全流程低功耗设计技术的应用

随着便携式电子设备的日益使用,要求集成电路IC及SoC的功耗越来越低。在今后日益复杂的设计中,实现一个可靠的电源网络以减小功耗变成了主要的挑战。对于使用者来说,期待每一代新产品都具有新型功能,同时也希望产品的体积小并具有较长的工作时间。解决这个难题的方法之一就是采用新型的IC设计技术,以提供小而且高效的晶体管。在整个设计流程中,为了使器件的性能和可靠性最优,电源方面的限制非常关键。例如在逻辑门应用中,由于开关从一种状态转换到另一种状态从而引起动态功耗。在开关的转换过程中,和晶体管门极相连的所有内部电容将会被…     

Analysis of supersaturation and nucleation in a moving solution droplet with flowing supercritical carbon dioxide

A supercritical antisolvent (SAS) process is employed for production of solid nanoparticles from atomized droplets of dilute solution in a flowing supercritical carbon dioxide (SC CO₂) stream by attaining extremely high, very rapid, and uniform supersaturation. This is facilitated by a two‐way mass transfer of CO₂ and solvent, to and from the droplet respectively, rendering rapid reduction in equilibrium solubility of the solid solute in the ternary solution. The present work analyses the degree of supersaturation and nucleation kinetics in a single droplet of cholesterol solution in acetone during its flight in a flowing SC CO₂ stream. Both temperature and composition are assumed to be uniform within the droplet, and their variations with time are calculated by balancing the heat and mass transfer fluxes to and from the droplet. The equilibrium solubility of cholesterol with CO₂ dissolution has been predicted as being directly proportional to the Partial Molar Volume Fraction (PMVF) of acetone in the binary (CO₂–acetone) system. The degree of supersaturation has been simulated up to the time required to attain almost zero cholesterol solubility in the droplet for evaluating the rate of nucleation and the size of the stable critical nuclei formed. The effects of process parameters have been analysed in the pressure range of 7.1–35.0 MPa, temperature range of 313–333 K, SC CO₂ flow rate of 0.1136–1.136 mol s^?1, the ratio of the volumetric flow rates of CO₂‐to‐solution in the range of 100–1000, and the initial mole fraction of cholesterol in acetone solution in the range of 0.0025–0.010. The results confirm an extremely high and rapid increase in degree of supersaturation, very high nucleation rates and stable critical nucleus diameter of the order of a nanometre. Copyright © 2005 Society of Chemical Industry     

建立基于模型设计文化的最佳策略

本文引入了基于模型设计的概念,突出了其中的一些优点,详细讨论了组织中采用基于模型设计文化的10个最佳策略。这些最佳策略从不同工业领域的公司中收集,包括向基于模型设计的成功或者不成功的过渡。     

Urban water demand,climatic variation,and irrigation-water insecurity: interactive stressors and lessons for water governance from the Angat River basin (Philippines)

Climatic variation and intersectoral water competition increasingly challenge the effective provision of irrigation services. This article explores their combined effects on irrigation allocation from the Angat Reservoir (Philippines), where domestic water use in Metro Manila has overtaken regional irrigation as the dominant right-holder. Rules protecting Metro Manila’s large right to water ‘interact’ with dry spells to affect irrigation security in wet and dry seasons. Historically, irrigators were uncompensated because re-allocation’s cause was contested as (1) an unforeseeable climatic event (releasing domestic utilities of liability), or (2) produced by urban demand (requiring compensation). Trade-off rules must be prepared to navigate combinatory effects.     

Thermoplastic olefin/clay nanocomposites: Morphology and mechanical properties

Thermoplastic olefin (TPO)/clay nanocomposites were made with clay loadings of 0.6–6.7 wt %. The morphology of these TPO/clay nanocomposites was investigated with atomic force microscopy, transmission electron microscopy (TEM), and X‐ray diffraction. The ethylene–propylene rubber (EPR) particle morphology in the TPO underwent progressive particle breakup and decreased in particle size as the clay loading increased from 0.6 to 5.6 wt %. TEM micrographs showed that the clay platelets preferentially segregated to the rubber–particle interface. The breakup of the EPR particles was suspected to be due to the increasing melt viscosity observed as the clay loading increased or to the accompanying chemical modifiers of the clay, acting as interfacial agents and reducing the interfacial tension with a concomitant reduction in the particle size. The flexural modulus of the injection moldings increased monotonically as the clay loading increased. The unnotched (Izod) impact strength was substantially increased or maintained, whereas the notched (Izod) impact strength decreased modestly as the clay loading increased. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 928–936, 2004     

Simple Robust PID Tuning for Magnetic Levitation Systems Using Model-free Control and $${{\cal H}_\infty}$$ ℋ ∞ Control Strategies

International Journal of Control, Automation and Systems - This paper proposes two control techniques to provide robust tracking for magnetic levitation systems (MLS): model-free control (MFC) and...     

Flexible amorphous‐silicon non‐volatile memory

Abstract— The development of a flexible, rewritable, non‐volatile memory (NVM) that is implemented on a standard, low‐temperature a‐Si:H process without additional mask steps is reported. This NVM is a part of a flexible‐display system. Each NVM cell is composed of differentially configured thin‐film‐transistors (TFTs). The cell reads out one of two stable states depending on the relative threshold voltages of the differentially configured TFTs. Information is stored in each cell by increasing the threshold voltage of one differential TFT or the other, utilizing the well‐known electrical‐stress degradation intrinsic to a‐Si:H TFTs. The stored information is retained indefinitely with no applied power. A test array of individually addressable NVM cells has been successfully fabricated and tested on flexible stainless‐steel substrates. Read and write operation, as well as preliminary reliability measurements, are described. The design is readily scalable to large memory arrays.     

Compact modeling of amorphous‐silicon thin‐film transistors with BSIM3

Abstract— A novel approach of modeling a‐Si:H TFTs with the industry‐standard BSIM3 compact model is presented. The described approach defines the a‐Si:H TFT drain current and terminal charges as explicit functions of terminal voltages using a minimum set of BSIM3 parameters. The set of BSIM3 parameters is chosen based on the electrical and physical characteristics of the a‐Si:H TFT and their values extracted from measured data. By using the selected BSIM3 model parameters, the a‐Si:H TFT is simulated inside SPICE to fit the simulated I‐V and C‐V curves with the measured results. Finally, the extracted BSIM3 model is validated by simulating the kickback voltage effect in an AMLCD pixel array.