托盘式湿法烟气脱硫塔阻力特性研究

采用冷态物理模型结合商用CFD(Computational Fluid Dynamics)软件,对山东某火电厂300 MW机组配套托盘塔的流场和阻力特性进行了研究,取得了孔板阻力损失与液气比之间的二次函数关系。研究结果表明,塔内两相流场分布合理,入口处液滴受烟气的拖拽作用形成明显的干湿界面,负荷和液气比是影响脱硫塔阻力的重要因素。当液气比一定时,托盘上方能够维持相对稳定的持液层及鼓泡过程;满负荷运行时,脱硫塔阻力损失约为1600 Pa,其中孔板占1/4,持液层占3/4。拟合获得了托盘区阻力损失同液气比之间的关系,为托盘塔的应用、运行及优化提供了理论指导。     

运输机皮带撕裂原因分析及特征实验研究

带式运输机是重要的连续性运输设备，皮带撕裂是造成带式运输机运输失效的重要因素。详细分析了引起皮带撕裂的常见原因，并给出了合理的预防措施。针对皮带撕裂现象构建皮带撕裂实验平台，并通过皮带受力应变实验分析掌握了皮带撕裂的特征，为预防皮带撕裂的发生提供了一定的理论依据。     

有关地下公共娱乐场所防排烟设计的探讨

根据地下公共娱乐场所的结构特点和火灾特点,结合某地下娱乐场所的防排烟设计,探讨如何进行防排烟设计。     

硫掺杂ZnFe2O4/蒙脱石复合材料的铀酰吸附研究

为获得铀酰(UO2²⁺)吸附性能高的吸附剂,以蒙脱石(Montmorillonite,MMT)和铁酸盐(ZnFe₂O₄)为原材料与L-半胱氨酸通过水热反应制备了硫掺杂ZnFe₂O₄(S-ZnFe₂O₄)和ZnFe₂O₄/MMT(S-ZnFe₂O₄/MMT),采用XRD、FTIR和SEM对S-ZnFe₂O₄和S-ZnFe₂O₄/MMT进行了结构表征,研究了pH、接触时间和UO2²⁺初始质量浓度对UO2²⁺吸附效果的影响,结果表明:S-ZnFe₂O₄呈高分散的纳米颗粒状,并且均匀分布于蒙脱石片层结构表面;S-ZnFe₂O₄与蒙脱石复合后能明显提高其UO2²⁺吸附性能,最佳吸附pH为6.0;S-ZnFe₂O₄和S-ZnFe₂O₄/MMT复合材料对UO2²⁺的最大吸附量分别为51.44 mg/g和68.45 mg/g;吸附符合Langmuir等温吸附模型和伪二阶动力学模型,说明吸附过程属于表面单分子层化学吸附。     

钢水成分大屏幕在线更新系统

为满足操作者的操作需求,在炼钢转炉操作平台现场安装大屏幕,在线更新钢水成分数据,进一步提高了操作的及时性和有效性,从而提高炼钢钢水的品质。     

水温差及热负荷在线检测技术在包钢高炉上的应用

简介了水温差及热负荷在线检测系统功能、系统组成和特点,以及如何利用它分析、判断、执行高炉冷却制度,该系统还可用于预测煤气流的分布和冷却壁的漏水情况.     

核电大型件90o/180o翻转机最佳翻转工艺研究

为研究核电大型件翻转机的最佳翻转工艺,并进行自身可靠性分析,基于参与研制的某重型机械集团公司核电大型件翻转机,应用理论解析法,兼顾生产效率与设备安全因素,推导了设备翻转不同类型工件时翻转机关键工位的最佳旋转角度。该结果对制定不同类型工件最佳翻转工艺,保证设备安全、高效运行具有重要意义。     

Robust synchronization of uncertain complex systems with time-varying delays

Synchronization analysis and design problems for uncertain time-delayed high-order complex systems with dynamic output feedback synchronization protocols are investigated. By stating projection on the synchronization subspace and the complement synchronization subspace, synchronization problems are transformed into simultaneous stabilization problems of multiple subsystems related to eigenvalues of the Laplacian matrix of the interaction topology of a complex system. In terms of linear matrix inequalities(LMIs), sufficient conditions for robust synchronization are presented, which include only five LMI constraints.By the changing variable method, sufficient conditions for robust synchronization in terms of LMIs and matrix equalities are given,which can be checked by the cone complementarily linearization approach. The effectiveness of theoretical results is shown by numerical examples.     

Water vapor adsorption in activated carbon modified with hydrophilic organic salts

Five different kinds of hydrophilic organic salts were used to modify commercial activated carbon in order to prepare hydrophilic carbon materials. Properties of the samples were analyzed by surface area analyzer and SEM-EDX. The hydrophilic organic salts with different properties were introduced into activated carbon and significantly affected the properties of the samples.During adsorption experiments, the water vapor adsorption amount in modified samples increases by 0.57-17.12 times in temperature range from 303 to 323 K and at relative pressure below 0.50. Water molecules combined with surface hydrophilic groups through H-bonding exhibit good thermo stability. The effects of temperature, oxygen content and properties of the hydrophilic organic salts on water vapor adsorption were studied. It is indicated that water vapor adsorption in modified samples is mainly affected by the surface oxygen content. The carboxylate radicals in the hydrophilic organic salts greatly affect the micropore structure of the modified samples, while the metal ions in them exhibit limited influence. Different adsorption capacity of modified samples can be explained with the electronegativity of elements presented by Pauling.