Simulation of Strength Distribution in Ground Ceramics by Incorporating Residual Stress Effect

Strength of ground ceramics may be affected by residual stress as well as surface flaws induced by grinding. Strength prediction for ground ceramics is convenient for mechanical design of ceramic components. In this article, a numerical procedure based on fracture mechanics was proposed to estimate strength distribution of ground ceramics by considering grinding-induced residual stress. Bending strength and residual stress of ground ceramics were measured for three grinding-conditions. By comparison of simulated results with experimental ones, it was revealed that strength characteristics in experiments were well simulated by using the proposed procedure.     

Modulation characteristic of waveguide-type optical frequency combgenerator

We report the modulation characteristics of a waveguide-type optical frequency comb generator (WG-OFCG) with the advantages of compactness, high modulation index and low driving power. The characteristics of the optical frequency comb (OFC) generated when the modulation index exceeds 2π are discussed. The power of the modulation sidebands was measured by the optical heterodyne method with an external-cavity laser as a local oscillator. The dependence of the modulation index of the WG-OFCG on the modulation frequency up to 40 GHz was measured. The generation span of the OFC at the modulation frequency detuned from an integer multiple of the free spectral range (FSR) is discussed     

Dynamic stress intensity factors analysis of interface crack using line-spring model

In this study, a new method for calculating the dynamic stress intensity factors of a bimaterial bending specimen with an interface crack is proposed by making use of a line-spring model. A pre-cracked bending specimen is modeled by one-dimensional beam finite elements and a line-spring representing the stiffness or compliance of a cracked part. The proposed method enables the one-dimensional analysis of a two-dimensional crack problem; thus the time variations of the dynamic stress intensity factors of a bimaterial bending specimen with an interface crack can be obtained by making use of a personal computer within a few minutes. The results obtained by the proposed method agree reasonably well with those obtained by the two-dimensional finite element method, although a slight difference in period can be found. The proposed method enables rapid evaluation of dynamic stress intensity factors. So a rapid evaluation system of the dynamic fracture toughness of a bimaterial with an interface crack can be achieved by combining an instrumented impact test apparatus with a computer program based on the proposed method which runs on a personal computer.     

Transmission and attenuation of the dominant mode in uniformly bentcircular hollow waveguides for the infrared: scalar analysis

A numerical evaluation is conducted of electric field distributions, phase constants, and attenuation constants of the lowest eigenmode in the general class of uniformly bent circular hollow waveguides. The analysis is based on a scalar equation, and numerical results are compared with those of existing approximate theories. Normalized forms of attenuation constants are presented for the parallel and perpendicular polarizations to the bending plane by using structural and material parameters. For sharply bent waveguides, useful and simple expressions are derived for the attenuation constants of the TE and TM modes in the corresponding slab geometry with suitable weighting parameters     

Detection of a brain aneurysm and a way to search for a brain aneurysm aimed at the development of a system to simulate an operation

In this article, a system is proposed for a simulated operation which would help a trainee surgeon to perform a medical operation to ensure that a cerebral aneurysm does not burst. The physician will have acquired empirical medical technologies from operations in traditional clinical teaching. However, there is a problem with safety and the burden to the patient. Therefore, recently a new training approach for a simulated medical operation using virtual reality has been explored. With the aim of developing a simulated system for a medical operation for a cerebral aneurysm, we considered the necessary functions such as detecting the brain aneurysm that is the target of the operation, and searching for a suitable blood vessel to make a plan for the operation.     

Cell Development Enhanced Bionic Silk Hydrogel on Remodeling Immune Pathogenesis of Spinal Cord Injury via M2 Polarization of Microglial

Due to the complex spatial-temporal pathophysiology of spinal cord injury (SCI), effective modulation of SCI-specific inflammatory pathogenesis to achieve desirable therapeutic effects on functional recovery still remains challenging. Herein, cell-enhanced photocrosslinked silk fibroin hydrogels with extracellular matrix-mimicking cues of mechanical properties and RGD (Arg-Gly-Asp) signals are gelled in situ to fill the lesion site to modulate injury-induced neuroinflammation and promote neurite regrowth after SCI. The bionic hydrogel system provides biomimetic mechanical cues to promote neuronal differentiation of neural stem/progenitor cells (NPCs) and neurite growth by activating YAP nuclear expression. Importantly, favored by the strong capacity of silk fibroin hydrogels on macrophage/microglia recruitment, NPCs encapsulated hydrogel (NPCs@SFRGD0.1) effectively promotes recruited macrophages/microglia to M2 polarization in the lesion site by releasing S100A4 and thereby remodels the inflammatory microenvironment after SCI. Moreover, NPCs@SFRGD0.1 successfully reduces glial scar formation and accelerates corticospinal tract axon regrowth to improve locomotor recovery. Overall, this work contributes to illustrating the therapeutic mechanism of NPCs development based biomaterial therapies on modulating inflammatory microenvironment and this NPCs enhanced silk fibroin hydrogel provides a promising therapeutic strategy for SCI.     

Compact electrostatic levitator for diffraction measurements with a two axis diffractometer and a laboratory x-ray source

A compact electrostatic levitator was developed for the structural analysis of high-temperature liquids by x-ray diffraction methods. The size of the levitator was 200 mm in diameter and 200 mm in height and can be set up on a two axis diffractometer with a laboratory x-ray source, which is very convenient in performing structural measurements of high-temperature liquids. In particular, since the laboratory x-ray source allows a great amount of user time, preliminary or challenging experiments can be performed with trial and error, which prepares and complements synchrotron x-ray experiments. The present small apparatus also provides the advantage of portability and facility of setting. To demonstrate the capability of this electrostatic levitator, the static structure factors of alumina and silicon samples in their liquid phases were successfully measured.     

In situ laser heating and radial synchrotron x-ray diffraction in a diamond anvil cell

We report a first combination of diamond anvil cell radial x-ray diffraction with in situ laser heating. The laser-heating setup of ALS beamline 12.2.2 was modified to allow one-sided heating of a sample in a diamond anvil cell with an 80 W yttrium lithium fluoride laser while probing the sample with radial x-ray diffraction. The diamond anvil cell is placed with its compressional axis vertical, and perpendicular to the beam. The laser beam is focused onto the sample from the top while the sample is probed with hard x-rays through an x-ray transparent boron-epoxy gasket. The temperature response of preferred orientation of (Fe,Mg)O is probed as a test experiment. Recrystallization was observed above 1500 K, accompanied by a decrease in stress.     

Pressure Rise and Propagation Phenomena Due to Fault Arc in Container with Opened Pipe

This paper describes experimental and analytic studies on pressure rise and propagation phenomena due to high current arcs in a container with opened pipes. The shape of the experimental container was chosen taking into account underground common ducts. First, arcs were ignited in the container with varying diameter D and length L of the opened pipes and at arc currents of 4 kA to 12.5 kA and an arc duration of 0.1 s. Based on measured waveforms, the maximum pressure rise and the pressure oscillation frequency were obtained. It was found that there is a tendency for to increase with decreasing D and increasing L, and that D has a much greater impact on . In addition, the tendencies of with changing D and L can be approximately explained by Helmholtz resonance. Second, a CFD model for the container with opened pipe was developed based on the experimental results, and simulations were performed. The simulation results were found to correspond to the experimental pressure rise.