Preparation and characterization of proton‐exchange hybrid membranes

Two types of composite were prepared, based on a thermoplastic polymer, polyvinylidene fluoride (PVDF), and an elastomer, ethylene‐propylene‐diene terpolymer (EPDM), respectively. We obtained both series by addition of an inorganic proton‐conducting antimonic acid derivative (HSb) and polystyrene crosslinked with a small percentage of divinylbenzene (PS‐co‐DVB). From these composites, membranes were obtained and subjected to a heterogeneous‐phase sulfonation reaction with chlorosulfonic acid. All experimental materials were characterized from a morphological and electrical point of view, by means of techniques such as differential scanning calorimetry (DSC), dynamic mechanical analysis (DMA), non‐isothermal crystallization and complex impedance analysis. Copyright © 2005 Society of Chemical Industry     

Critical Shear Stress of Bimodal Sediment in Sand-Gravel Rivers

A new model for the critical shear stress and the transport of graded sediment is presented. The model is based on the size distribution of the bed surface and can be used to compute sediment transport rates in numerical simulations with an active layer model. This model makes a distinction between unimodal and bimodal sediments. It is assumed that all size fractions of unimodal sediments have the same critical shear stress while there is selective transport for the gravel fractions of bimodal sediments. A recently published laboratory transport data set is used to calibrate our model.     

Analysis of electrocardiograms during atrial fibrillation

The research discussed in this article is motivated by the search for an optimal classification of the different types of atrial fibrillation (AF) on the basis of recorded atrial signals. This would facilitate the selection of an optimal therapy. This article focuses on the biophysical models of the genesis of ECG waveforms during AF. The model of the electric activity of the atria was found to have sufficient realism to be used to describe the electric sources during AF. The inclusion of the volume conduction model resulted in electrocardiographic signals that are in all aspects similar to those observed clinically. The model is currently applied to solve various problems related to optimal signal preprocessing and extraction of features in AF signals for the classification of AF abnormalities. The biophysical model of the atrial activity is an essential element in this research, since it is capable of describing the electric source specifications derived from different hypotheses relating to the etiology of AF     

Associative retuning in the thalamic source of input to the amygdala and auditory cortex: Receptive field plasticity in the medial division of the medial geniculate body.

The medial division of the medial geniculate body (MGm) projects to the lateral amygdala and the upper layer of the auditory cortex and develops physiological plasticity rapidly during classical conditioning. The effects of learning on frequency receptive fields (RFs) in the MGm of the guinea pig have been determined. Classical conditioning (tone–footshock), as indexed by rapid development of conditioned bradycardia, produced conditioned stimulus (CS)–frequency specific RF plasticity: increased response at the CS frequency with decreased responses at other frequencies, both immediately and after a 1-hr retention period. Sensitization training produced only general changes in RFs. These findings are considered with reference to both the elicitation of amygdala-mediated, fear-conditioned responses and the mechanism of retrieval of information stored in the auditory cortex during acquisition. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Aide in decision-making: contribution to uncertainties in three-dimensional measurement

The authorities of the standards organization International Organization of Standardization (ISO) advocate mastering any uncertainties in all parts of the industrialization process. In the three-dimensional (3D) measurement process, uncertainty is usually obtained at the end of a battery of tests. It is defined as a whole because it includes several types of errors, known systematic components, unknown systematic components and random components. Automated calculations of uncertainty can be made based on statistics. This method is based on statistical concepts, which are in accordance with “The Guide to the expression of the uncertainty in measurement” (GUM). It also enables us to generate uncertainties on the verification of ISO specifications (or specs in the ISO directives). In the course of this article, a usage will be presented that takes the knowledge of uncertainties into account: this usage will help the operator to take a decision on the conformance of a mechanical part in reference to its conformance to geometric tolerance.     

On the role of conserved proline residues in the structure and function of Clostridium pasteurianum 2[4Fe-4S] ferredoxin

The widespread occurrence of Pro residues adjacent to Cys ligandsin the sequences of [4Fe-4S] electron transfer proteins hasnot yet found a functional basis. The two such Pro of Clostridiumpasteurianum 2[4Fe-4S] ferredoxin have been probed by site-directedmutagenesis. Any one of them, but not both simultaneously, canbe substituted without impairing the proper folding of the protein.The reduction potentials of the ferredoxin variants fall ina narrow range of <20 mV above the potential of the nativeprotein. The biological activities with C.pasteurianum hydrogenaseand pyruvate-ferredoxin oxidoreductase do not change significantly,except when Lys replaces Pro. In these cases, the data suggestthat the two clusters of 2[4Fe-4S] ferredoxin may not alwaysbe equivalent in the interaction with the redox partners. Destabilizationof the structure has been observed as the consequence of theProl9 or Pro48 substitutions. Using 2-D NMR, this effect hasbeen associated with perturbations of both the hydrogen bondnetwork and one amino acid side chain around the [4Fe-4S] clusters.Thus, the conserved Pro found in the binding motif of [4Fe-4S]clusters in proteins strongly stabilizes the active site butdoes not play an essential role in the mechanism of electrontransfer.     

Sulfate attack of concrete building foundations induced by sewage waters

A case history of a severe degradation of concrete foundation plinths and piers of an about-35-year-old building located in Northern Italy is described. Significant amounts of gypsum, near ettringite and/or thaumasite were detected by X-ray diffraction analyses performed on ground concrete samples. Large gypsum crystals were mainly located at the interface between the cement paste and aggregates, as observed by scanning electron microscopy coupled to energy-dispersive spectroscopy microanalysis. The degradation effects increased with decreasing the distance of concrete structures from an absorbing well located in the courtyard of the building. The well was recognized as the sulfate source due to the microorganism metabolism of sulfur compounds present in the sewage. Consequences of this attack were a very poor bond strength between cement paste and aggregates and a severe cracking of the concrete cover of the steel reinforcement.     

Synthesis, structure and catalytic properties of Fe-substituted barium hexaaluminates

A sol–gel method using Ba and Al isopropylates and iron nitrate has been used to synthesise barium hexaaluminate partially substituted with iron. After calcination under oxygen at 1200°C the -alumina structure was obtained. Formation of the mixed BaFe_xAl_12-xO₁₉ phase occurred for x=1–4. XRD measurements showed a good crystallinity of the structure and expansion of unit cell parameters due to the presence of larger Fe³⁺ ions substituting Al³⁺ ones in octahedral sites only. Mössbauer spectroscopy revealed that Fe³⁺ ions are present in four different octahedral sites slightly distorted. Catalytic activity in methane combustion showed that an optimum was obtained for solid containing 2 Fe ions per unit cell: the increase of the amount of introduced iron was counterbalanced by the decrease of specific surface area. Intrinsic activities have been calculated for the four solids in both the fresh and aged states. It is observed that increasing iron content increases relative activities in the same ratio as the populations of iron located in two sites as deduced from Mössbauer spectroscopy. It is then tentatively assumed that activity is attributed to octahedrally coordinated Fe³⁺ ions in some specific sites.     

Parameters governing strain induced crystallization in filled natural rubber

A series of in situ synchrotron X-ray diffraction experiments are performed during the stretching of weakly and highly vulcanized carbon black (CB), silica and grafted silica filled natural rubber sample (NR). Conversely to literature, Mullins effect observed after one stretching cycle modifies the strain induced crystallization (SIC) behaviour of the sample. The onset of crystallization is ruled by the strain amplification induced by the filler presence. Moreover, fillers (CB and silica) behave as additional crosslinks into NR network, through filler-rubber interactions that either accelerate or slow down the crystallization rate depending on NR matrix chemical crosslink density. This is consistent with the assumption that effective network density, which is due to chemical crosslinks, entanglements, and filler-rubber interactions, controls the crystallization rate.