Generation of gas bubbles in microflow using micropipette with ultrasound

Ultrasound was applied to a micropipette micromixer to improve dispersion of gas and liquid in a microchannel. Flow visualization using a high-speed camera was performed to examine the effect of ultrasonic irradiation on bubble generation in the microchannel. Basically, nitrogen gas was injected using a (0.5 µm ID) glass micropipette into ethanol flowing in a rectangular (100 µm×200 µm) microchannel on polydimethylsiloxane (PDMS). Gas and liquid flow rates were regulated using mass flow controllers. At aflow condition that is typical of bubbly flow, ultrasound was transmitted into the microchannel using a piezo-electric (PZT) transducer over a range of operating voltages (2 to 200 Vp-p) and frequencies (50 to 60 kHz). Images captured during the action of the PZT transducer indicate that bubble formation is influenced by ultrasound. When subjected to ultrasound above 50 Vp-p and at the resonant frequency of the PZT transducer, bubbles formed that were smaller and closer together, signifying enhanced shearing of the gas at the micropipette tip by the liquid. The observation of gas slugs occurring sooner might be attributed to the coalescence of gas bubbles that became closely spaced.     

Synthesis and surface properties of novel fluoroalkyl end-capped amphiphilic fullerene cooligomers

New fluoroalkyl end-capped fullerene cooligomers were prepared by the reactions of fluoroalkanoyl peroxides with fullerene and comonomers such as acryloylmorpholine, N,N-dimethylacrylamide and acrylic acid. These fluorinated fullerene cooligomers were easily soluble in water and common organic solvents, and were able to reduce the surface tensions of both water and benzene, quite effectively. Additionally, these fullerene cooligomers were found to form a stable monomolecular film at the air-water interface, and the modified polystyrene surface treated with these cooligomers was shown to have a strong hydrophilicity with good oil repellency.     

S06 桂花幻想之月夜——梦天

作为厦门园博会风景园林师园之一,本园以"梦天"为主题,结合东端开阔的水面条件,以月、桂、石为材,以天气的变化、月亮的位置、植物的变化、庭园本身的变化为主轴进行设计,使其成为一座可持续的庭园.     

High-performance carbon counter electrode for dye-sensitized solar cells

Here, we reported that a new carbon electrode prepared with an activated carbon was superior to a Pt sputtered electrode as the counter electrode of dye-sensitized solar cells. The photovoltaic performance was largely influenced by the roughness factor of carbon electrode. The open-circuit voltage increased by about 60 mV using the carbon counter electrode compared to the Pt counter electrode because of positive shift of the formal potential for I₃⁻/I⁻ couple.     

Oxygen consumption for constant work is minimal at lowest working contractility in normal dog hearts

We tested whether minimal myocardial oxygen consumption (MVO2) for a given external work would exist in the middle of a normal contractility range as previously predicted theoretically. The left ventricle of the excised cross-circulated dog heart preparation was connected to a volume servo pump. Myocardial contractility in terms of ventricular end-systolic elastance (Emax) was gradually increased from control 8.9 +/- 3.4 (mean +/- SD) to 30.0 mmHg/(ml/100 g) by epinephrine and decreased to 1.8 mmHg/(ml/100 g) by propranolol while heart rate, end-systolic pressure and stroke work were kept constant. MVO2 was determined as the product of total coronary flow and coronary arteriovenous oxygen content difference in each contractile state. We plotted MVO2 values against E(max) values in each heart. The MVO2-E(max) relation for a constant cardiac work showed that MVO2 was minimal at the low end of the covered E(max) range. We conclude that minimal MVO2 for a given cardiac work is generally obtained at the lowest working contractility in normal dog hearts. This conclusion might pose some problems in the previous theoretical prediction as to the contractility that achieves the minimal MVO2 in a given external work.     

Molecular aggregation of PEEK with PES blends and the block copolymers composed of PEEK and PES components

Polymer blends of PEEK with PES were prepared by the solution blending method. Copolymers composed of PEEK and PES components were synthesized from these oligomers. The formation conditions exerted an influence over the molecular aggregation and the crystallization behaviors of the blend films and block copolymers which were examined by X-ray diffractometry and DSC analysis. As a result, phase-separation in the blend films was found when the formation temperature was high. The blend films formed at 340°C, quenched and annealed at 180°C, exhibited the same crystallization behavior as those of PEEK. In the case of the blend films formed at 300°C, the annealing of the films at 250°C was required to crystallize the blend films. The T_g of a copolymer with a PEEK component content of more than 50% tends to shift toward a higher temperature than the T_g of PEEK itself, and the T_m of the copolymer toward a lower temperature than that of PEEK ist.     

Catching a molecule at the air-water interface: Dynamic pore array for molecular recognition

As a soft and flexible porous structure, a pore array of a steroid cyclophane SC(OH), which consists of the rigid 1,6,20,25-tetraaza[6.1.6.1]paracyclophane ring connected to four steroid moieties (cholic acid) through flexible L-lysine spacers, was prepared at the air-water interface. As confirmed by surface pressure (π)-molecular area (A) isotherms, transition between open conformation and cavity conformation of the SC(OH) molecule was reversibly induced upon repeated compression and expansion of its monolayer at pH 11 where amino groups of the lysine residues are not fully deprotonated. Capture and release of an aqueous fluorescent guest (TNS) by SC(OH) was observed upon dynamic cavity formation through surface fluorescence spectroscopy. At pH 12, dynamic cavity formation of SC(OH) was sufficiently suppressed, and the capture and release of an aqueous TNS by the monolayer was not virtually observed. Lessened electrostatic repulsion between the SC(OH) molecules due to conversion of ammonium to free amine may prevent the cavity from reopening. The importance of dynamic nature of cavity formation on the guest binding was also proved by control experiments using SC(H), which cannot form cavity conformation at any surface pressures at both pH 11 and 12.     

Mutational analysis of structure--activity relationships in human tumor necrosis factor-alpha

To determine the region of human tumor necrosis factor-alpha(TNF-), essential for cytotoxic activity against mouse L-M cells,single amino-acid-substituted TNF- mutant proteins (muteins)were produced in Escherichia coli by protein engineering techniques.An expression plasmid for TNF- was mutagenized by passage throughan E.coli mutD5 mutator strain and by oligonucleotide-directedmutagenesis. Approximately 100 single amino-acid-substitutedTNF- muteins were produced and assayed for cytotoxic activity.The cytotoxic activities of purified TNF- muteins, e.g. TNF-31T,-32Y, -82D, -85H, -115L, -141Y, -144K and -146E, were < 1%of that of parent TNF-. These results indicate that the integrityof at least four distinct regions of the TNF- molecule is requiredfor full biological activity. These regions are designated asfollows: region I, from position 30 to 32; region II, from position82 to 89; region III, from position 115 to 117; region FV, fromposition 141 to 146. In addition, TNF-141Y could not completelycompete with parent TNF- for binding to the receptor. This demonstratesthat region IV, and at least aspartk acid at position 141, mustbe involved in the TNF receptor binding site.     

Copolymerization of ethanesultam with 2-methyl-2-oxazoline

Summary This paper describes the so-called No Catalyst Copolymerization between dioxo-1,1-thiazetidine-1,2(Ethanesultam; ESm) and 2-methyl-2-oxazoline. The copolymerization took place without any added initiator to produce copolymers of MeOZO and ESm. The structure of the copolymer was determined by the IR and NMR spectra, elemental analysis, as well as by the result of an alkaline hydrolysis of the copolymer. The reaction scheme of the copolymerization via zwitterion mechanism (Eq 3–5) was proposed.