Innovative potential of 3D software applications in fashion and textile design

Advanced cloth simulation plug-in tools are increasingly being used by designers in movies, television, advertising and computer games, to take the strain out of creating and simulating realistic cloth effects for dressing virtual characters. This paper describes experiments into designing textiles and clothing using 3D graphics software and a digital cloth dynamics plug-in, which are an integral part of PhD research in progress. The methods used in testing the 3D software and the cloth dynamics plug-in illustrate the experiences of a designer/learner. The results identify designer/learner needs and expectations for the further educational development of the research and use of cloth simulation tools in textiles/fashion design in the near future.     

Experimental investigation of porous bearings under different lubricant and lubricating conditions

The performance of porous bearing under different lubricants and lubricating conditions was experimentally investigated in this study. In order to carry out the experiments, a new test rig was designed to determine the tribological properties of based sintered bronze journal bearings that were manufactured by powder metallurgy (P/M) techniques. To determine the effects of lubricating conditions with and without oil supplement (OS) on the tribological characteristics of these bearings under static loading and periodic loadings, some experiments were carried out using different lubricants. In the tests, pure base oil (SAE 20W50), two fully formulated commercial engine oils (SAE20W50) and lubricating oils with commercial additive concentration ratio of3% were used. The worn surfaces of test bearings were examined using optical microscopy. Experimental results showed that the change in friction coefficient was more stable and in smaller magnitude under static loading than that of periodic loading. In addition, the friction coefficient and the wear rate conducted with base oil resulted in higher values than those of fully formulated oils with and without OS lubricating conditions. The experimental results obtained in this study indicated that the correct selection of lubricant and suitable running conditions were very important on the tribological characteristics of porous bearings.     

Digital sculpting for historical representation: Neville tomb case study

Despite digital 3-D polygon modelling applications providing a common and powerful tool-set for archaeological, architectural and historical visualisation over recent years, the relatively recent developments in high-resolution sculpting software allow for the possibility to create digital outcomes with a degree of surface fidelity not previously obtainable from the more widely used poly-modelling software packages. Such digital sculpting applications are more commonly applied within the video games and TV/motion picture industries, the intention of this paper is to show how such tools and methodologies together with existing scanned data and some historical knowledge can remediate and re-imagine lost sculptural form. The intended research will focus on an examination and partial re-construction of the tomb of Sir John Neville, 3rd Baron Raby located at Durham Cathedral, County Durham UK.     

Process control at the sealing line during sheet metal hydroforming

Sheet metal hydroforming is a deep drawing process that uses a pressure medium for load transmission. The process is mainly influenced by the control of the blank holder force and the fluid pressure. This report describes investigations of a newly developed process-control system. Process variables can be controlled by the sealing state of the tool. The detection is performed by a CCD-camera system that allows the continuous recording of occurring leakages. Different control strategies can be used to control the multiple process parameters. This paper describes the performance and the limits of the aforementioned technology.     

Preparation and characterization of multilayer anti-reflective coatings via sol-gel process

Single layer and multilayer films consisting of SnO₂, Ta₂O₅, SiO₂, TiO₂, indium tin oxide (ITO) and antimony tin oxide (ATO) have been prepared by sol-gel dip coating technique. All of the multilayer films contained a SiO₂ top layer, which was composed of SiO₂ nanoparticles. The other films had polymeric character. Obtained films were characterized by ellipsometry, XRD, AFM and SEM. Light transmittance values of the films were compared. Films other than SiO₂ and Ta₂O₅ were found to have crystalline structure. Thickness values of the films were in the range of 30–115 nm and roughness values were in 1.2–23 nm range. Single layer porous silica provided 95% light transmittance, whereas ITO-TiO₂-SiO₂ multilayer film provided a light transmittance of 97.2%.     

New local binary pattern approaches based on color channels in texture classification

Multimedia Tools and Applications - In this paper, four novel, simple and robust approaches, which are left to right local binary patterns (LBPLL2R), top to down local binary patterns (LBPT2D),...     

Photocatalytic antibacterial performance of Sn(4+)-doped TiO(2) thin films on glass substrate

Pure anatase, nanosized and Sn(4+) ion doped titanium dioxide (TiO(2)) particulates (TiO(2)-Sn(4+)) were synthesized by hydrothermal process. TiO(2)-Sn(4+) was used to coat glass surfaces to investigate the photocatalytic antibacterial effect of Sn(4+) doping to TiO(2) against gram negative Escherichia coli (E. coli) and gram positive Staphylococcus aureus (S. aureus). Relationship between solid ratio of TiO(2)-Sn(4+) in coatings and antibacterial activity was reported. The particulates and the films were characterized using particle size analyzer, zeta potential analyzer, Brunauer-Emmett-Teller (BET), X-ray diffractometer (XRD), SEM, AAS and UV/VIS/NIR techniques. The results showed that TiO(2)-Sn(4+) is fully anatase crystalline form and easily dispersed in water. Increasing the solid ratio of TiO(2)-Sn(4+) from 10 to 50% in the coating solution increased antibacterial effect.     

Effects of particle size and sintering atmosphere on the structure and performance of 316L/SiC composite hollow fiber membranes

Journal of Porous Materials - 316L stainless steel hollow fiber membranes (HFs) are alternatives for polymer and ceramic based membranes. Chemical and waste treatment industries are application...     

Hybrid SNR-Adaptive Multiuser Detectors for SDMA-OFDM Systems

Multiuser detection (MUD) and channel estimation techniques in space-division multiple-access aided orthogonal frequency-division multiplexing systems recently has received intensive interest in receiver design technologies. The maximum likelihood (ML) MUD that provides optimal performance has the cost of a dramatically increased computational complexity. The minimum mean-squared error (MMSE) MUD exhibits poor performance, although it achieves lower computational complexity. With almost the same complexity, an MMSE with successive interference cancellation (SIC) scheme achieves a better bit error rate performance than a linear MMSE multiuser detector. In this paper, hybrid ML-MMSE with SIC adaptive multiuser detection based on the joint channel estimation method is suggested for signal detection. The simulation results show that the proposed method achieves good performance close to the optimal ML performance at low SNR values and a low computational complexity at high SNR values.