Multiphoton Lithography as a Promising Tool for Biomedical Applications

Multiphoton lithography (MPL) is a powerful and useful structuring tool capable of generating 2D and 3D arbitrary micro- and nanometer features of various materials with high spatial resolution down to nm-scale. This technology has received tremendous interest in tissue engineering and medical device manufacturing, due to its ability to print sophisticated structures, which is difficult to achieve through traditional printing methods. Thorough consideration of two-photon photoinitiators (PIs) and photoreactive biomaterials is key to the fabrication of such complex 3D micro- and nanostructures. In the current review, different types of two-photon PIs are discussed for their use in biomedical applications. Next, an overview of biomaterials (both natural and synthetic polymers) along with their crosslinking mechanisms is provided. Finally, biomedical applications exploiting MPL are presented, including photocleaving and photopatterning strategies, biomedical devices, tissue engineering, organoids, organ-on-chip, and photodynamic therapy. This review offers a helicopter view on the use of MPL technology in the biomedical field and defines the necessary considerations toward selection or design of PIs and photoreactive biomaterials to serve a multitude of biomedical applications.     

Dendrochronologically Dated Pine Buildings from Scotland: The SCOT2K Native Pine Dendrochronology Project

The SCOT2K project has extended native pine tree-ring chronology coverage for Scotland to enable reconstruction of past climate and for cultural heritage dating benefits. Using living trees from multiple locations in the Highlands and sub-fossil material from lochs, a network of five regional chronologies has been produced. The project has developed the application of Blue Intensity (BI), a proxy measure for maximum latewood density, which is faster and less costly to obtain than traditional densitometry measurements. The use of both ring-width and BI has been demonstrated to greatly assist historical dendro-dating of pine. This paper presents the dating results for the twenty Scottish pine buildings or sites dendro-dated through the SCOT2K project. They range from the fifteenth to the nineteenth centuries, and from high-status castles to modest cruck cottages. They are mostly located in the Highlands where Scots pine occurs naturally, although an early example of long-distance transport is also identified.     

Assessment of indoor HONO formation mechanisms based on in situ measurements and modeling

The photolysis of HONO has been found to be the oxidation driver through OH formation in the indoor air measurement campaign SURFin, an extensive campaign carried out in July 2012 in a classroom in Marseille. In this study, the INCA‐Indoor model is used to evaluate different HONO formation mechanisms that have been used previously in indoor air quality models. In order to avoid biases in the results due to the uncertainty in rate constants, those parameters were adjusted to fit one representative day of the SURFin campaign. Then, the mechanisms have been tested with the optimized parameters against other experiments carried out during the SURFin campaign. Based on the observations and these findings, we propose a new mechanism incorporating sorption of NO₂ onto surfaces with possible saturation of these surfaces. This mechanism is able to better reproduce the experimental profiles over a large range of conditions.     

Innovative focused ultrasound-based sealing method of flexible packaging films—Principles and characteristics

A key process to package goods is the closure procedure. It ensures the good protection against the environment and vice versa. Ultrasonic sealing presents the advantage of converting locally ultrasound into heat, which is optimal for temperature sensitive goods. The disadvantages remain, however, the equipment cost, the noise generation, and the process sensitivity to materials. It is necessary to develop a sealing process to decrease the acquisition cost of the sealing equipment and cover a wide range of polymer films. This paper focuses on a new sealing method based on high-intensity focused ultrasound. The principles and characteristics of this process are discussed and underpinned with experimental results. Both the acoustic and thermal effects of the sealing process are summarized. A study of the process parameter impact on the seam strength in static and dynamic operating is proposed. Low-density polyethylene films with a carrier layer of bi-oriented polypropylene and polyethylene terephthalate are used. A first test bench generates point-shaped seam. The heat generation is recorded with an infrared thermography system. A second test bench, a horizontal form fill and seal machine, produces longitudinal seams. The seam quality is controlled by tensile test and tightness test. A quick heating of the polymer films is found. Point seams and longitudinal seams are successfully generated. The seams behave similarly to the ones generated with ultrasonic sealing process. However, the sealing velocity is limited to 3 m/min. This work provides a summary of the characteristics and principles of the new sealing method in packaging applications.     

Chemical lipophilization of soy protein isolates and wheat gluten

Chemical modification of soy protein isolate and wheat gluten can be used to investigate the influence of the chemical composition and the structure of the proteins on the final product properties and to adjust these properties to meet specific demands. Proteins were lipophilized by adding different levels of lauroyl chloride to aqueous protein dispersions. At optimum reaction conditions, incorporation rates of lauroyl chains to the protein were 400 and 300 μmol/g proteins for soy protein isolate and wheat gluten, respectively. The study showed that it was possible to lipophilize proteins in an aqueous medium, even with the protein significantly high in concentration.     

Increased remineralization of tooth enamel by milk containing added casein phosphopeptide-amorphous calcium phosphate

Casein phosphopeptide amorphous calcium phosphate nano-complexes (CPP-ACP) in chewing gum, lozenges and mouthrinses have been shown to re-mineralize enamel subsurface lesions in human in situ experiments. The aim of this double-blind, randomized clinical study was to investigate the capacity of CPP-ACP added to bovine milk to re-mineralize enamel subsurface lesions in situ. Ten subjects drank milk containing either 2.0 or 5.0 g CPP-ACP/l or a control milk whilst wearing removable appliances with enamel slabs containing subsurface demineralized lesions. Each 200 ml milk sample was consumed once a day for each weekday over three consecutive weeks. After each treatment and one weeks rest the subjects crossed over to the other treatments. At the completion of the treatments the enamel slabs were removed and remineralization determined using microradiography and microdensitometry. The results demonstrated that all three milk samples re-mineralized enamel subsurface lesions. However, the milk samples containing CPP-ACP produced significantly greater remineralization than the control milk. The re-mineralizing effect of CPP-ACP in milk was dose-dependent with 2.0 and 5.0 g CPP-ACP/l producing an increase in mineral content of 70 and 148%, respectively, relative to the control milk. The differences in remineralization following exposure to the three milk samples were all statistically significant (P<0.001). In conclusion, this study shows that the addition of 2.0-5.0 g CPP-ACP/l to milk substantially increases its ability to re-mineralize enamel subsurface lesions.