Sintering studies of nano-crystalline zinc oxide

Sintering and grain growth of nano-crystalline undoped ZnO has been studied in detail over a wide range of temperature and holding time. Below 800 °C, sintering of over 70% theoretical density is not observed, irrespective of particle size. At 900 °C for 6 h, the nano-crystalline sample sinters to 99% of theoretical density whereas the density for as received sample is 93% of theoretical density. However, at 1300 °C or higher, the densification is found to be much faster and after a few hours becomes independent of holding time. Grain growth studies reveal a similar feature of attaining saturation over holding time. The average saturated grain size is found to be ∼1.5 and ∼2.2 μm at 800 and 900 °C, respectively, while at 1300 °C or higher, it is in between 12 and 13 μm.     

Compact wideband bandpass filter

Designing wideband bandpass filters (BPF) with parallel-coupled microstrip lines requires tight coupling resulting in close separation between the lines and difficulty of fabrication. Here, it is shown that the etched slots in the ground plane of the parallel coupled lines can significantly increase the coupling. This technique has been extended to realize ultra-wideband BPFs having 3-dB fractional bandwidth greater than 100% and low insertion loss in the passband.     

The uptake of fenbendazole by cattle and buffalo following long-term low-level administration in urea-molasses blocks: further studies on block formulations

Fenbendazole (Hoechst India Ltd.) was incorporated at 0.5 g/kg into urea molasses blocks made by two different processes. The proportion of the drug remaining in the blocks and the plasma concentrations of the parent compound and its metabolites were measured. Recovery of the drug in blocks made by the cold and the modified hot processes was 90% and 96%, respectively. The plasma metabolite profile revealed a plateau between days 4 and 6 of feeding in cattle and buffalo. However, the plasma concentrations of fenbendazole and its metabolites were low in buffalo compared to cattle.     

Mössbauer Study of the Influence of Fe-Si-N Liquid in the Synthesis of β-Si3N4 from Silica

Mössbauer spectra of the products obtained by carbothermal reduction and distribution of silica in the presence of iron in the temperatures range 1200^o to 1540^o were studied. The preponderance of β- Si₃N₄ over the α form at a higher reaction temperature were assumed to be related to the formation of an Fe-Si-N liquid. The liquid did not alter its composition with the variation of reduction-temprature, Iron had no effect on the reaction mechanism below 1300^oC.     

Study of polyaniline polyacrylamide composites by positron annihilation technique

Polyaniline doped with nonoxidizing Bronsted acids is recognized as a conducting material, as its electrical conductivity changes with percentage of doping. In the present work, different percentages of doped polyaniline were blended with polyacrylamide and their electrical conductivities as well as the positron annihilation lifetimes were measured. Analysis of data yielded three lifetime components. It was observed that the value of the short lifetime component remained constant for doping concentration, whereas that of the intermediate component τ₂ decreased. The relative intensity pertaining to τ₂, however, increased with the increase in doped PANI concentration. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 930–933, 2003     

Dielectric‐coated conducting curvilinear surface electrostatic model for spacecraft charging applications

In this article, free space capacitance of dielectric‐coated conducting curvilinear surfaces is obtained using method of moments (MOM). The surfaces are discretized using triangular subsections. The curvilinear surfaces are represented by quadratic parametric elements. The MOM based on the pulse basis function and point matching is used. The integrand is divided into a regular and a singular part. The regular part of the integral is numerically evaluated by using the Gaussian quadrature algorithm for triangles. The Duffy transformation is used to evaluate the singular part of the integrals. Computed results are given for the capacitance of the dielectric‐coated conducting cylinder of finite axial length and truncated cone, and compared with the previously published results. © 2010 Wiley Periodicals, Inc. Int J RF and Microwave CAE, 2010.     

33.7 MHz heavy-ion radio frequency quadrupole linac at VECC Kolkata

A 33.7 MHz heavy-ion radio frequency quadrupole (RFQ) linear accelerator has been designed, built, and tested. It is a four-rod-type RFQ designed for acceleration of 1.38 keVu, qA> or =116 ions to about 29 keVu. Transmission efficiencies of about 85% and 80% have been measured for the unanalyzed and analyzed beams, respectively, of oxygen ((16)O(2+), (16)O(3+), (16)O(4+)), nitrogen ((14)N(3+), (14)N(4+)), and argon ((40)Ar(4+)). The system design and measurements along with results of beam acceleration test will be presented.     

Development of an Innovative Bituminized Jute Paving Fabric (BJPF) Along with its Commercial Field Trials for Potential Application in the Field of Geotechnical Construction with an Eye Towards Global Concern

In the last quarter of the twentieth century, a new class of materials, Geosynthetics, emerged prospectively leading significant innovation in the design of geotechnical and geoenvironmental systems. Geotextiles have proven to be among the most versatile and techno-economically viable ground modification materials playing a significant role in modern pavement design and maintenance techniques. With the growing environmental concern across the globe, technologists, researchers have inclined towards the natural geotextile where Jute Geotextile (JGT) is one of the potential candidates. But, JGT has been restricted mainly as underlay in road construction. Hence, there is an urgent need to design and develop a precise innovative fabric as overlay on existing pavements and other emerging civil works to stay technically and economically competitive in the global market. Such a fabric will not only prove techno-economically viable but will also reduce the carbon foot-print generation to a large extent. This paper delineates the development of Grey Jute Paving Fabric (GJPF) followed by its bituminization with suitable type and grade of bitumen to develop Bituminized Jute Paving Fabric (BJPF). The BJPF will enhance the life of the overlay thereby reducing the cost of maintenance as well as serving as a partial substitute of bitumen mastic.     

A Novel Approach for Modeling Mixed Convection Film Boiling for a Vertical Flat Plate

A numerical model is developed to study mixed convection film boiling over a vertical flat plate. The integral form of conservation equations for each phase along with the appropriate interface conditions due to phase change is transformed into ordinary differential equation (ODE)-form. The length scale used in the model is based on Rayleigh–Taylor instability wave at the liquid–vapor interface. The heat transfer associated in the process is assessed and results are validated successfully for different available experimental results for natural convection and mixed convection film boiling. The mixed convection film boiling is characterized in terms of relevant nondimensional parameters for each phase.