocation in the Atrak River Basin, Iran. Results indicated improved distribution of water shortages by about 7.5% using conditional operating rules distinguishing dry, normal and wet hydrologic states. Alternative solutions with nearly identical objective function values were found with sustainability indices included in the model.     

Performance Assessment of a Coupled Particle Swarm Optimization and Network Flow Programming Model for Optimum Water Allocation

Water resources allocation problems are mainly categorized in two classes of simulation and optimization. In most cases, optimization problems due to the number of variables, constraints and nonlinear feasible search space are known as a challenging subject in the literature. In this research, by coupling particle swarm optimization (PSO) algorithm and a network flow programming (NFP) based river basin simulation model, a PSO-NFP hybrid structure is constructed for optimum water allocation planning. In the PSO-NFP model, the NFP core roles as the fast inner simulation engine for finding optimum values for a large number of water discharges in the network links (rivers and canals) and nodes (reservoirs and demands) while the heuristic PSO algorithm forms the outer optimization cover to search for the optimum values of reservoirs capacities and their storage priorities. In order to assess the performance of the PSO-NFP model, three hypothetical test problems are defined, and their equivalent nonlinear mathematical programs are developed in LINGO and the results are compared. Finally, the PSO-NFP model is applied in solving a real river basin water allocation problem. Results indicate that the applied method of coupling PSO and NFP has an efficient ability for handling river basin-scale water resources optimization problems.     

Low‐velocity impact of nanocomposite and polymer plates

Nanocomposites are more widely studied today because of higher stiffness, decreased permeability, thermal stability, and many other properties superior to those of regular polymers. However, manufacturers are concerned about implementing nanocomposites because of their lower impact properties with respect to the base polymer. This study focused on low‐velocity impact tests of a thermoplastic olefin by itself and with 5 wt % nanoclay. The impact tests were conducted at ?40, 23.9, and 65.6°C until the polymer and nanocomposite plates experienced complete striker penetration. The force–time and force–deflection responses obtained from the impact testing provided a means of comparing the impact performances of the two materials. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 96: 2309–2315, 2005     

Linear principal transformation: toward locating features in N-dimensional image space

Projection Functions have been widely used for facial feature extraction and optical/handwritten character recognition due to their simplicity and efficiency. Because these transformations are not one-to-one, they may result in mapping distinct points into one point, and consequently losing detailed information. Here, we solve this problem by defining an N-dimensional space to represent a single image. Then, we propose a one-to-one transformation in this new image space. The proposed method, which we referred to as Linear Principal Transformation (LPT), utilizes Eigen analysis to extract the vector with the highest Eigenvalue. Afterwards, extrema in this vector were analyzed to extract the features of interest. In order to evaluate the proposed method, we performed two sets of experiments on facial feature extraction and optical character recognition in three different data sets. The results show that the proposed algorithm outperforms the observed algorithms in the paper and achieves accuracy from 1.4 % up to 14 %, while it has a comparable time complexity and efficiency.