A method for system identification using the optimality criteria optimization approach

An algorithm similar to the optimality criteria approach used in structural optimization is presented for identifying stiffnesses of structural members by using vibration test data. A set of equivalent static inertia forces are obtained from the vibration analysis using d'Alembert's principle and are used to solve the multiple displacement constraint problem. The displacement constraint values are specified based on the measured experimental modal displacement data at critical locations. The algorithm is used to find the changes needed in the stiffnesses of the elements and the distribution of nonstructural mass of the nominal analytical model to correlate the analytical and experimental data. The algorithm alternates between the vibration analysis and static analysis to find the equivalent load vector and modify the stiffnesses. The identified stiffness properties of the structural elements can be used to control and study the dynamic response of the structure.     

Multicriteria Optimization for Design of Structures with Active Control

This paper describes a method to design a structure and control system simultaneously using a multiobjective optimization approach based on global criteria. The control system was based on a modified linear quadratic regulator (LQR) with bounds placed on the control forces to simulate limitations of real actuators. In the design of the control system, the state space equations were integrated using a Runge-Kutta method for a specified initial boundary condition. The structural weight, the weight of the actuators, the time required to suppress an initial disturbance, and the performance index were considered as different objective functions to be optimized. The design variables were the bounds on the maximum values of the control force, the cross-sectional areas of the structural elements, and elements of the weighting matrices in the control design. As an example to illustrate the application of the approach, a box beam idealized by rod elements was used. The actuators and sensors were collocated and assumed to be embedded in structural elements. The results are presented for optimum designs obtained by changing different parameters in the definition of the global criteria.     

Effect of NOx on AgI formation in Ag-mordenite

Ag loaded mordenite can be used as a trap for radio-iodine arising from nuclear reprocessing operations. Typically, iodine is trapped in the Ag loaded mordenite by the formation of AgI in the pores of the mordenite, through a solid-vapour reaction. In the presence of NO_x and water vapour, AgI is most likely formed by liquid-vapour reaction between AgNO₃ and I₂. This reaction results in the formation of large aggregates of AgI crystals on the surface of the mordenite, also leading to a yellow colouration of the mordenite, which is not observed when NO_x and water vapour is absent.     

Novel synthesis of interconnected nanocubic PbS thin films by facile aqueous chemical route

In the present investigation, we have successfully synthesized lead sulfide (PbS) thin films by using simple, cost effective and facile aqueous chemical route. The effect of deposition time on optical, structural and morphological properties of PbS thin films were investigated by using UV–Vis–NIR absorption spectroscopy, X-ray diffraction (XRD), photoluminescence, field emission scanning electron microscopy (FESEM), high-resolution-transmission electron microscopy (HRTEM), energy dispersive X-ray spectroscopy (EDS) and X-ray photoelectron spectroscopy (XPS). The optical band gap energy was varied in the range of 0.96–1.56 eV. The XRD patterns revealed the formation of pure cubic crystal structure. FESEM micrographs demonstrated the conversion of morphology from pyramidal to interconnected nanocubic. HRTEM and selected area electron diffraction (SAED) pattern illustrated that nanoparticles are compact, well interconnected and single crystalline in nature. EDS spectrum confirms that deposited PbS thin films are in good stoichiometry.     

Structure/control optimization to improve the dynamic response of space structures

An integrated structural/control optimum design algorithm is presented. The algorithm can be used to modify the structural design variables to improve the dynamic response of a space structure with constraints on the damping parameters and the frequency distribution of the closed-loop system. The method used a nonlinear mathematical programming approach to obtain a structure with minimum weight that satisfies all the constraints. Application of the algorithm is illustrated by designing a truss structure.     

Multilevel resistive switching and synaptic plasticity of nanoparticulated cobaltite oxide memristive device

Multilevel resistive switching(RS)is a key property to embrace the full potential of memristive devices for non-volatile memory and neuromorphic computing applications.In this study,we employed nanopar-ticulated cobaltite oxide(Co3O4)as a model material to demonstrate the multilevel RS and synaptic learning capabilities because of its multiple and stable redox state properties.The Pt/Co3O4/Pt memris-tive device exhibited tunable RS properties with respect to different voltages and compliance currents(CC)without the electroforming process.That is,the device showed voltage-dependent RS at a higher CC whereas CC-dependent RS was observed at lower CC.The device showed four different resistance states during endurance and retention measurements and non-volatile memory results indicated that the CC-based measurement had less variation.Besides,we investigated the basic and complex synap-tic plasticity properties using the analog current-voltage characteristics of the Pt/Co3O4/Pt device.In particular,we mimicked the potentiation-depression and four-spike time-dependent plasticity(STDP)rules such as asymmetric Hebbian,asymmetric anti-Hebbian,symmetric Hebbian,and symmetric anti-Hebbian learning rules.The results of the present work indicate that the cobaltite oxide is an excellent nanomaterial for both multilevel RS and neuromorphic computing applications.     

Development of Impregnated Agglomerate Pelletization (IAP) process for fabrication of (Th,U)O2 mixed oxide pellets

Impregnated Agglomerate Pelletization (IAP) technique has been developed at Advanced Fuel Fabrication Facility (AFFF), BARC, Tarapur, for manufacturing (Th,²³³U)O₂ mixed oxide fuel pellets, which are remotely fabricated in hot cell or shielded glove box facilities to reduce man-rem problem associated with ²³²U daughter radionuclides. This technique is being investigated to fabricate the fuel for Indian Advanced Heavy Water Reactor (AHWR). In the IAP process, ThO₂ is converted to free flowing spheroids by powder extrusion route in an unshielded facility which are then coated with uranyl nitrate solution in a shielded facility. The dried coated agglomerate is finally compacted and then sintered in oxidizing/reducing atmosphere to obtain high density (Th,U)O₂ pellets. In this study, fabrication of (Th,U)O₂ mixed oxide pellets containing 3–5 wt.% UO₂ was carried out by IAP process. The pellets obtained were characterized using optical microscopy, XRD and alpha autoradiography. The results obtained were compared with the results for the pellets fabricated by other routes such as Coated Agglomerate Pelletization (CAP) and Powder Oxide Pelletization (POP) route.     

Development of De-NOx selective catalytic reduction catalyst using V2O5 –TiO2 supported on a ceramic filter candle

This study reports the development of a V₂O₅-TiO₂-based selective catalytic reduction (SCR) catalyst supported on alumina-silicate water filter candles for NO_x abatement. The synthesised catalysts have been characterised by thermogravimetry/differential scanning calorimetry, X-ray diffraction, scanning electron microscope and measurement of NO_x removal performance. The catalyst synthesised under optimal conditions shows NO_x reduction efficiency of >97%. SCR performance has been augmented using O₂ as a carrier gas. This simple, reproducible procedure can have wide applications in NOx abatement.     

Surface activation of perfluorosulfonic acid membrane used in fuel cells with vacuum UV photo-oxidation

Perfluorosulfonic acid membrane (Nafion-117) was surface activated with low-pressure vacuum UV photo-oxidation downstream from Ar microwave plasma. X-ray photoelectron spectroscopy detected defluorination and incorporation of oxygen into the modified Nafion surface. An in-depth chemical state analysis for the C 1s, O 1s and S 2p spectra is reported.     

Random phase and time of arrival statistics for circular disk scattering model

Wireless Networks - Fading simulators are tested by verifying the statistics of channel created by multipath environment. These statistics are an angle of arrival (AoA), time of arrival (ToA), and...