Clarification of a wheat straw‐derived medium with ion‐exchange resins for xylitol crystallization

BACKGROUND: Xylitol bioproduction from lignocellulosic residues comprises hydrolysis of the hemicellulose, detoxification of the hydrolysate, bioconversion of the xylose, and recovery of xylitol from the fermented hydrolysate. There are relatively few reports on xylitol recovery from fermented media. In the present study, ion‐exchange resins were used to clarify a fermented wheat straw hemicellulosic hydrolysate, which was then vacuum‐concentrated and submitted to cooling in the presence of ethanol for xylitol crystallization. RESULTS: Sequential adsorption into two anion‐exchange resins (A‐860S and A‐500PS) promoted considerable reductions in the content of soluble by‐products (up to 97.5%) and in medium coloration (99.5%). Vacuum concentration led to a dark‐colored viscous solution that inhibited xylitol crystallization. This inhibition could be overcome by mixing the concentrated medium with a commercial xylitol solution. Such a strategy led to xylitol crystals with up to 95.9% purity. The crystallization yield (43.5%) was close to that observed when using commercial xylitol solution (51.4%). CONCLUSION: The experimental data demonstrate the feasibility of using ion‐exchange resins followed by cooling in the presence of ethanol as a strategy to promote the fast recovery and purification of xylitol from hemicellulose‐derived fermentation media. Copyright © 2008 Society of Chemical Industry     

Power moves: Complementarity in dominant and submissive nonverbal behavior.

Two studies examine complementarity (vs. mimicry) of dominant and submissive nonverbal behaviors. In the first study, participants interacted with a confederate who displayed either dominance (through postural expansion) or submission (through postural constriction). On average, participants exposed to a dominant confederate decreased their postural stance, whereas participants exposed to a submissive confederate increased their stance. Further, participants with complementing responses (dominance in response to submission and submission in response to dominance) liked their partner more and were more comfortable than those who mimicked. In the second study, complementarity and mimicry were manipulated, and complementarity resulted in more liking and comfort than mimicry. The findings speak to the likelihood of hierarchical differentiation (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Assimilation for Affiliation and Contrast for Control: Complementary Self-Construals.

People have knowledge about relationships (i.e., relational schemas) that is based on their experiences. Because most people have experience with complementary behavior (interaction partners behaving similarly in terms of affiliation but oppositely in terms of control), they expect complementary behavior in their relationships. Like other beliefs about relationships, expectations of complementarity affect self-construal. The authors provide evidence for complementary self-construal; people assimilate to relevant relationship partners on the affiliation dimension and contrast on the control dimension. Consistent with the proposed role of relationship knowledge in these effects, complementary self-construal was moderated by the familiarity of the target, whether people focused on their relationship with or the appearance of the target, and whether the context was relevant for the interpersonal dimension. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Influence of different process and material parameters on chemical foaming of fluorinated ethylene propylene copolymers

In this article, the chemical foaming of fluorinated ethylene propylene copolymers (FEP) is investigated. For the laboratory scale foam extrusion process, a chemical blowing agent adapted to the high melting temperature of FEP had to be found. Foaming experiments were carried out varying process and material parameters. Foam densities as well as cellular structures were analyzed to characterize how the parameters influence the foaming behavior of the FEP melt. An increasing rate of the foam extrusion caused an augmentation of cell numbers at a simultaneous decrease of their diameters. Moreover, a pronounced reduction of the foam density with increasing output rate could be observed. Changing the temperature of the foam extrusion, an optimum in density reduction and homogeneity of the cell size was found. Furthermore, the influence of an appropriate nucleation agent on the resulting geometry and amount of cells was investigated. Though the chemical blowing agent itself can act as an implement for nucleating cell growth, an addition of 10 wt% of calcium fluoride particles showed a significant augmentation in cell quantity. For the chemical foam extrusion process, three FEP with different viscosities were characterized. With decreasing viscosity, a reduction in foam density could be observed for all temperatures. POLYM. ENG. SCI., 47:1740–1749, 2007. © 2007 Society of Plastics Engineers     

Bi-layer gelatin active films with “Pitanga” leaf hydroethanolic extract and/or natamycin in the second layer

Research on biopolymers-based active films produced with natural antioxidants and/or antimicrobials has gained attention over the last few years; however, anti-mold activity has been less studied than those of anti-bacteria. The aim of this work was the development and characterization of bi-layer films based on gelatin with natamycin and/or “Pitanga” leaf hydroethanolic extract in the second thin layer in order to determine the effects of these bioactive compounds on bi-layered film properties. The films were characterized regarding their moisture content and solubility in water, optical properties, microstructure, mechanical and thermal properties, water contact angle, water vapor permeability, UV/visible light transmission, X-ray diffraction, Fourier transform infrared (FTIR) spectroscopy, and antioxidant and anti-mold activities. Active films presented activity against Penicillium spp and Aspergillus niger and demonstrated antioxidant activity, as measured by ABTS ^•+ and DPPH ^• methods. Neither additive used in the films' second layer significantly affected the films' moisture content, thermal properties or the molecular interactions of the polymer matrix, assessed by FTIR, although some mechanical properties were affected, and the water contact angle. In conclusion, bi-layer films have reduced the quantity of additives required to maintain the antioxidant and anti-mold activities, as compared to similar monolayer films of the same thickness.     

Liquid chromatographic determination of caffeine and adrenergic stimulants in food supplements sold in Brazilian e-commerce for weight loss and physical fitness

Methyl-xanthines and adrenergic stimulants, such as caffeine and synephrine, are commonly added to food supplements due to their stimulating and thermogenic effects. In addition, the abusive consumption of food supplements with ergogenic and aesthetic purposes has been observed worldwide. This work describes the study of caffeine, p-synephrine, hordenine, octopamine, tyramine, ephedrine and salicin as stimulants in dietary supplements marketed in Brazil for weight loss and physical fitness claims. A total of 94 different products were acquired from 30 Brazilian websites. Thus, the sampling of marketed supplements was performed in virtual commerce (e-commerce) with claims of weight loss, appetite reduction, fat burning and metabolism acceleration. The developed analytical method involved the separation of the stimulants by HPLC with diode array detection (HPLC-DAD) by using a gradient elution of flow rate (0.7–2.5 ml min^?1) and mobile phase composition (0.1% H₃PO₄/methanol). The validated method was applied to the study of 46 dietary supplements. Caffeine, p-synephrine and ephedrine were found to be present as stimulants in 52% of the studied samples marketed as encapsulated or bulk forms. Caffeine was found to be present in concentrations that represent doses from 25.0 to 1476.7 mg day^–1. Synephrine was found in concentrations that represent doses from 59.1 to 127.0 mg day^–1. Ephedrine was found to be associated with caffeine in one formulation at a concentration representing a 26.1 mg day^–1 dosage.     

Inertization of Coal Ashes by the Vitrification Technique: A Mixture Design Approach

This article deals with the study of the vitrification mechanism as an inertization method for coal ashes contaminated with heavy metals. Ashes from coal (thermoelectric) and wastes from mining of fluorite and feldspar and from plating were used to compose vitreous systems using a mixture design. The chemical composition of the wastes was determined by XRF and the formulations were melted at 1450°C for 2 h using 10% (mass) of Na₂CO₃ (as a fluxing agent). The glasses were poured into a mold and annealed (600°C). The characteristic temperatures were determined by thermal analysis (DTA, air, 20°C/min) and the mechanical behavior by HV. As a result, the softening temperature is strongly dependent on silica content of each glass, and the fluorite residue, being composed mainly by silica, strongly affects on the glass transition (T_g) and softening (T_s) temperatures. The hardness by micro-indentation of all glasses is mainly affected by the plating (galvanic) residue due to the high iron and zinc content of this waste.