Mass transfer in polycrystalline ytterbium monosilicate under oxygen potential gradients at high temperatures

Mass transfer in polycrystalline Yb₂SiO₅ wafers with precise composition control was evaluated and analyzed by oxygen permeation experiments at high temperatures using an oxygen tracer. Oxygen permeation proceeded due to mutual grain boundary diffusion of oxide ions and Yb ions without synergistic effects such as acceleration or suppression. The oxygen shielding properties of Yb₂SiO₅ were compared with those of the other line compounds such as Yb₂Si₂O₇ and Al₂O₃ based on the determined mass transfer parameters. It was found that the more preferentially an oxide ion diffuses in the grain boundary compared to the interior of the grain, the greater the effect of suppressing the movement of the oxide ion by applying an oxygen potential gradient becomes.     

Preparation of TiB2 sintered compacts by hot pressing

A sintered compact of titanium diboride (TiB₂) was prepared by hot pressing of the synthesized TiB₂ powder, which was obtained by a solid-state reaction between TiN and amorphous boron. Densification of the sintered compact occurred at 20 MPa and 1800° C for 5 to 60 min with the aid of a reaction sintering, including the TiB₂ formation reaction between excess 20 at % amorphous boron in the as-synthesized powder (TiB₂ + 0.2B) and intentionally added 10 at % titanium metal. A homogeneous sintered compact of a single phase of TiB₂, which was prepared by hot pressing for 30 min from the starting powder composition [(TiB₂ + 0.2B) + 0.1 Ti], had a fine-grained microstructure composed of TiB₂ grains with diameters of 2 to 3 m. The bulk density was 4.47 g cm^–3, i.e. 98% of the theoretical density. The microhardness, transverse rupture strength and fracture toughness of the TiB₂ sintered compact were 2850 kg mm^–2, 48 kg mm^–2 and 2.4 MN m^–3/2, respectively. The thermal expansion coefficient increased with increasing temperature up to 400° C and had a constant value of 8.8 x 10^–6 deg^–1 above 500° C.     

Reaction control of TiB2 formation from titanium metal and amorphous boron

TiB₂ powder was synthesized by a controlled formation reaction from titanium metal and amorphous boron. Precursory TiB₂ formed by the pretreatment of the mixed powder (mole ratio: B/Ti=2.0) at 600° C for 60 min in an argon stream. Hollow TiB₂ powder with an average grain size of 15m was obtained by subsequent heat treatment above 900° C for more than 60 min in an argon stream. The formation reaction of TiB₂ powder was further controlled by pretreatment of the mixed powder at 600° C for 60 min in a hydrogen and argon stream and subsequent heat treatment at 1000° C for 360 min in an argon stream, when hollow-free TiB₂ powder was formed by a milder formation reaction between amorphous boron and the reformed titanium metal with hydrogen diffused lattice.     

Synthesis of TiB2 powder from a mixture of TiN and amorphous boron

TiB₂ powder was synthesized by solid state reaction using amorphous boron and TiN as a source of titanium. The TiB₂ formation did not occur at all in a nitrogen atmosphere even at 1400° C. TiB₂ formed above 1100° C in argon and hydrogen atmospheres. The only crystalline phase of TiB₂ powder was favourably synthesized at 1400° C for 360 min in an argon atmosphere from a starting powder with a composition containing excess boron (B/Ti = 2.2). The synthesized powder was well dispersed and had a particle size of 0.5 to 2 µm. The powder activity was evaluated by sintering at 4 G Pa and 1300 to 1600° C for 15 min.     

Evidence that the cannabinoid CB1 receptor is a 2-arachidonoylglycerol receptor. Structure-activity relationship of 2-arachidonoylglycerol, ether-linked analogues, and related compounds

An endogenous cannabimimetic molecule, 2-arachidonoylglycerol, induces a rapid, transient increase in intracellular free Ca2+ concentrations in NG108-15 cells through a cannabinoid CB1 receptor-dependent mechanism. We examined the activities of 24 relevant compounds (2-arachidonoylglycerol, its structural analogues, and several synthetic cannabinoids). We found that 2-arachidonoylglycerol is the most potent compound examined so far: its activity was detectable from as low as 0.3 nM, and the maximal response induced by 2-arachidonoylglycerol exceeded the responses induced by others. Activities of HU-210 and CP55940, potent cannabinoid receptor agonists, were also detectable from as low as 0.3 nM, whereas the maximal responses induced by these compounds were low compared with 2-arachidonoylglycerol. Anandamide was also found to act as a partial agonist in this assay system. We confirmed that free arachidonic acid failed to elicit a response. Furthermore, we found that a metabolically stable ether-linked analogue of 2-arachidonoylglycerol possesses appreciable agonistic activity, although its activity was apparently lower than that of 2-arachidonoylglycerol. We also confirmed that pretreating cells with various cannabinoid receptor agonists nullified the response induced by 2-arachidonoylglycerol, whereas pretreating cells with other neurotransmitters or neuromodulators did not affect the response. These results strongly suggested that the cannabinoid CB1 receptor is originally a 2-arachidonoylglycerol receptor, and 2-arachidonoylglycerol is the intrinsic physiological ligand for the cannabinoid CB1 receptor.     

Development of a 400 kJ Nb3Sn superconducting magnet for an SMES system

An Nb₃Sn superconducting magnet to store 400 kJ was developed as a unit magnet for a 2.4-MJ SMES system used for stabilization studies of electrical power systems. The superconducting magnet consists of a cryostat and an Nb₃Sn coil. The dimensions of the coil are: 340 mm inner diameter, 700 mm outer diameter and 177 mm axial length. The pool-cooled coil is a stack of 20 Nb₃Sn double pancakes, and the cooling channels are aligned between pancake coils. To reduce Joule loss in electrical power converters, the maximum operating current of the coil is designed to be 350 A, which is one order of magnitude less than the operating currents of similar scale coils for pulse use. The conductor is an Nb₃Sn monolithic conductor with cross section 1.50 × 2.38 mm. For good superconducting stability and high dielectric strength of the coil, the Nb₃Sn double pancakes were wound by the react-and-wind technique. Operation of dc current to 105% (367.5 A) of the design operating current was achieved without quench. After the whole of the coil was exposed out of liquid helium, the coil did not quench under 120 A current operation for more than 2 hours. It was verified that the coil was stable for the SMES system. © 1998 Scripta Technica, Inc. Electr Eng Jpn, 121(3): 44–52, 1997     

Molecular mechanics of calcium-myristoyl switches

Many eukaryotic cellular and viral proteins have a covalently attached myristoyl group at the amino terminus. One such protein is recoverin, a calcium sensor in retinal rod cells, which controls the lifetime of photoexcited rhodopsin by inhibiting rhodopsin kinase. Recoverin has a relative molecular mass of 23,000 (M[r] 23K), and contains an amino-terminal myristoyl group (or related acyl group) and four EF hands. The binding of two Ca2+ ions to recoverin leads to its translocation from the cytosol to the disc membrane. In the Ca2+-free state, the myristoyl group is sequestered in a deep hydrophobic box, where it is clamped by multiple residues contributed by three of the EF hands. We have used nuclear magnetic resonance to show that Ca2+ induces the unclamping and extrusion of the myristoyl group, enabling it to interact with a lipid bilayer membrane. The transition is also accompanied by a 45-degree rotation of the amino-terminal domain relative to the carboxy-terminal domain, and many hydrophobic residues are exposed. The conservation of the myristoyl binding site and two swivels in recoverin homologues from yeast to humans indicates that calcium-myristoyl switches are ancient devices for controlling calcium-sensitive processes.