Hemodynamic effects of spinal anesthesia in the elderly: single dose versus titration through a catheter

Protective immunity against infection with Mycobacterium tuberculosis is imparted by T cells rather than antibodies, but B cells can play a role as antigen-presenting cells and in granuloma formation. We re-evaluated the role of B cells in the course of tuberculous infection in mu-chain knock-out (Ig-) mice. Surprisingly, the organs of M. tuberculosis-infected Ig- mice were found to have three- to eight-fold elevated counts of viable bacilli compared with normal littermates at 3-6 weeks post-infection. Splenic interferon-gamma responses to whole antigen were unimpaired, whilst proliferation to certain mycobacterial peptides was found to be diminished. However, bacille Calmette-Guérin (BCG) vaccination significantly reduced the infection in Ig- mice. The mechanisms by which B cells can influence primary tuberculous infection need further study.     

Influence of BaO on Pd/Al2O3-based catalysts in C2H4 and CO oxidation as well as in NO reduction

In this study, Pd/Al₂O₃ and Pd/BaO/Al₂O₃ metallic monoliths were used to investigate the effect of BaO in C₂H₄ and CO oxidation as well as in NO reduction. A FT-IR gas analyser was used to study the activity of the catalysts. Several activity experiments carried out with dissimilar feedstreams revealed that BaO enhances CO and C₂H₄ oxidation as well as NO reduction reactions in rich conditions. This effect is due to BaO, which causes a decrease in the ethene poisoning of palladium. In lean conditions BaO is present in the form of Ba(OH)₂ which reacts with oxidised NO releasing water. Therefore, NO was stored during the lean reaction.     

Influence of OSC material on the behaviour of metallic Pd catalysts in C2H4 and CO oxidation as well as in NO reduction

Topics in Catalysis - The interaction of CO, C2H4, O2, and NO reaction gas compounds over the metallic Pd/Al2O3 and Pd/OSC/Al2O3 monoliths was investigated in order to understand the behaviour of...     

Optimization of the metakaolin geopolymer preparation for maximized ammonium adsorption capacity

Geopolymers are functional materials that can be used in various environmental applications such as adsorbents in pollutant removal from wastewaters. Metakaolin geopolymer (MK-GP) has been proven to be especially suitable for ammonium (NH₄ ⁺) removal. In this research, the optimal reagent and raw material ratios in the preparation of MK-GP in terms of NH₄ ⁺ adsorption capacity were investigated. The response surface methodology based on the face-centered central composite design was used to optimize the levels of three factors: the amounts of hydroxide, silicate, and metakaolin. In addition, the effect of Na or K as the charge-balancing cation was studied. Empirical models were fitted to the experimental data using multiple linear regression. The significance of the models was confirmed by means of analysis of variance. Optimal NH₄ ⁺ removal efficiency was achieved when the amounts of hydroxide and silicate were maximized, the amount of metakaolin was minimized, and Na-based reagents were used. These trends are most likely a result of optimized conversion of metakaolin into MK-GP.     

The use of (green field) biomass pretreatment liquor for fermentative butanol production and the catalytic oxidation of biobutanol

In this study, pretreatment liquor of acid-stored green and yellowish barley silage was used for fermentative acetone–butanol–ethanol (ABE) production. Further, the catalytic oxidation of biobutanol over Pt catalysts was studied to investigate the behaviour of butanol as a fuel in the combustion engine. After the hydrothermal treatment of green and yellowish barley silage followed by enzymatic hydrolysis, approximately 88% and 100% of the available sugars were recovered, respectively. Batch fermentations of pretreatment barley silage liquor, supplemented with gelatinised barley grain, showed good fermentability with total ABE concentrations of 9.0 g/L and 10.9 g/L. Butanol yields of 0.20, 0.17 and ABE yields of 0.28, 0.26 (g/g monosaccharide) were obtained, respectively. In catalytic activity measurements, the conversion of biobutanol became appreciable in the 120–140 °C range, whereas conversions greater than 95% were obtained over 200 °C. Selectivities were also high, although formation of by-products, such as butyraldehyde, was observed.     

Development and application of an automated subcatchment generator for SWMM using open data

An open source subcatchment generator program was developed for the Stormwater Management Model (SWMM) to automate tedious stages in the model construction process. The generator divides the investigated area into subcatchments using a uniform computation grid and connects the grid cells together and to the underlying stormwater network. The system was tested by applying it to two small urban catchments with different fractions of impervious surfaces in Helsinki, Finland, using mostly openly available data. The simulated discharge results were compared to measured data and to results obtained from manually built models. The proposed system significantly accelerated the setup of a SWMM modelling project, as the routing between the subcatchments as well as the subcatchment slopes and flow widths were directly derived from the computation grid. Automatically generated and manually constructed SWMM models produced discharge results that differed only slightly from each other.     

Catalytic Oxidation of Industrial Wastewater Under Mild Conditions

Cerium?Czirconia-supported ruthenium and activated carbon catalysts were used in catalytic wet air (CWAO) and wet peroxide (CWPO) oxidation of industrial wastewater. Both catalysts were active in the removal of TOC and COD from the wastewater. The degree of biodegradation of organic matter increased during CWAO. Therefore, the CWAO process could be considered as a potential pre-treatment process integrated with subsequent biological treatment to achieve the required level of purification of wastewater.     

Comparison between infrared and Raman spectroscopic analysis of maturing rabbit cortical bone

The molecular composition of the organic and inorganic matrices of bone undergoes alterations during maturation. The aim of this study was to compare Fourier transform infrared (FT-IR) and near-infrared (NIR) Raman microspectroscopy techniques for characterization of the composition of growing and developing bone from young to skeletally mature rabbits. Moreover, the specificity and differences of the techniques for determining bone composition were clarified. The humeri of female New Zealand White rabbits, with age range from young to skeletally mature animals (four age groups, n = 7 per group), were studied. Spectral peak areas, intensities, and ratios related to organic and inorganic matrices of bone were analyzed and compared between the age groups and between FT-IR and Raman microspectroscopic techniques. Specifically, the degree of mineralization, type-B carbonate substitution, crystallinity of hydroxyapatite (HA), mineral content, and collagen maturity were examined. Significant changes during maturation were observed in various compositional parameters with one or both techniques. Overall, the compositional parameters calculated from the Raman spectra correlated with analogous parameters calculated from the IR spectra. Collagen cross-linking (XLR), as determined through peak fitting and directly from the IR spectra, were highly correlated. The mineral/matrix ratio in the Raman spectra was evaluated with multiple different peaks representing the organic matrix. The results showed high correlation with each other. After comparison with the bone mineral density (BMD) values from micro-computed tomography (micro-CT) imaging measurements and crystal size from XRD measurements, it is suggested that Raman microspectroscopy is more sensitive than FT-IR microspectroscopy for the inorganic matrix of the bone. In the literature, similar spectroscopic parameters obtained with FT-IR and NIR Raman microspectroscopic techniques are often compared. According to the present results, however, caution is required when performing this kind of comparison.     

Trace element distributions between matte and slag in direct nickel matte smelting

ABSTRACT

Behaviour of trace elements in the nickel matte smelting was studied at 1673 K (1400°C) by equilibration-quenching techniques followed by direct phase analyses using electron probe X-ray microanalysis and laser ablation-inductively coupled plasma-mass spectrometry. The matte-slag samples at silica saturation were equilibrated with SO₂-CO-CO₂-Ar mixtures of fixed p_SO2, p_S2 and p_O2 in order to obtain a pre-determined oxidation degree for the sulphide matte, and thus to generate a targeted iron concentration of the nickel-copper–iron sulphide matte (Ni:Cu = 5, w/w), depending on the slag chemistry. The slag composition was varied from 0 to 2 wt-% K₂O and 0–10 wt-% MgO in silica saturation. The studied trace elements were Co, Ge, Pb, Se and Sn, but also the matte-to-slag distributions of the slag forming fluxing components Mg (MgO) and Si (SiO₂) were determined experimentally. Selenium was the only trace element studied which strongly enriched in the low-iron nickel mattes, and the deportment became larger when the sulphide matte depleted with iron. All the other trace elements behaved in the opposite way.     

Metals in ALS TDP-43 Pathology

Amyotrophic lateral sclerosis (ALS), Alzheimer’s disease, Parkinson’s disease and similar neurodegenerative disorders take their toll on patients, caregivers and society. A common denominator for these disorders is the accumulation of aggregated proteins in nerve cells, yet the triggers for these aggregation processes are currently unknown. In ALS, protein aggregation has been described for the SOD1, C9orf72, FUS and TDP-43 proteins. The latter is a nuclear protein normally binding to both DNA and RNA, contributing to gene expression and mRNA life cycle regulation. TDP-43 seems to have a specific role in ALS pathogenesis, and ubiquitinated and hyperphosphorylated cytoplasmic inclusions of aggregated TDP-43 are present in nerve cells in almost all sporadic ALS cases. ALS pathology appears to include metal imbalances, and environmental metal exposure is a known risk factor in ALS. However, studies on metal-to-TDP-43 interactions are scarce, even though this protein seems to have the capacity to bind to metals. This review discusses the possible role of metals in TDP-43 aggregation, with respect to ALS pathology.