Preparation and Characterization of Magnetite–Chitosan Nanoparticles and Evaluation of Their Cytotoxicity Effects on MCF7 and Fibroblast Cells

Nowadays, magnetic nanoparticles play a key role in drug treatment. However, if they are uncoated, they might aggregate and cause embolism in drug delivery. To avoid this, they are generally coated with polymers. In this investigation, magnetic nanoparticles (MNPs) were coated with chitosan through in situ co-precipitation process and their properties in addition to their cytotoxicity in MCF7 and fibroblast cells were analyzed. The results showed MNPs–chitosan nanoparticles would contain an average mean diameter of 32 nm and a saturation magnetization (M _S) value of 38.87 emu/g. To characterize the synthesized nanoparticles in terms of structural, morphological and magnetic properties, Fourier transform infrared (FTIR), X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), thermal gravimetric analysis (TGA) and vibrating sample magnetometry (VSM) studies were used. Toxicity test was also done to investigate whether their presence would cause any toxicity in the body; in addition, antibacterial assay was done to analyze if nanoparticles could be used as an antimicrobial agent.     

Surface characterization and biological properties of regular dentin,demineralized dentin,and deproteinized dentin

Bone autografts are often used for reconstruction of bone defects; however, due to the limitations of autografts, researchers have been in search of bone substitutes. Dentin is of particular interest for this purpose due to high similarity to bone. This in vitro study sought to assess the surface characteristics and biological properties of dentin samples prepared with different treatments. This study was conducted on regular (RD), demineralized (DemD), and deproteinized (DepD) dentin samples. X-ray diffraction and Fourier transform infrared spectroscopy were used for surface characterization. Samples were immersed in simulated body fluid, and their bioactivity was evaluated under a scanning electron microscope. The methyl thiazol tetrazolium assay, scanning electron microscope analysis and quantitative real-time polymerase chain reaction were performed, respectively to assess viability/proliferation, adhesion/morphology and osteoblast differentiation of cultured human dental pulp stem cells on dentin powders. Of the three dentin samples, DepD showed the highest and RD showed the lowest rate of formation and deposition of hydroxyapatite crystals. Although, the difference in superficial apatite was not significant among samples, functional groups on the surface, however, were more distinct on DepD. At four weeks, hydroxyapatite deposits were noted as needle-shaped accumulations on DemD sample and numerous hexagonal HA deposit masses were seen, covering the surface of DepD. The methyl thiazol tetrazolium, scanning electron microscope, and quantitative real-time polymerase chain reaction analyses during the 10-day cell culture on dentin powders showed the highest cell adhesion and viability and rapid differentiation in DepD. Based on the parameters evaluated in this in vitro study, DepD showed high rate of formation/deposition of hydroxyapatite crystals and adhesion/viability/osteogenic differentiation of human dental pulp stem cells, which may support its osteoinductive/osteoconductive potential for bone regeneration.     

Design of a low cross‐talk micro‐coil array for micro‐scale MRI

Design of magnetic resonance micro‐coil arrays with low cross‐talk among the coils can be the main challenge to improve the effectiveness of magnetic resonance micro‐imaging because the electrical cross‐talk which is mainly due to the inductive coupling perturbs the sensitivity profile of the array and causes image artifacts. In this work, a capacitive decoupling network with N(M ? 1) + (N ? 1)(M ? 2) capacitors is proposed to reduce the inductive coupling in an N × M array. A 3 × 3 array of optimized micro‐coils is designed using the finite element simulations and all the needed elements for the array equivalent circuit are extracted in order to evaluate the effectiveness of the proposed decoupling method by assessing the reduction of the coupled signals after employing the capacitive network on the circuit. The achieved results for the designed array show that the high cross‐talk level is reduced by the factor of 2.2–3.4 after employing the capacitive network. By employing this method of decoupling, the adjacent coils in each row and inner columns can be decoupled properly while the minimum decoupling belongs to the outer columns because of the lack of all necessary decoupling capacitances for these columns. The main advantages of the proposed decoupling method are its efficiency and design easiness which facilitates the design of dense arrays with the properly decoupled coils, especially the inner coils which are more coupled due to their neighbors. © 2013 Wiley Periodicals, Inc. Int J Imaging Syst Technol, 23, 353–359, 2013     

Towards the performance evaluation of 4th generation wireless communication standards: LTE versus Mobile WiMAX

Advances in wireless communication protocols and networking toward support of the next generation of mobile and radio broadband technologies have contributed to a strong competition among various telecommunication standards in particular Long Term Evolution (LTE) and Mobile Worldwide Interoperability for Microwave Access (WiMAX). In this paper, we provide an in‐depth comparison analysis of LTE and Mobile WiMAX at the physical (PHY) layer by studying the most similar PHY configuration scenarios for these two technologies. Our study includes a throughput analysis of downlink (DL) and uplink (UL) transmissions in time division duplex with the least overhead possible and different antenna schemes as well as modulation and code rates. This study also performs an overhead analysis in both protocols to provide a more in‐depth understanding of the PHY layer capacity in various PHY layer configurations. Our simulation results generally show higher performance for LTE in both DL and UL transmission with 7 Mbps in DL and 5 Mbps in UL, when using one antenna port. However, by increasing the number of antennas for multiple‐input/multiple‐output configurations, the results illustrate a reduction in the performance of LTE compared to Mobile WiMAX. This arises from the increase in reference signal overhead in LTE from 4.7% in single‐input/single‐output (SISO) to 14.28% in 4 × 4 multiple‐input/multiple‐output (MIMO). Copyright © 2013 John Wiley & Sons, Ltd.     

Inhibitory effect of magnetic iron‐oxide nanoparticles on the pattern of expression of lanosterol 14α ‐demethylase (ERG11) in fluconazole‐resistant colonising isolate of Candida albicans

Fluconazole‐resistant Candida albicans is a big scary reality. The authors assessed the antifungal effects of magnetic iron‐oxide nanoparticles on fluconazole‐resistant colonising isolate of C. albicans and determined the expression of ERG11 gene, protein sequence similarity and ergosterol content. C. albicans isolates were characterised and fluconazole resistance is recognised using World Health Organization''s WHONET software. Susceptibility testing of magnetic iron‐oxide nanoparticles against fluconazole‐resistant colonising isolate of C. albicans was performed according to Clinical and Laboratory Standards Institute guidelines. The expression patterns of ERG11 and protein sequence similarity were investigated. Ergosterol quantification has been used to gauge the antifungal activity of magnetic iron‐oxide nanoparticles. The findings indicated that 93% of C. albicans isolates were resistant to fluconazole. Magnetic iron‐oxide nanoparticles were presented activity against fluconazole‐resistant colonising isolate of C. albicans with minimum inhibitory concentration at 250–500 µg/ml. The expression level of ERG11 gene was downregulated in fluconazole‐resistant colonising isolate of C. albicans. The results revealed no differences in fluconazole‐resistant colonising isolate of C. albicans by comparison with ERG11 reference sequences. Moreover, significant reduction was noted in ergosterol content. The findings shed a novel light on the application of magnetic iron‐oxide nanoparticles in fighting against resistant C. albicans.Inspec keywords: microorganisms, biochemistry, molecular biophysics, antibacterial activity, iron compounds, proteins, cellular biophysics, nanoparticles, drugs, geneticsOther keywords: albicans isolates, magnetic iron‐oxide nanoparticles, fluconazole‐resistant colonising isolate, fluconazole resistance, ERG11, candida albicans, protein sequence similarity, ergosterol content, WHONET, ergosterol quantification, susceptibility testing, antifungal activity, gene expression     

Seismic progressive-failure analysis of tall steel structures under beam-removal scenarios

Investigating progressive collapse of tall structures under beam removal scenarios after earthquake is a complex subject because the earthquake damage acts as an initial condition for the subsequent scenario. An investigation is performed here on a 10 story steel moment resisting structure designed to meet the life safety level of performance when different beam removal scenarios after earthquake are considered. To this end, the structure is first subjected to the design earthquake simulated by Tabas earthquake acceleration. The beam removal scenarios are then considered at different locations assuming that both ends connections of the beam to columns are simultaneously detached from the columns; thus the removed beam falls on the underneath floor with an impact. This imposes considerable loads to the structure leading to a progressive collapse in all the scenarios considered. The results also show that the upper stories are much more vulnerable under such scenarios than the lower stories. Hence, more attention shall be paid to the beam-to-column connections of the upper stories during the process of design and construction.