Nanogrooved carbon microtubes for wet three‐dimensional printing of conductive composite structures

Recent advances in three‐dimensional (3D) printing have enabled the fabrication of interesting structures which are not achievable using traditional fabrication approaches. The 3D printing of carbon microtube composite inks allows fabrication of conductive structures for practical applications in soft robotics and tissue engineering. However, it is challenging to achieve 3D printed structures from solution‐based composite inks, which requires an additional process to solidify the ink. Here, we introduce a wet 3D printing technique which uses a coagulation bath to fabricate carbon microtube composite structures. We show that through a facile nanogrooving approach which introduces cavitation and channels on carbon microtubes, enhanced interfacial interactions with a chitosan polymer matrix are achieved. Consequently, the mechanical properties of the 3D printed composites improve when nanogrooved carbon microtubes are used, compared to untreated microtubes. We show that by carefully controlling the coagulation bath, extrusion pressure, printing distance and printed line distance, we can 3D print composite lattices which are composed of well‐defined and separated printed lines. The conductive composite 3D structures with highly customised design presented in this work provide a suitable platform for applications ranging from soft robotics to smart tissue engineering scaffolds. © 2019 Society of Chemical Industry     

Evaluation of microbial toxins,trace elements and sensory properties of a high-theabrownins instant Pu-erh tea produced using Aspergillus tubingensis via submerged fermentation

Theabrownins (TB) are polymeric phenolic compounds associated with the multiple bioactivities of Pu-erh tea, a post-fermented Chinese dark tea. High-TB instant Pu-erh tea was produced via a novel submerged fermentation (SF) using Aspergillus tubingensis and compared with samples produced commercially via the conventional solid-state fermentation (SSF). Viable microorganisms and microbial toxins, especially aflatoxins B₁, G₁, B₂, G₂, cyclopiazonic acid, fumonisins B₁, B₂, B₃ and ochratoxin A, were below the detection limit in all samples. Fewer microbial metabolites were found in SF instant tea compared with the SSF teas. Based on an adult consuming 1 g of instant Pu-erh tea daily, the dietary intake of investigated elements was below the safe limits recommended by various authorities. Tasters viewed the instant tea infusions as very mild, smooth, mellow and full. This suggested that submerged fermentation using A. tubingensis offers a speedy and safe alternative to commercial production of instant Pu-erh tea.     

Improving Short-Circuit Current Capacity, Resistance, and Breaking Load of OPGW Constructions by Modifying Aluminium Alloy With AlB2

This article presents a method that can be applied to molten AA-6101 alloy to improve electrical properties of the aluminium part of the optical ground wire (OPGW) used in overhead transmission lines to protect phase conductors from lightning strike and to transmit signals and data. AA-6101 alloy in casting of the log as 6 m length and 178 mm diameter for extrusion has been inoculated by AlB₂ to decrease detrimental effects of Cr, Ti, V, and Zr on the conductivity of the material. After inoculation, improved billets were extruded as 9.5 mm diameter feedstock. Required wires drawn from the feedstock according to the construction types of OPGW to be tested were exposed to aging at 175°C, 6 h (T-8). Upon completion of the back-twist and performing-type stranding process, resistance, and short-circuit current capacity and breaking load of the OPGW 88/44 constructions with other metal combinations have been examined and tested to show improvement. Results are summarized in tables and graphically.     

Anatomical suitability of abdominal aortic aneurysms for endovascular repair

BACKGROUND: Aortic aneurysm anatomy is crucial when considering patients for endovascular repair. The aim of this study was to determine the proportion of patients with aortic aneurysm suitable for endovascular repair with three different graft-stent systems. METHODS: Spiral computed tomographic angiography was used to assess the anatomy of 154 abdominal aortic aneurysms. Measurements were made of aneurysm neck length and diameter, renal artery to aortic bifurcation length, common iliac artery diameter and length, and external iliac artery diameter. Aneurysms were assessed for anatomical suitability for currently available aortoaortic, aortobi-iliac and aortouni-iliac devices. RESULTS: Six patients (4 per cent) had a distal aortic neck suitable for implantation of a straight aortic graft. Fifteen patients (10 per cent) had arterial anatomy suitable for implantation of a bifurcated graft and 85 (55 per cent) patients were suitable for endovascular repair with an aortouni-iliac graft. The primary reasons for unsuitability were: proximal neck length less than 1.5 cm (44 patients), proximal neck diameter greater than 3.0 cm (12), and angulation of the proximal neck (three). A further ten patients were considered unsuitable for an aortouni-iliac graft because of bilateral common iliac artery aneurysms (four), tortuous iliac arteries (four) and narrow external iliac arteries (two). CONCLUSION: The aortouni-iliac device has the widest applicability of the currently available endovascular systems but open repair remains the only option for a large proportion of patients.     

Simulation and experimental analyses of electromagnetic transients behaviors of lightning surge on vertical conductors

Simulation of very fast surge phenomena in a three-dimensional (3-D) structure requires a method based on Maxwell's equations, such as the finite-difference time-domain (FDTD) method or the method of moments, because circuit-equation-based methods cannot handle the phenomena. This paper uses a method of thin-wire representation of the vertical conductor system for the FDTD method which is suitable for the 3-D surge simulation. The thin-wire representation is indispensable to simulate electromagnetic surges on wires or steel frames in which the radius is smaller than a discretized space step used in the FDTD simulation. In this paper, a general surge analysis program named the virtual surge test lab based on the Maxwell's equations formulated by the FDTD method, is used to simulate the surge phenomena of a vertical conductor, including the effects of horizontal wave incidence and vertical wave incidence. Experimental results on the reduced scale model have been presented in order to compare among the simulation results by the FDTD method and the results using numerical electromagnetic code based on the MoM.     

Enhancing electrochromic properties of polypyrrole by silsesquioxane nanocages

A new monomer, octa(thiophenephenyl)silsesquioxane (OThiophenePS) was synthesized via click chemistry. The chemical structure of OThiophenePS was characterized by nuclear magnetic resonance (¹H NMR) and Fourier transform infrared (FT-IR) spectroscopies. Electrochemical polymerization of pyrrole with OThiophenePS was performed resulting in polypyrrole-attached, polyhedral oligomeric silsesquioxane (OPS–PPy). The spectroelectrochemical studies show that the electrochromic properties of (OPS–PPy) are superior to those of polypyrrole (PPy). This great improvement can be attributed to the more accessible doping sites and the facile ion movement during the redox switching brought by the loose packing of the PPy chains.     

Height, occupation and back pain in a national prospective study

Back pain is an important public health problem but there is a paucity of knowledge about risk factors and causal mechanisms. Previous studies have shown that tall men are more at risk of back pain, although observations in women have been less consistent. This paper presents findings from a national longitudinal study of 3262 men and women aged 43 yr. Standing height and sitting height were related to 18-month reported prevalence of 'sciatica, lumbago or severe backache' in both men and women. The paper investigates explanations for these findings using previously collected data on childhood growth and detailed lifetime occupational histories. Neither greater susceptibility of tall men to heavy lifting, nor the timing of growth, were able to account for these relationships. To assess further the association between height and back pain, information is needed on the relationship between stature and characteristics of spinal structure.