Experimental study of interzonal natural convection through an aperture

The work was concerned with measuring natural convection through an aperture between two zones in an environmental chamber. Airflow rates between the two zones were measured using a tracer-gas decay technique, and the temperature at the centre of each zone was measured using thermocouples. Zone 1 was heated to various temperatures in the range 18–38°C using thermostatically controlled heaters. Zone 2 was unheated. A multipoint sampling unit was used to collect a tracer-gas sample from each zone. The concentration of SF₆ tracer was measured using an infra-red gas analyzer. The heat and mass flow rates between the two zones were calculated from the tracer-gas concentrations and temperature differences. Results were compared with values predicted by existing algorithms for two-zone enclosures. The mass flow rate through the aperture was found to be a function of the temperature difference between the two zones.     

Evaporated Thin Films of CdS and CdTe: Optimization for Photovoltaic Applications

Thin films of cadmium sulphide and cadmium telluride have been prepared by thermal evaporation under various conditions of deposition. These films have been characterized optically. electrically and for structure determination. The results of these characterizations along with the initial results of all thin film CdS/CdTe solar cells are presented in this paper     

A storage heat pump using an ‘ozone-friendly’ refrigerant

The paper describes the integration of a chemical and a vapour-compression heat pump for energy storage applications. The vapour-compression system is designed to operate using the UK cheap rate ‘Economy 7’ electricity tariff. The system is characterized thermodynamically using various refrigerant/absorbent pairs in the chemical storage circuit and an ozone-friendly refrigerant, R134a, in the vapour-compression circuit. Results indicate that the H₂O/Na₂S pair provides a high energy storage density and is the most suitable for use in this system. The paper also describes the design features of a domestic-sized version of this heat pump system. Air in the sunspace (conservatory) of a house was used as a heat source for the heat pump.     

Estimation of zone effective-volume using tracer-gas techniques

The concentration-decay and pulse-injection tracer-gas techniques were used to evaluate the effective volume of a zone. Measurements of airflow rates were carried out in an environmental chamber using SF₆ as the tracer gas. Results showed that the flow rate estimated from the concentration-decay technique is about 4·5–14·3% higher than actual flow rate if the effective volume of the chamber is assumed to be equal to the physical volume. The effective volume, estimated from tracer-gas measurements, was found to be about 1·5–2·7% higher than the physical volume of the chamber.     

Na+ and/or Cl− Toxicities Determine Salt Sensitivity in Soybean (Glycine max (L.) Merr.), Mungbean (Vigna radiata (L.) R. Wilczek), Cowpea (Vigna unguiculata (L.) Walp.), and Common Bean (Phaseolus vulgaris L.)

Grain legumes are important crops, but they are salt sensitive. This research dissected the responses of four (sub)tropical grain legumes to ionic components (Na⁺ and/or Cl⁻) of salt stress. Soybean, mungbean, cowpea, and common bean were subjected to NaCl, Na⁺ salts (without Cl⁻), Cl⁻ salts (without Na⁺), and a “high cation” negative control for 57 days. Growth, leaf gas exchange, and tissue ion concentrations were assessed at different growing stages. For soybean, NaCl and Na⁺ salts impaired seed dry mass (30% of control), more so than Cl⁻ salts (60% of control). All treatments impaired mungbean growth, with NaCl and Cl⁻ salt treatments affecting seed dry mass the most (2% of control). For cowpea, NaCl had the greatest adverse impact on seed dry mass (20% of control), while Na⁺ salts and Cl⁻ salts had similar intermediate effects (~45% of control). For common bean, NaCl had the greatest adverse effect on seed dry mass (4% of control), while Na⁺ salts and Cl⁻ salts impaired seed dry mass to a lesser extent (~45% of control). NaCl and Na⁺ salts (without Cl⁻) affected the photosynthesis (P_n) of soybean more than Cl⁻ salts (without Na⁺) (50% of control), while the reverse was true for mungbean. Na⁺ salts (without Cl⁻), Cl⁻ salts (without Na⁺), and NaCl had similar adverse effects on P_n of cowpea and common bean (~70% of control). In conclusion, salt sensitivity is predominantly determined by Na⁺ toxicity in soybean, Cl⁻ toxicity in mungbean, and both Na⁺ and Cl⁻ toxicity in cowpea and common bean.     

Performance evaluation of dynamic probabilistic broadcasting for flooding in mobile ad hoc networks

In mobile ad hoc networks (MANETs), flooding is a required message dissemination technique for network-wide broadcast. The conventional blind flooding algorithm causes broadcast storm problem, a high number of unnecessary packet rebroadcasts thus resulting in high contention and packet collisions. This paper proposes a new probabilistic approach that dynamically fine-tunes the rebroadcasting probability of a node for routing request packets (RREQs) according to the number of neighbour nodes. We evaluate the performance of the proposed approach for the ad hoc on demand distance vector (AODV) routing protocol and compared against the blind flooding, fixed probabilistic and adjusted probabilistic flooding [L.M.M.M. Bani-Yassein, M. Ould-Khaoua et al., Performance analysis of adjusted probabilistic broadcasting in mobile ad hoc networks, International Journal of Wireless Information Networks 13(2) (2006) 127–140; M.B. Yassein, M.O. Khaoua et al., Improving route discovery in on-demand routing protocols using local topology information in MANETs, Proceedings of the ACM international workshop on Performance Monitoring, Measurement, and Evaluation of Heterogeneous Wireless and Wired Networks, Terromolinos, Spain, ACM Press, 2006, pp. 95–99.] approaches. The simulation results show that our proposed approach demonstrates better performance than blind flooding, fixed probabilistic and adjusted flooding approaches.     

The optimal solution for the flow of a fourth-grade fluid with partial slip

The steady flow of a non-Newtonian fluid when slippage between the plate and the fluid occurs is considered. The constitutive equations of the fluid are modeled for a fourth-grade non-Newtonian fluid with partial slip; they give rise to nonlinear boundary value problems. Analytical solutions are obtained using powerful analytic techniques for solving nonlinear problems, homotopy perturbation and optimal homotopy asymptotic methods. The results obtained are compared with the numerical results and it is shown that solutions exist for all values of the non-Newtonian parameters. The solutions valid for the no-slip condition for all values of the non-Newtonian parameters can be derived as special cases of the present analysis. Finally the solutions are discussed using a graphical approach.     

Evaluation of a large dish‐type concentrator solar lighting system for underground car park

To utilize solar energy more efficiently and reduce lighting power consumption in underground public spaces such as car park, a large dish‐type concentrator solar lighting system is put forward along with its evaluation, which is a unique design to apply a laminated layer of beam split thin‐film coating and thin‐film solar cells onto the dish reflector. The collected sunlight is split into 2 parts, one being reflected into a fiber optical bundle and transmitted for daylighting, while the rest being absorbed by solar cells for electricity generation as the other way to replenish daylighting. A set of 4 solar lighting systems using 3.28‐m diameter dish are designed to meet the lighting requirement in a 1771‐m² underground car park. A mathematical model is adopted to calculate the output power and conversion efficiency of solar cells distributed on the parabolic dish surface. The indoor illuminance distribution is given by lighting simulation. The results indicate that the average daylight illuminance in the car park can vary between 62.7 and 284 lx on February 25, 2016 and between 62.7 and 353 lx on August 17, 2016 for 2 chosen days, respectively. For the presented design, the electricity produced by solar cells is just enough to power light‐emitting diodes for lighting meeting a criterion at night. Considering about 19% conversion efficiency of solar cells and the efficacy of 129.5 lm/W of light‐emitting diodes, the hybrid solar lighting system can have about 40% utilization ratio of solar energy, so it can be concluded that a sufficient lighting provision can be provided by the proposed large dish‐type concentrator solar lighting system for applications in underground car park.     

Influence of fine ceramic aggregates on the residual properties of concrete subjected to elevated temperature

The residual properties of concrete subjected to elevated temperature are of importance to assess the stability of the structure. This paper investigates the performance of concrete containing white ware ceramic sand exposed to elevated temperature. Concrete mixes containing 0%, 50%, and 100% ceramic sand were prepared. The specimen were exposed to elevated temperatures of 200°C, 500°C, and 800°C for a duration of 60 minutes. Their residual mechanical properties (compressive strength, split tensile strength), ultra sonic pulse velocity, and mass change for different cooling regimes were investigated and compared among specimen. The results showed that incorporation of ceramic sand in concrete mixes improved the resistance against elevated temperature of hardened concrete.