Enhanced sludge conditioning by enzyme pre-treatment: comparison of laboratory and pilot scale dewatering results.

The effect of enzyme pre-treatment on dewaterability of anaerobically digested sludge was investigated at both laboratory and pilot scale. Our results revealed a significant increase in cake solid content (27% cake solids compared to 18% without enzyme pre-treatment), using an enzyme dose of only 20 mg/L. In order to assess practical application, enzyme pre-treatment was applied at the Wilmington, Delaware (U.S.) wastewater treatment plant, using a pilot-scale centrifuge. However, the efficiency reached in laboratory scale could not be obtained in pilot scale, where the final cake solids content did not exceed 20%. Centrifuge and belt filter press (simulated by Crown Press) dewatering were compared in terms of the process efficiencies in the absence and presence of enzyme pre-treatment. Possible factors that might cause the differences were tested by experimental and statistical comparisons. Results indicated that the higher shear applied in centrifugation is responsible for the lack of improved cake solids. The network strength of sludge determined by rheological measurements revealed that enzymatic treatment weakens the gel structure of the sludge floc through the hydrolysis of extracellular polymeric substances; this allows improved dewatering by filtration processes, but leads to floc deterioration when subjected to high shear during centrifugation.     

The influence of dietary iron on zinc in rat

Cortical bone remodeling rates for rib samples from three archaeological populations and a modern autopsy sample were determined using an algorithm developed by Frost (Frost [1987a] Calcif. Tissue Res. 3:211-237). When plotted against the relative antiquities for population samples, histomorphometric variables; i.e., activation frequency (mu rc), net bone formation (netVf,r,t), and mean annual bone formation rate (Vf,r,t), exhibit a concordant trend of increased cortical bone remodeling activity levels over time. Two intensive foraging populations, Windover and Gibson, are similar for all bone remodeling parameters and have the lowest remodeling activity levels among the samples. The more recent Ledders sample, which is reported to practice agricultural subsistence, is consistently intermediate between these and a modern autopsy sample. Although there appear to be differences in bone formation rates among the populations it is concluded that these differences cannot be attributed to differences in bone remodeling rates among the populations, but rather are reflecting different effective ages of adult compacta for their ribs. These findings suggest that the earlier populations, particularly Windsor and Gibson, appear to have reached skeletal maturity at an older age than observed for modern.     

Excavation and support design of the Dicle–Kralkizi water tunnel: an overview

Tunneling projects have their uniqueness in terms of engineering problems. The expertise gained from analyzing these projects establishes a sound basis for future application. This paper conveys experiences gained during the construction and support of the design of the Dicle–Kralkizi water tunnel, Turkey. Tunnel stability problems including overbreaks and surface subsidence are evaluated. An analysis of the breakdowns, factors controlling advance rate and the overall performance of tunnel are covered. The accumulated information presented here is believed to be useful and reliable for a successful tunnel excavation in similar formations.     

The importance of structural and gel fractions in determining shear sensitivity of sludge.

Shear sensitivity measurements with variation of ingredients in a synthetic sludge can be related to biosolids' structural properties and particulate amount. The shear sensitivity is primarily controlled by the gel fraction, with alginate and the associated cations increasing the gel-like behavior. However the effect of particulate fraction on shear sensitivity should also be taken into account. Shear sensitivity is thus a complex parameter including two types of response: the resistance to dispersed mass concentration into centrate, and the maintenance of desired strength while the solids concentration increases in the shear field.     

Calcitonin treatment in reflex sympathetic dystrophy: a preliminary study

Reflex sympathetic dystrophy is one of the important complications effecting the rehabilitation programmes of hemiplegic patients in a negative manner by causing pain and function loss. In this study, the aim was to investigate the effects of salmon calcitonin treatment in reflex sympathetic dystrophy that develops in hemiplegia. Forty-one patients with hemiplegia resulting from cerebrovascular events and stage 1-2 reflex sympathetic dystrophy were included in the study. Salmon calcitonin, 1 x 100 IU/day intramuscularly for 4 weeks, was administered to 25 of these patients (calcitonin group) to the other 16 patients physiological saline, 1 ml/day intramuscularly for 4 weeks, was administered (control group). At the end of the fourth week of treatment the pain score of the calcitonin group was significantly lower than that of the control group. Shoulder abduction and external rotation, wrist flexion and metacarpophalangeal extension of the calcitonin group were found to be significantly better than those of the control group. In the calcitonin group the significant decrease in pain and tenderness resulted in improvement of range of motion and motor functions.     

Poly(Acrylamide-Sepiolite) Composite Hydrogels: Preparation, Swelling and Dye Adsorption Properties

Summary Polymer-clay hydrogel composite was prepared on the basis of polyacrylamide (PAAm) gel containing the clay mineral sepiolite. The properties of swelling and dye adsorption of poly(acrylamide-sepiolite) (AAm/Sep) composite hydrogel were investigated. The parameters of swelling and diffusion in water and dye solutions were calculated for the AAm and AAm/Sep hydrogels. It was found that the equilibrium swelling degree of obtained composite higher than that of AAm gel. Spectroscopic analysis of composite and composite-dye systems was done with FT-IR method. Adsorption of monovalent cationic dyes such as Basic Blue 12 (BB-12) Basic Blue 9 (BB-9), and Basic Violet 1 (BV-1), was studied on the composite. In the adsorption experiments, S (Sigmoidal) type for composite gel adsorption isotherms in the Giles classification system was found. Adsorption studies indicated that the amounts of adsorbed dyes on the AAm/Sep composite hydrogel were increased with following order; BB-12 > BB-9 > BV-1. The composite hydrogel may be considered as good candidate for environmental application to retain more water and dyes.     

Nonlinear L2-by-3 transform for PAPR reduction in OFDM systems

Orthogonal frequency division multiplexing (OFDM), the multicarrier modulation technique with high bandwidth efficiency and robustness against multipath fading, is used in several high-speed broadband communication systems including digital video broadcasting (DVB), digital audio broadcasting (DAB), asymmetric digital subscriber line (ADSL), wireless local area network (WLAN IEEE 802.11a,g), high performance radio local area network (HIPERLAN 2), and worldwide interoperability for microwave access (WiMAX IEEE 802.16). However, the transmit signal in OFDM system has a high peak-to-average power ratio (PAPR), one of the major drawbacks of multicarrier transmission, and therefore high dynamic range is required in both the digital to analog converter (DAC) and the power amplifier (PA) for proper operation. Otherwise, the nonlinearities of PA cause out-of-band distortion and increase in bit error rate (BER). Therefore, the reduction in PAPR in OFDM system is desirable in order to obtain power efficiency and increase BER performance. In this paper, a new parametric PAPR reduction technique, L₂-by-3 transform from sliding norm transform (SNT) family is proposed. Based on its parameter, a significant PAPR reduction is obtained. This paper presents the analysis of power saving and computational complexity of the proposed method L₂-by-3 and comparison to two other methods; selected mapping and partial transmit sequence.     

A fuzzy long-term investment planning model for a GenCo in a hybrid electricity market considering climate change impacts

We study the long-term generation capacity investment problem of an independent power generation company (GenCo) that functions in an environment where GenCos perform business with both bilateral contracts (BC) and transactions in the day-ahead market (DAM). A fuzzy mixed integer linear programming model with a fuzzy objective and fuzzy constraints is developed to incorporate the impacts of imprecision/uncertainty in the economic environment on the calculation of the optimal value of the GenCo’s objective function. In formulating the fuzzy objective function we also include the potential impacts of climate change on the energy output of hydroelectric power plants. In addition to formulating and solving the capacity planning/investment problem, we also performed scenario-based (sensitivity) analysis to explore how investment decisions of the GenCos change when fuzziness (tolerance) in the maximum energy output of hydroelectric units and/or drought expectation increases. The proposed model is novel and investigates the effects of factors like drought expectations of climate changes, hydroelectric power plant investments, and other power generation technology investment options.     

Resistorless floating immittance function simulators employing current controlled conveyors and a grounded capacitor

In this paper, new floating immittance function simulators employing second-generation current controlled conveyors are proposed. The first four of the presented circuits employ only a single grounded capacitor as passive component and can realize either a negative or a positive floating inductor or capacitor. The last two of the proposed circuits do not employ passive components and can realize either negative or positive floating resistances. All of the proposed circuits do not require passive element matching. As an application, a third-order butterworth filter is realized using the proposed positive floating inductance simulator. SPICE simulation results and large signal behavior of the filter are included.