Temperature-dependent diffusion coefficient of soluble substances during ethanol extraction of clove

The temperature dependence of the diffusion coefficient of ethanol-soluble substances from ground cloves (particle size 250 μm) during extraction was estimated by fitting batch extraction data at several temperatures (27.8, 40, 50, and 60°C) to a previously developed mass transfer model. The model was based on spherical geometry of particles. Nonlinear regression analysis was used to develop an equation that describes the diffusivity as a function of temperature. The temperature dependence ofD _A was of the Arrhenius type.     

Investigation of slider out-of-plane and in-plane vibrations during the track-seeking process

This paper employs the coupled air bearing model and modal order reduction (MOR) model of head stack assembly (HSA) to investigate the track-seeking process of a femto slider. Simulations indicate that the flying height and the pitch angle may increase or decrease significantly, depending on the track-seeking directions. For the slider studied in this paper, it is safer for sweeping from OD to ID, than sweeping from ID to OD. The most serious vibration is the off-track vibration, and it is highly related to the sweeping acceleration profile. A smooth acceleration profile is crucial to reduce all the vibrations of slider, especially the off-track vibration.     

Back heating effect of media hot spot at nanoscale head–disk interface

Microsystem Technologies - Heat-assisted magnetic recording (HAMR) is one of prospective high density recording technologies in current hard disk industry due to its theoretical potential. In this...     

A study on physical and mechanical properties for soft to firm clays in Yangon area – Properties of clays deposit at the sedimentary basins in Myanmar

Recently, a great deal of foreign investment has been entered into construction of the social infrastructure of Myanmar. Many construction projects are therefore on-going, and these are especially planned in the Yangon area. While these construction booms are increasing, existing studies on the geotechnical problems in the Yangon area such as problematic soils like soft clays are limited at present. Information on soil properties has also not been shared and has been confined to individual projects. In this paper, the boring and laboratory tests carried out in the Yangon area are selected and focused upon among the tests carried out in Myanmar. Laboratory test results for clay deposits in the Yangon area are analyzed and the differences in soil properties between different sedimentary basins and sub-areas divided by the Tertiary sediment ridge that runs from north to south at the center of Yangon are clarified together with a comparison to the clays found in other countries, which have been previously investigated.     

Chitosan-Modified Poly(2,6-dimethyl-1,4-phenylene Oxide) for Anion-Exchange Membrane in Fuel Cell Technology

A series of cross-linking chitosan-modified quaternary ammonium poly(2,6-dimethyl-1,4-phenylene oxide)s membranes (CS-QAPPO) were prepared by the Menshutkin reaction. The mechanical property, dimensional stability, and alkaline stability of the CS-QAPPO membrane have been impressively improved by introducing CS into PPO backbone. Even the hydroxide conductivity of CS-QAPPO membranes is higher than that of the pristine QAPPO membrane. The 20% chitosan-modified QAPPO membrane shows the best performance, and the hydroxide conductivity is 32 mS cm^?1 at 90°C. The alkaline stability measurements demonstrated excellent chemical stability of the CS-QAPPO membrane in 2?M NaOH solution at room temperature after 2,000?h.     

Modeling laser heated thin film media for heat assisted magnetic recording

In the present study, we concern laser induced heat generation and its effect on lubricant depletion on the multilayer disk structure. A mathematical model is applied to explore the local laser heating from the point of view of the interaction between the disk media and the electromagnetic wave. The absorption rate of optical energy in each layer of disk structure is derived from the Maxwell equations, which is incorporated into the energy equation by a source term. We simulate the unsteady heat transfer and lubricant depletion processes on a multilayer disk structure. The effect of multi-cycle heating on the lubricant depletion is investigated. Comparison between the present results and those obtained by applying a heat flux boundary condition is also made. The present simulations provide useful information on the media structure design of hard disk drives in heat assisted magnetic recording.     

Modelling land‐cover types using multiple endmember spectral mixture analysis in a desert city

Spectral mixture analysis is probably the most commonly used approach among sub‐pixel analysis techniques. This method models pixel spectra as a linear combination of spectral signatures from two or more ground components. However, spectral mixture analysis does not account for the absence of one of the surface features or spectral variation within pure materials since it utilizes an invariable set of surface features. Multiple endmember spectral mixture analysis (MESMA), which addresses these issues by allowing endmembers to vary on a per pixel basis, was employed in this study to model Landsat ETM+ reflectance in the Phoenix metropolitan area. Image endmember spectra of vegetation, soils, and impervious surfaces were collected with the use of a fine resolution Quickbird image and the pixel purity index. This study employed 204 (3×17×4) total four‐endmember models for the urban subset and 96 (6×6×2×4) total five‐endmember models for the non‐urban subset to identify fractions of soil, impervious surface, vegetation and shade. The Pearson correlation between the fraction outputs from MESMA and reference data from Quickbird 60 cm resolution data for soil, impervious, and vegetation were 0.8030, 0.8632, and 0.8496 respectively. Results from this study suggest that the MESMA approach is effective in mapping urban land covers in desert cities at sub‐pixel level.