Ni interlayers were introduced prior to dissimilar friction welding of Ti6Al4V base material to three cemented carbide substrates. The fracture strength of Ti6Al4V/(WC-6 wt% Co) welds were poor and were markedly improved when 20-µm thick Ni interlayers were introduced prior to dissimilar friction welding. These results were only produced when the (WC-6 wt% Co) cermet was electroplated prior to friction welding. When the Ti6Al4V alloy was electroplated prior to friction welding, fractured WC particles and cracking were observed in the (WC-Co) carbide substrate. The fracture strengths of Ti6Al4V/(WC-11 wt% Co) and Ti6Al4V/(WC-24 wt% Co) welds were not improved when 20-µm thick Ni interlayers were introduced prior to friction welding. During mechanical testing, the Ni layer retained at the dissimilar joint interface created a region of weakness. 相似文献
In this paper, we present a new methodology for analysis of all-optical fiber-optic code-division multiple-access (FO-CDMA) networks. In this analysis, we propose statistical models, based on photon-counting techniques, for some basic elements of the network, such as splitters, combiners, star couplers, and FO-CDMA passive encoders/decoders. By following the statistical variation of the photon-count of the string of pulses that constitutes the address sequence in an FO-CDMA network, we will be able to reveal the quantum-limited optical signal-to-noise ratio (OSNR) required at the transmitter output to meet the performance limits. Moreover, considering receiver thermal noise and source extinction ratio, we explore the role of using an optical preamplifier before the detector and the dependence of the performance on the transmitted power and the weight of the employed optical orthogonal codes (OOCs). 相似文献
The effect of thermal annealing on the electrical and optical characteristics of ITO films prepared by reactive sputtering and thermal evaporation have been studied. The effect of the thermal annealing is to improve the conductivity and the optical transmission in the shorter wavelength region. The conductivity of the films increases with annealing temperature, this behaviour is associated with grain growth in the film. 相似文献
Vicious codes, especially viruses, as a kind of impressive malware have caused many disasters and continue to exploit more vulnerabilities. These codes are injected inside benign programs in order to abuse their hosts and ease their propagation. The offsets of injected virus codes are unknown and their targets usually are latent until they are executed and activated, what in turn makes viruses very hard to detect. In this paper enriched control flow graph miner, ECFGM in short, is presented to detect infected files corrupted by unknown viruses. ECFGM uses enriched control flow graph model to represent the benign and vicious codes. This model has more information than traditional control flow graph (CFG) by utilizing statistical information of dependent assembly instructions and API calls. To the best of our knowledge, the presented approach in this paper, for the first time, can recognize the offset of infected code of unknown viruses in the victim files. The main contributions of this paper are two folds: first, the presented model is able to detect unknown vicious code using ECFG model with reasonable complexity and desirable accuracy. Second, our approach is resistant against metamorphic viruses which utilize dead code insertion, variable renaming and instruction reordering methods. 相似文献
Most of the commonly used hydrological models do not account for the actual evapotranspiration (ETa) as a key contributor to water loss in semi-arid/arid regions. In this study, the HEC-HMS (Hydrologic Engineering Center Hydrologic Modeling System) model was calibrated, modified, and its performance in simulating runoff resulting from short-duration rainfall events was evaluated. The model modifications included integrating spatially distributed ETa, calculated using the surface energy balance system (SEBS), into the model. Evaluating the model’s performance in simulating runoff showed that the default HEC-HMS model underestimated the runoff with root mean squared error (RMSE) of 0.14 m3/s (R2?=?0.92) while incorporating SEBS ETa into the model reduced RMSE to 0.01 m3/s (R2?=?0.99). The integration of HECHMS and SEBS resulted in smaller and more realistic latent heat flux estimates translated into a lower water loss rate and a higher magnitude of runoff simulated by the HECHMS model. The difference between runoff simulations using the default and modified model translated into an average of 95,000 m3 runoff per rainfall event (equal to seasonal water requirement of ten-hectare winter wheat) that could be planned and triggered for agricultural purposes, flood harvesting, and groundwater recharge in the region. The effect of ETa on the simulated runoff volume is expected to be more pronounced during high evaporative demand periods, longer rainfall events, and larger catchments. The outcome of this study signifies the importance of implementing accurate estimates of evapotranspiration into a hydrological model.
In this paper, a nonlinear model reference adaptive impedance controller is proposed and tested. The controller provides asymptotic tracking of a reference impedance model for the robot end-effector in Cartesian coordinates applicable to rehabilitation robotics or any other human–robot interactions such as haptic systems. The controller uses the parameters of a desired stable reference model which is the target impedance for the robot’s end-effector. It also considers uncertainties in the model parameters of the robot. The asymptotic tracking is proven using Lyapunov stability theorem. Moreover, the adaptation law is proposed in joint space for reducing the complexity of its calculations; however, the controller and the stability proof are all presented in Cartesian coordinates. Using simulations and experiments on a two DOFs robot, the effectiveness of the proposed controller is investigated. 相似文献
The widespread availability of broadband internet access and the growth in server-based processing have provided an opportunity to run games away from the player into the cloud and offer a new promising service known as cloud gaming. The concept of cloud gaming is to render a game in the cloud and stream the resulting game scenes to the player as a video sequence over a broadband connection. To meet the stringent network bandwidth requirements of cloud gaming and support more players, efficient bit rate reduction techniques are needed. In this paper, we introduce the concept of game attention model (GAM), which is basically a game context-based visual attention model, as a means for reducing the bit rate of the streaming video more efficiently. GAM estimates the importance of each macro-block in a game frame from the player’s perspective and allows encoding the less important macro-blocks with lower bit rate. We have evaluated nine game video sequences, covering a wide range of game genre and a spectrum of scene content in terms of details, motion and brightness. Our subjective assessment shows that by integrating this model into the cloud gaming framework, it is possible to decrease the required bit rate by nearly 25 % on average, while maintaining a relatively high user quality of experience. This clearly enables players with limited communication resources to benefit from cloud gaming with acceptable quality. 相似文献
Dynamics of localizable entanglement in a qutrit chain, in the presence of the Dzyaloshinskii–Moriya (DM) interaction is studied. Three distinct initial states, namely, superposition of the ground and the first excited state (SGE), a GHZ state and a superposition of qutrit coherent states (SQCS) are considered in this investigation. While the ground and the first excited state exhibit the maximum of entanglement, the latter is diminished for any superposition of the states. In both SGE and GHZ cases, localizable entanglement (LE) oscillates and its period is a decreasing function of the ratio of the strength of DM interaction and the spin coupling constant (DS ratio), but its maximum value is independent of the latter. In SQCS case, LE also oscillates in time at small values of DS ratio; its average is reduced as the strength of the DM interaction increases and gains its maximum average and the highest peaks at a specific value of the coherence parameter. 相似文献