Performance of insulated FRP-strengthened concrete flexural members under fire conditions

This paper presents the results of fire resistance tests on carbon fiber-reinforced polymer (CFRP) strengthened concrete flexural members, i.e., T-beams and slabs. The strengthened members were protected with fire insulation and tested under the combined effects of thermal and structural loading. The variables considered in the tests include the applied load level, extent of strengthening, and thickness of the fire insulation applied to the beams and slabs. Furthermore, a previously developed numerical model was validated against the data generated from the fire tests; subsequently, it was utilized to undertake a case study. Results from fire tests and numerical studies indicate that owing to the protection provided by the fire insulation, the insulated CFRP-strengthened beams and slabs can withstand four and three hours of standard fire exposure, respectively, under service load conditions. The insulation layer impedes the temperature rise in the member; therefore, the CFRP–concrete composite action remains active for a longer duration and the steel reinforcement temperature remains below 400°C, which in turn enhances the capacity of the beams and slabs.     

Statistical synchronization among participants in real-time multimedia conferencing

In this paper, an algorithm to determine the set of packets generated continuously and periodically from different participants that are arriving at a node either for mixing at the master of a conference, or for simply playing back at a regular participant of a conference, is proposed. The essence of the algorithm is to estimate the expected packet arrival time (or reference time) for each participant. With the reference time at hand, the maximum jitter and the optimum waiting time for a mixer to wait packets from all participants can be determined. An enhancement to improve synchronization which deals with the estimation of the time offsets between the individual periods of the sources and the period of the receiver is also presented. The error of the proposed algorithm is enumerated by the Chernoff bound and demonstrated by simulation and is shown to be acceptable in practical application. The algorithm can also be employed when traffic sources operate with different periods.     

A modified flow enforcement technique for ATM networks

In ATM networks the requirement of providing the negotiated Quality of Service (QOS) needs an efficient flow enforcement technique that will result in preventive congestion control. A very effective technique is the Exponentially Weighted Moving Average (EWMA) method. In this paper, we have suggested improvements to the EWMA and call it the Enhanced EWMA (EEWMA). Simulation results show that the EEWMA is consistently better than the EWMA in most of the situations. We present comparisons of cell loss under various conditions. No theoretical analysis is presented.     

Novel thermally and mechanically stable hydrogel for enzyme immobilization of penicillin G acylase via covalent technique

κ‐Carrageenan hydrogel crosslinked with protonated polyethyleneimine (PEI⁺) and glutaraldehyde (GA) was prepared and evaluated as a novel biocatalytic support for covalent immobilization of penicillin G acylase (PGA). The method of modification of the carrageenan biopolymer is clearly illustrated using a schematic diagram and was verified by FTIR, elemental analysis, DSC, and INSTRON using the compression mode. Results showed that the gels' mechanical strength was greatly enhanced from 3.9 kg/cm² to 16.8 kg/cm² with an outstanding improvement in the gels thermal stability. It was proven that, the control gels were completely dissolved at 35°C, whereas the modified gels remained intact at 90°C. The DSC thermogram revealed a shift in the endothermic band of water from 62 to 93°C showing more gel‐crosslinking. FTIR revealed the presence of the new functionality, aldehydic carbonyl group, at 1710 cm^?1 for covalent PGA immobilization. PGA was successfully immobilized as a model industrial enzyme retaining 71% of its activity. The enzyme loading increased from 2.2 U/g (control gel) to 10 U/g using the covalent technique. The operational stability showed no loss of activity after 20 cycles. The present support could be a good candidate for the immobilization of industrial enzymes rich in amino groups, especially the thermophilic ones. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

High-performance polymer alloys of polybenzoxazine and bismaleimide

Two series of high-performance polymer alloys were prepared by mixing typical benzoxine monomers, 3-phenyl-3,4-dihydro-2H-1,3-benzoxazine (P-a) or 6,6-(1-methylethyliden)-bis-(3,4-dihydro-3-phenyl-2H-1,3-benzoxazine) (B-a), with a typical bismaleimide, 4,4-bismaleimidodiphenyl methane by various ratios followed by thermal treatment up to 240 °C. DSC and IR of the alloys were examined to follow the curing reaction. These analyses showed that the obtained polymer alloys are AB co-cross-linked polymer networks through the formation of ether linkage between the hydroxyl group of polybenoxazine and the double bond of bismaleimide. Viscoelastic analysis and softening temperature measurement revealed that the polymer alloys have much higher glass transition temperatures than those of each homopolymer. The thermal stability also increased with the increase of bismaleimide content as evidenced by TGA.     

A sensing strategy for the reverse engineering of machined parts

The reverse engineering of machined parts requires sensing an existing part and producing a design (and perhaps a manufacturing process) for it. We have developed a reverse engineering system that has proven effective with a set of machined parts. This paper describes the system, presents some results, and discusses strategy for a new system.This work was supported by ARPA under ARO grant number DAAH04-93-G-0420, DARPA grant N00014-91-J-4123, NSF grant CDA 9024721, and a University of Utah Research Committee grant. All opinions, findings, conclusions or recommendations expressed in this document are those of the authors and do not necessarily reflect the views of the sponsoring agencies.     

Multilayered substrate integrated waveguide 4 × 4 butler matrix

In this article, a multilayered substrate integrated waveguide (SIW) Butler matrix beam‐forming network is proposed, designed, and demonstrated at 24 GHz for automotive radar system applications. The proposed low‐cost SIW structure can be used to develop a highly integrated multibeam antenna platform in automotive radar systems and other applications. In this structure, an SIW H‐plane coupler is optimized with an H‐plane slit to provide the required phase shift. A class of SIW E‐plane 3‐dB couplers in doubled layer substrate are studied and designed as the fundamental building blocks to avoid crossovers usually required in the construction of a Butler matrix. A 4 × 4 matrix is investigated and designed, which shows excellent performance over 22–26 GHz frequency band. Two types of antenna are tested with the proposed matrix scheme. First, an antipodal linearly tapered slot antenna (ALTSA) is incorporated into the Butler matrix to verify the broadband performances. Second, a longitudinal slotted waveguide antenna array is examined to generate radiation patterns in the broadside direction. Measured results agree well with simulated counterparts, thus validating the proposed multilayer SIW design concepts. In the next sections, the use as feeding networks for providing the reconfigurability operation of an antenna will be illustrated. © 2012 Wiley Periodicals, Inc. Int J RF and Microwave CAE , 2012.     

An accelerated algorithm for full band electron–phonon scattering rate computation

Computing scattering rates of electrons and phonons stands at the core of studies of electron transport properties. In the high field regime, the interactions between all electron bands with all phonon bands need to be considered. This full band interaction implies a huge computational burden in calculating scattering rates. In this study, a new accelerated algorithm is presented for this task, which speeds up the computation by two orders of magnitude (100 times) and dramatically simplifies the coding. At the same time, it visually demonstrates the physical process of scattering more clearly.