排序方式: 共有10条查询结果,搜索用时 15 毫秒
1
1.
2.
通过溶胶-凝胶的方法在室温下制备出结晶度较好的钒硅中孔分子筛V-MCM-4l,并以苯乙烯的液固相催化氧化反应作为指针反应,研究了制备条件影响V-MCM-4l催化氧化性能的本质。在催化剂制备的前处理阶段,降低Si/V比直至Si/V=50(mol比),并将合成凝胶的pH值控制在11.5左右时能获得较高的催化活性,同时也不会降低催化剂的循环使用寿命。另外,碱源用氢氧化钠比用四甲基氢氧化胺更能提高催化剂活性。在催化剂制备的后处理阶段,晶化时间,晶化温度和焙烧温度对于提高催化剂的活性都有一个最佳值,其最佳值分别为4d,100℃和650℃。研究结果表明,V在分子筛骨架的搀杂量以及分子筛的结晶度是制备条件影响钒硅中孔分子筛催化氧化性能的重要决定因素。 相似文献
3.
介孔分子筛MSU-X合成条件对结构及热稳定性影响的XRD研究 总被引:2,自引:0,他引:2
以十八烷基聚氧乙烯醚(C18EO10)为模板剂,以正硅酸乙酯(TEOS)和硅酸钠分别为硅源,研究了不同pH值、反应温度、反应时间、原料比等条件下,合成的全硅MSU-X型介孔分子筛产物的结构变化规律,并通过焙烧和水热处理,考察了MSU-X介孔材料的结构稳定性.实验采用粉末多晶X射线衍射技术,分析了合成条件对MSU-X介孔分子筛结构和稳定性的影响.结果表明:以正硅酸乙酯为硅源,原料摩尔比为TEOS:C18EO10:H2O=1:0.225:150,凝胶pH值为2,晶化温度为55℃,晶化时间48 h,相应的MSU-X材料具有较好的热稳定性和水热稳定性.相比之下,以硅酸钠为硅源得到的MSU-X材料,具有更高的短程有序度,孔壁厚、孔径小,稳定性优于以正硅酸乙酯为硅源合成的MSU-X产物,经900℃焙烧2 h或760℃水蒸气处理7 h后仍保持其孔道结构. 相似文献
4.
5.
Evolution of microstructures of alloy MINi3.75 Co0. 75 Mn0. 3 Al0.2 ( MI--La-rich mischmetal) during the electrochemical hydriding-dehydriding process was studied by using in-situ X-ray diffraction method. It is indicated that both the crystallite sizes of a phase (solid solution phase) and β phase (hydride phase) decrease with the hydrogen content increasing during this process, β phase is found to be composed of the plate-like and the needle-like crystallites, while the crystallite size of the former changes more rapidly than that of the later during the hydridingdehydriding process. It‘s also clearly found that strains along (110) plane and (001) plane of α phase and β phase are higher in the α β region than those in the corresponding single phase region. Based on the microstructural studies,mechanism for the hydride growth has also been proposed. 相似文献
6.
由于国内建筑市场竞争的加剧,作为买方市场的业主对市场的要求和期望越来越高,这就迫使施工企业更多的关注和适应业主的需求变化,不断更新经营观念,提高项目管理水平,因此项目经理是项目成功的最关键因素之一,本文就项目管理中的作用展开论述. 相似文献
7.
针对邹城市南屯矿铝铸车间某设备基础施工中地层情况特殊的现状,提出采用先进的液氮冻结法,达到了高效快速施工的效果,对液氮冻结设计、冻结施工及掘砌施工情况进行了论述,对相关问题进行了研究。 相似文献
8.
1 INTRODUCTIONIt s well known that the hydrogen absorptionand desorption cycling in the LaNi5 based AB5 type alloys always induces high isotropic or aniso tropic strains and therefore accelerates the rate ofpulverization, which has been considered as themain reason for the degradation of hydrogen stor age alloys in the electrochemical cycling[1]. There fore, it s necessary to study the properties of thehydrogen cycling induced strains and other strain related microstructu… 相似文献
9.
霄云煤矿主井井筒表土层厚420.35m,采用冻结法施工。表土层底部有1层厚达102.75m的膨胀粘土层,凿井施工难度较大。为防止冻结管断裂,确保井筒施工安全,尤其是深厚冻结粘土层段掘砌施工安全,冻结施工单位从多个方面采取措施,收到了较好的效果。 相似文献
10.
1