Assessment of Sustainability in Water Supply-Demand Considering Uncertainties

Water is a vital resource for life on earth; hence its maintenance is very important. Different regions especially in arid and semi-arid areas are facing population growth and subsequent increase in the domestic, industrial and agricultural activities. Planning of water systems in order to be ready for future development conditions needs further studies on the estimation of the sustainable levels of demands based on the sustainable levels of supplies. In this study a threefold approach for estimating sustainability level of supply and demand in Ahachay river basin in northwestern part of Iran as a case study is taken. In the first method, the internal flows and the origins and final uses of the total resources for each subsystem are estimated and planning for sustainability use index is determined by calculating the available water. Second method introduced a simulation model which is utilized to estimate reliability, resiliency, vulnerability and maximum deficit for a river basin to determine a group sustainability index. In the third method, for evaluating the movement toward sustainability, an index is developed. This index includes parameters that are the difference between supply and demand, percentage of the satisfied demand, productivity of water resources and an indicator for evaluating the reduction of aquifer storage. Finally these methods are compared and a hybrid index combining the indices is developed. An uncertainty analysis is also performed to investigate the random nature of variables in estimating water balance and quantifying the water sustainability. This hybrid index can be used for evaluating the planning scenarios and for maintaining and improving the sustainable state of supply-demand for the region.     

Flexible Triboelectric Nanogenerator Based on High Surface Area TiO2 Nanotube Arrays

Triboelectric nanogenerators (TENGs) can harvest mechanical energy through coupling triboelectric effect and electrostatic induction. Typically, TENGs consist of organic materials, however on account of the potentially wide range of applications of TENGs as the self‐powered portable/wearable electronics, biomedical devices, and sensors; semiconductor metal oxide materials can be promising candidates to be incorporating in TENG structure. Here, flexible TENG based on self‐organized TiO₂ nanotube arrays (TNTAs) is fabricated via anodization method. The introduced flexible large area nanotubular electrode is employed as the moving electrode in contact with Kapton film in vertical contact separation mode of TENG. The fabricated TENG can deliver output voltage of 40 V with the current density of 1 μA cm^?2. To evaluate the role of nanostructured interface, its performance has been compared to the thin film flat compact TiO₂ electrode. The results of extracted charge measurements under short circuit condition indicate that larger triboelectric charge density formed in TNTA‐based electrode (about 110 nC per cycle of press and release) is in comparison to 15 nC in flat TiO₂ electrode. Due to the extensive range of applications of TiO₂, the introduced structure can potentially be applicable in various types of self‐powered systems such as photo‐detectors and environmental gas and bio‐sensors.

     

A generalization of the Chebyshev type inequalities for Sugeno integrals

In this paper, we give a generalization of the Chebyshev type inequalities for Sugeno integral with respect to non-additive measures. The main results of this paper generalize most of the inequalities for Sugeno integral obtained by many researchers. Also, some conclusions are drawn and some problems for further investigations are given.     

Spark plasma sintering of Al-doped ZrB2–SiC composite

This research presents the influence of Al addition on microstructure and mechanical behavior of ZrB₂–SiC ultra-high temperature ceramic matrix composite (UHTCMC) fabricated by spark plasma sintering (SPS). A 2.5?wt% Al-doped ZrB₂–20?vol% SiC UHTCMC was produced by SPS method at 1900?°C under a pressure of 40?MPa for 7?min. The microstructural and phase analysis of the composite showed that aluminum-containing compounds were formed in-situ during the SPS as a result of chemical reactions between Al and surface oxide films of the raw materials (i.e. ZrO₂ and SiO₂ on the surfaces of ZrB₂ and SiC particles, respectively). The Al dopant was completely consumed and converted to the intermetallic Al₃Zr and Al₄Si compounds as well as Al₂O₃ and Al₂SiO₅. A relative density of 99.8%, a hardness (HV5) of 21.5?GPa and a fracture toughness (indentation method) of 6.3?MPa?m^1/2 were estimated for the Al-doped ZrB₂–SiC composite. Crack bridging, branching, and deflection were identified as the main toughening mechanisms.     

Sonoelectrochemical synthesis of a nanoscale complex of lead(II) and 2-methyl-8-hydroxyquinoline: spectroscopic, photoluminescence, thermal analysis studies and its application in an OLED

A new lead complex, [Pb(mq)₂], (mq = 2-methyl-8-hydroxyquinoline) was prepared via an electrochemical route from the oxidation of lead metal in the presence of 2-methyl-8-hydroxyquinoline in a fast and facile process. The complex was fully characterized by means of NMR and IR spectra and elemental analysis. The nanostructure of the prepared compound was obtained by sonoelectrochemical process and studied by scanning electron microscopy, atomic force microscopy, X-ray powder diffraction, IR spectroscopy and elemental analysis. Thermal stability of single crystalline and nanosize samples of the prepared compound was studied by thermal gravimetric and differential thermal analysis. The photoluminescence properties of the prepared compounds, as single crystals and as nanorods, have been investigated. The results showed a good correlation between the size and the shape of the complex particles and emission wavelength. The prepared complex was doped in PVK:PBD blend as guest and its application in the fabrication of OLED was studied. The ratio of lead complex was modified and was equal to 8 (w/w %) in PVK:PBD (100:40).     

Robust nonlinear controller based on control Lyapunov function and terminal sliding mode for buck converter

This paper studies the sliding mode control (SMC) and terminal SMC (TSMC) techniques of output voltage regulation in dc–dc buck converters. In this paper, the conventional terminal sliding manifold (TSM), fast terminal sliding manifold, and adaptive terminal sliding manifold are investigated by using hysteresis‐modulated control. In addition, proportional‐integral‐derivative‐shaped TSM, PI‐shaped TSM, and proportional‐integral‐derivative‐integral‐shaped TSM are proposed in order to overcome the problems of conventional TSMs. Furthermore, a new continuous controller based on control Lyapunov function (CLF), with pre‐settable‐fixed switching frequency, is suggested. CLF‐based controller (CLF‐bC) is also adapted to the discontinuous digital input of the buck converter. In the proposed CLF‐bC, the switching frequency is completely independent and pre‐settable. Stabilization, reference tracking, high performance dynamic response, robustness against parameter uncertainties, and rejection of disturbances (e.g., input voltage changes and load variations) are some advantages of the proposed controllers. Impact of the controllers' parameters on the performance of the system is also summarized. Finite‐time stability of TSMs and proposed CLF‐bC, and the robustness of CLF‐bC against parameter variations and disturbances are mathematically proved. Performance of the proposed Adaptive TSMC (ATSMC), proportional‐integral‐derivative‐TSMC, and CLF‐bC has been verified through matlab simulations and compared with the conventional SMC and TSMC strategies. Copyright © 2016 John Wiley & Sons, Ltd.     

Preparation,morphology and conductivity of polyacrylonitrile/multi-wall carbon nanotubes composite nanofibers

Composite nanofibers of polyacrylonitrile/multi-wall carbon nanotubes (PAN/MWCNTs) were prepared via electrospinning. Samples contained 0, 0.5, 1, 2, 3, and 3.5 wt% of MWCNTs. The viscosity and electrical conductivity of electrospinning solutions were measured. Results revealed that, with the addition of multi-wall carbon nanotubes, viscosity was increased and electrical conductivity was improved. Rheological behavior was studied using two different viscometers. Moreover, morphology and diameters of the composite nanofibers were studied by scanning electron microscopy (SEM) and nanofiber diameter distributions were presented. SEM micrographs showed that by adding MWCNTs, the average diameter of nanofibers was increased. Furthermore, the effect of MWCNTs on glass transition temperature, T _g, was investigated using differential scanning calorimetry (DSC) technique. The results showed that T _g was increased with the addition of MWCNTs. In addition, Fourier transform infrared spectroscopy (FTIR) results showed that MWCNTs can affect the orientation ability of polymer chains. The effects of adding salt, increasing voltage and changing the tip-to-collector distance on the morphology and diameters of composite nanofibers were examined. The electrical conductivity results of electrospun mats were measured by a two-probe method. Electrical conductivity was increased by addition of MWCNTs and its behavior followed the percolation theory. Finally, it was observed that mats with smaller diameters have higher electrical conductivity.     

A three-chamber electrochemical cell facilitated biogas upgrading and high-purity oxygen production

Journal of Applied Electrochemistry - Anion exchange membrane (AEM)-equipped electrochemical cells can be used for removing the carbon dioxide (CO2) from biogas, thereby upgrading its energy...