Microstructure,wear and corrosion characteristics of multiple-reinforced (SiC–B4C–Al2O3) Al matrix composites produced by liquid metal infiltration

In this study, AA7075 aluminum matrix composites reinforced with the combination of SiC, Al₂O₃, and B₄C particles were fabricated by the liquid metal infiltration method. The effects of the relative ratio of B₄C and Al₂O₃ particles on the microstructural, wear, and corrosion features of the composite samples were analyzed using XRD, light metal microscopy, SEM, EDS, Brinell hardness, ball-on-disc type tribometer, and potentiodynamic polarization devices. It was determined that infiltration occurred more successfully, and homogenously distributed particles with reduced porosity were obtained as the amount of Al₂O₃ increased. Worn surface studies revealed that the specimens were predominantly worn by abrasion and adhesion. The increase in B₄C/Al₂O₃ ratio caused a decrease in the hardness and wear strength, whereas it increased the corrosion resistance.     

Effect of Boronizing on Operating Stability of Steel AISI 304L under Erosion Impact of Hard Particles

Metal Science and Heat Treatment - The effect of solid boronizing at 950°C for 2 and 4 h on the phase composition, microstructure, hardness and abrasive wear of steel AISI 304L is studied...     

Flexible poly(styrene-ethylene-butadiene-styrene) hybrid nanofibers for bioengineering and water filtration applications

Among the thermoplastic elastomers that play important roles in the polymer industry due to their superior properties, styrene-based species and polyurethane block copolymers are of great interest. Poly(styrene-ethylene-butadiene-styrene) (SEBS) as a triblock copolymer seems to have the potential to meet many demands in different applications due to various industrial requirements where durability, biocompatibility, breaking elongation, and interfacial adhesion are important. In this study, the SEBS triblock copolymer was functionalized with natural (Satureja hortensis, SH) and synthetic (nanopowder, TiO₂) agents to obtain composite nanofibers by electrospinning and electrospraying methods for use in biomedical and water filtration applications. The results were compared with thermoplastic polyurethane (TPU) composite nanofibers, which are commonly used in these fields. Here, functionalized SEBS nanofibers exhibited antibacterial effect while at the same time improving cell viability. In addition, because of successful water filtration by using the SEBS composite nanofibers, the material may have a good potential to be used comparably to TPU for the application.     

On keys' meanings and modes: the impact of different key solutions on children's efficiency using a mobile phone

The present study investigates the impact of different key solutions of mobile phones on users' effectiveness and efficiency using the devices. In the first experiment, 36 children (9 - 14 years) and in the second experiment 45 young adults (19 - 33 years) completed four common phone tasks twice consecutively on three simulated phones that had identical menus, but different key solutions. An approach was undertaken to quantify the complexity of keys in three models, incorporating different factors contributing to the keys' complexity (number of key options, number of modes and number of modes with a semantically dissimilar meaning), in order to predict users' performance decrements. As a further main factor, the degree of the users' locus of control (LOC) was measured and interactions with performance outcomes were studied. As dependent measures, the number of inefficient keystrokes, the number of tasks solved and the processing time were determined. Results showed a significant effect of control key solutions on users' efficiency and effectiveness for both children and young adults. Moreover, children's LOC values significantly interacted with performance: children with low LOC values showed the lowest performance and no learnability, especially when using keys with a high complexity. From the three factors contributing to the complexity of keys, keys exerting different functions with semantically inconsistent meanings had the worst effect on performance. It is concluded that in mobile user interface design keys with semantically inconsistent meanings should be generally avoided.     

Fabrication of Schottky barrier MOSFETs using self-assembly CoSi2 nanopatterning and spacer gate technologies

A self-assembly patterning method for generation of epitaxial CoSi₂ nanostructures was used to fabricate 50 nm channel-length MOSFETs. The transistors have either a symmetric structure with Schottky source and drain or an asymmetric structure with n⁺-source and Schottky drain. The patterning technique is based on anisotropic diffusion of Co/Si atoms in a strain field during rapid thermal oxidation. The strain field is generated along the edges of a mask consisting of 20 nm SiO₂ and 300 nm Si₃N₄. During rapid thermal oxinitridation (RTON) of the masked silicide structure, a well-defined separation of the silicide layer forms along the edge of the mask. These highly uniform gaps define the channel region of the fabricated device. The separated silicide layers act as metal source and drain. A poly-Si spacer was used as the gate contact. The asymmetric transistor was fabricated by ion implantation into the unprotected CoSi₂ layer and a subsequent out-diffusion process to form the n⁺-source. I–V characteristics of both the symmetric and asymmetric transistor structures have been investigated.     

Management, Market, and Financial Factors Separating Winners and Losers in E-Business

There have been many successful e‐businesses as well as many failed e‐businesses. The methods and practices that were evident in the development of both surviving e‐businesses and failed ones have much to teach us. Why did some e‐businesses fail while others survived? At present few guidelines exist to assist e‐business owners and managers wanting to succeed in their Internet‐based ventures. This study empirically investigated factors that may lead to e‐business success or failure; these were categorized as management, market, and financial factors. The results of a survey were combined with one‐on‐one interviews of venture capitalists who funded successful and failed e‐businesses. The results indicate that certain factors deemed applicable to an e‐business may have contributed to the firm’s eventual success or failure.