Modelling acute renal failure using blood and breath biomarkers in rats

This paper compares three methods for estimating renal function, as tested in rats. Acute renal failure (ARF) was induced via a 60-min bilateral renal artery clamp in 8 Sprague-Dawley rats and renal function was monitored for 1 week post-surgery. A two-compartment model was developed for estimating glomerular filtration via a bolus injection of a radio-labelled inulin tracer, and was compared with an estimated creatinine clearance method, modified using the Cockcroft-Gault equation for rats. These two methods were compared with selected ion flow tube-mass spectrometry (SIFT-MS) monitoring of breath analytes. Determination of renal function via SIFT-MS is desirable since results are available non-invasively and in real time. Relative decreases in renal function show very good correlation between all 3 methods (R² = 0.84, 0.91 and 0.72 for breath-inulin, inulin-creatinine, and breath-creatinine correlations, respectively), and indicate good promise for fast, non-invasive determination of renal function via breath testing.     

SDF classifier revisited

This paper is addressing problems related to the construction of classifiers based on the Similarity Discriminant Function (SDF), in which the traditional vector representation of a pattern is replaced with matrix data. We introduce potential modifications of the matrix data structure and propose new variants of the SDF. The algorithms that we present were tested on images of handwritten digits and on photographs of human faces, taken from the ORL and CMU‐PIE databases. The results of experiments show that our modifications significantly improved the performance of the original SDF classifier.     

An Analysis of Intermetallic Bonding between a Ring Carrier and an Aluminum Piston Alloy

This paper presents the results of an analysis of the formation of an intermetallic bond between a ring carrier and an aluminum piston alloy. The ring carrier is made of austenitic cast iron (Ni-Resist) to increase the wear resistance of the first ring groove and is applied in highly loaded diesel engines. The most important thing is that the Ni-Resist (ferrous) must be bonded with a non-ferrous piston material during the casting of the piston. A metallographic investigation using an optical microscope in combination with the SEM/EDS analysis of the quality of the intermetallic bonding layer was done. The test results show that if the proper conditions are met, then the preparation of the ring carrier can be made successfully, as can the formation of the metal connection between the two materials of different qualities.     

Ultrastructural changes in the cemento‐enamel junction caused by acidic beverages: An in vitro study

The present in vitro study was aimed at evaluating the morphological changes in the cemento‐enamel junction (CEJ) after exposure to acidic beverages using the scanning electron microscopy (SEM). The initial pH and titratable acidity (TA) was analyzed from follow groups: (I) Coca cola, (II) orange juice, (III) Cedevita, (IV) Red Bull, (V) Somersby cider, and (VI) white wine. The CEJ samples (n = 64), obtained from unerupted third molars, were allocated to one control (artificial saliva, n = 16) and six experimental groups (n = 8). The experimental samples were immersed in beverages (50 ml) for 15 min, three times daily, 10 days, and in artificial saliva between immersions. SEM analysis was performed in a blind manner, according to scoring scale. One‐way ANOVA and Tukey's post hoc tests, as well as Kruskal–Wallis and Mann–Whitney U test used for statistical analysis. The pH values of the acidic beverages ranged from 2.65 (Coca cola) to 3.73 (orange juice), and TA ranged from 1.90 ml (Coca cola) to 5.70 ml (orange juice) of NaOH to reach pH 7.0. The SEM analysis indicated statistically significant differences between the control samples and those immersed in acidic beverages. The Groups IV, I, and II, showed the highest CEJ damage grade while those of the Group VI were the lowest. All the tested acidic beverages caused morphological changes in the CEJ with a smaller or larger exposure of dentine surface, and were not always related to the pH or TA of acidic beverages.     

Thermal analysis and microscopic characterization of the piston alloy AlSi13Cu4Ni2Mg

In this research paper, the phases identified by thermal and microscopic analysis of the piston alloy AlSi13Cu4Ni2Mg, which was solidified under different conditions, are presented and compared with different piston alloys. Piston alloys are a group of casting Al–Si alloys, well-known as wear resistant materials, which are widely used as the piston materials for internal combustion engines because of their low thermal expansion coefficient and high wear resistance when alloyed with other elements such as copper, magnesium and nickel. Depending on the combination of alloying elements and other impacting factors, pistons alloys with different mechanical and physical properties are obtained.     

Imaging of the expansion of femtosecond-laser-produced silicon plasma atoms by off-resonant planar laser-induced fluorescence

Planar laser-induced fluorescence measurements were used to investigate the expansion dynamics of a femtosecond laser-induced plasma. Temporally and spatially resolved measurements were performed to monitor the atoms that were ablated from a silicon target. A dye laser (lambda = 288.16 nm) was used to excite fluorescence signals. The radiation of an off-resonant transition (Si 390.55 nm) was observed at different distances from the target surface. This allowed easy detection of the ablated Si atoms without problems caused by scattered laser light. Abel inversion was applied to obtain the radial distribution of the Si atoms. The atom distribution in the plasma shows some peculiarities, depending on the crater depth.     

Assessment of cytotoxicity and immune compatibility of phytochemicals‐mediated biosynthesised silver nanoparticles using Cynara scolymus

The study was focused on the phytochemicals‐mediated biosynthesis of silver nanoparticles using leaf extracts and infusions from Cynara scolymus. To identify the antioxidant activity and total phenolic content, the 1,1‐diphenyl‐1‐picrylhydrazyl and Folin–Ciocalteau methods were applied, respectively. The formation and stability of the reduced silver ions were monitored by UV–vis spectrophotometer. The particle sizes of the silver nanoparticles were characterised using the dynamic light scattering technique and scanning electron microscope. The phase composition of the obtained silver nanoparticles was characterised by X‐ray diffraction. The silver nanoparticles suspension, artichoke infusion, and silver ions were separately tested towards potential cytotoxicity and pro‐inflammatory effect using mouse fibroblasts and human monocytes cell line, respectively. The total phenolic content and antioxidant activity of ethanol extract and infusion were found significantly higher as compared to aqueous extract and infusion. The UV–visible spectrophotometric analysis revealed the presence of the characteristic absorption band of the Ag nanoparticles. Moreover, it was found that with the increasing volume of plant extract, the average size of particles was increased. Biocompatibility results evidently showed that silver nanoparticles do not induce monocyte activation, however in order to avoid their cytotoxicity suspension at a concentration <2 ppm should be applied.Inspec keywords: pharmaceuticals, health and safety, renewable materials, toxicology, organic compounds, antibacterial activity, X‐ray diffraction, nanomedicine, nanoparticles, nanofabrication, suspensions, ultraviolet spectra, visible spectra, scanning electron microscopy, silver, particle sizeOther keywords: phytochemicals‐mediated biosynthesis, antioxidant activity, total phenolic content, dynamic light scattering technique, silver nanoparticles suspension, scanning electron microscopy, Cynara scolymus, 1,1 diphenyl‐1‐picrylhydrazyl method, cytotoxicity, immune compatibility, leaf extracts, UV‐vis spectrophotometry, particle size, Folin‐Ciocalteau methods, phase composition, X‐ray diffraction, artichoke infusion, pro‐inflammatory effect, mouse fibroblasts, human monocytes cell line, Ag     

Functional properties of protein preparations from amaranth seeds in model system

The gross chemical composition and functional properties (solubility, emulsifying and foaming properties) of different amaranth protein preparations were studied in model systems and were compared to those of casein and soy protein isolates. Preparations of alkaline-soluble total protein, albumin, globulin, and glutelin-like alkaline-soluble residual protein were produced from two different types of defatted amaranth meals by extraction and fractionation. Although similarity can be shown between protein patterns of legumes (including soy) and amaranth, the emulsifying and foaming properties of amaranth protein preparations are relatively poor in comparison to the reference proteins, except foaming properties of albumin preparations. Nevertheless, taking in mind that these properties depend on interactions with other food components and textural requirements of individual food products, the amaranth protein preparations may be treated as potential protein sources and food ingredients.