Elevated serum lipoprotein (a) levels associated with ulcerative colitis in a young Japanese patient

Thromboembolism has been shown to play a role in the pathogenesis of inflammatory bowel disease (IBD). A possibility exists that lipoprotein (a) [Lp(a)], a newly-discovered prothrombotic factor, also participates in the development of at least some cases of IBD. Marked elevation of serum Lp(a) levels was observed in a young patient with ulcerative colitis. A biopsy specimen of the rectal mucosa showed findings compatible with ulcerative colitis, as well as small vessel thrombus occurring within the muscularis mucosa in the rectum. Serum Lp(a) levels were markedly elevated on admission (71 mg/dl), with a gradual decrease to 46 mg/dl on discharge. Moreover, serum Lp(a) levels decreased in parallel with clinical improvement. In the quiescent clinical stage, no small vessel thrombus was observed in the mucosa on follow-up colonoscopy. The association between IBD and hyper-Lp(a)-emia would be presumable but it has been, to our knowledge, previously unreported. The case reported here would be the first young patient, suggesting the presence of hyper-Lp(a)-emia and small vessel thrombus formation occurring in association with the development of ulcerative colitis.     

Catalytic activity and solid acidity of vanadium oxide thin layer loaded on TiO2, ZrO2, and SnO2

Vanadium oxide spread highly on TiO₂ (anatase, A) and SnO₂, and rather densely on TiO₂ (rutile, R) and ZrO₂ to make the monolayer in less than 4–5 V nm⁻². Profile of acid site of the monolayer was measured by temperature programmed desorption of ammonia, and its relation with the surface oxidation state was studied. The acid site density was high on the V₂O₅/TiO₂ (A) independent of the degree of oxidation. On the other hand, that of V₂O₅/TiO₂ (R) and V₂O₅/ZrO₂ depended on the oxidation state, and the high value of the concentration was observed on the oxidized one. The strength of acid site generated on the V₂O₅ monolayer on TiO₂ was as high as on the HZSM-5 zeolite. Turnover frequency (TOF) of propane conversion, and product selectivity were measured in propane oxidation. Among tested oxides, the V₂O₅/TiO₂ (A) showed the high TOF and selectivity to form propylene, while those loaded on TiO₂ (R) and ZrO₂ the small TOF and poor selectivity. Therefore, the reaction profile of activity and selectivity could be related with the extent of spreading and solid acidity. An idea of limit of the acid site density ca. 1.5 nm⁻² on the monolayer was elucidated.     

Impact of Multimedia Traffic Characteristics on ATM Network Configuration

This paper proposes a new topological designmethod, named BXCQ, which optimizes logical networkconfiguration while guaranteeing Quality-of-Service(QoS) requirements for each service class in an ATMnetwork. The BXCQ method determines the optimum logicalnetwork topology associated with each service class soas to minimize network cost. In our previously proposedFull-Net architecture these different logical topologies can be suitably mapped at the sametime on the same ATM physical network by using theVirtual Channel Handler (VCH) to create differentlogical interconnection networks. The BXCQ method allows us to clarify the relations between multimediatraffic characteristics and desirable logical networkconfigurations in Full-Net. Evaluation results suggestthat a service class that is bursty, delay tolerant, and cell loss sensitive with small demandshould be supported by a loop-like topology. This studywill be useful for designing flexible and cost-effectivemultimedia networks that can also adapt to not-yet-known services.     

Functional binders for reversible lithium intercalation into graphite in propylene carbonate and ionic liquid media

Poly(acrylic acid) (PAA), poly(methacrylic acid) (PMA), and poly(vinyl alcohol) (PVA), which have oxygen species as functional groups, were utilized as a binder for graphite electrodes, and the electrochemical reversibility of lithium intercalation was examined in PC medium and ionic liquid electrolyte, lithium bis(trifluoromethanesulfonyl)amide dissolved in 1-butyl-1-methylpyrrolidinium bis(trifluoromethanesulfonyl)amide (BMP-TFSA). Columbic efficiency of 75–80% with more than 300 mAh g^?1 was achieved upon first reduction/oxidation cycle in both electrolytes using these binding polymers, which were significantly improved in comparison to a conventional PVdF binder (less than 45% of columbic efficiency for the first cycle). For the graphite-PVdF electrode, co-intercalation and/or decomposition of PC molecules solvating to Li ions were observed by the electrochemical reduction, resulting in the cracking of graphite particles. In contrast, the co-intercalation and decomposition of PC molecules and BMP cations for the first reduction process were completely suppressed for the graphite electrodes prepared with the polymers containing oxygen atoms. It was proposed that the selective permeability of lithium ions was attained by the uniform coating of the graphite particles with PAA, PMA, and PVA polymers, because the electrostatic interaction between the positively charged lithium ions and negatively charged oxygen atom in the polymer should modulate the desolvation process of lithium ions during the lithium intercalation into graphite, showing the similar functions like artificial solid-electrolyte interphase.     

Viscoelastic properties of epoxy resins. II. Antiplasticization in highly crosslinked epoxy system

The effect of the addition of certain low molecular weight compounds to highly crosslinked epoxy resins was investigated. The behavior which is known as antiplasticization, such as increases in modulus and yield strength and the elimination of β-transition, was observed in the highly crosslinked system as well as in the reported cases of thermoplastics—poly(vinyl chloride), bisphenol A polycarbonate, and polysulfone. Chlorinated biphenyl was found to be one of the most effective antiplasticizers examined in the present paper. However, the remarkable reduction in compressive strain at break and impact strength was not recognized for the highly antiplasticized samples. These phenomena have been interpreted on the basis of free volume concept.     

Present status of beryllides for fusion and industrial applications in Japan

Beryllides have remarkable characteristics besides their low density, such as high radiation resistance, high chemical stability, low hydrogen isotope retention and good high temperature mechanical strength especially for fusion applications. In order to have a practical usage for industrial applications, it is important to compile a set of quantitative data on such properties. It is also important to develop fabrication and processing paths to assure the processing of inherently brittle beryllides.The characterization and manufacturing technologies development have been carried out mainly on the Be₁₂Ti interemetallic compounds at the Be-rich side of the Be-Ti binary system. In the present paper, up-dated results on several properties are described for the compound fabricated by hot isostatic pressing (HIP) and ingot metallurgy. Mechanical properties of the compounds having a duplex microstructure with neighboring phases are evaluated by compressive tests from room temperature to 1273 K. Radiation damage of the compound is preliminary studied by charged particle irradiation. Oxidation in air and the interaction with water vapor are evaluated. Thermal desorption of the deuterium is examined by using transmission electron microscopy (TEM) and thermal desorption spectrometry (TDS). Through these evaluations it seems that Be₁₂Ti is superior as neutron multiplier with respect to pure Be metal.     

A 45 nm 2-port 8T-SRAM Using Hierarchical Replica Bitline Technique With Immunity From Simultaneous R/W Access Issues

We propose a new 2-port SRAM with a single read bit line (SRBL) eight transistors (8 T) memory cell for a 45 nm system-on-a-chip (SoC). Access time tends to be slower as a fabrication is scaled down because of threshold voltage (V_t) random variations. A divided read bit line scheme with shared local amplifier (DBSA) realizes fast access time without increasing area penalty. We also show an additional important issue of a simultaneous read and write (R/W) access at the same row by using DBSA with the SRBL-8T cell. A rise of the storage node causes misreading. A read end detecting replica circuit (RER) and a local read bit line dummy capacitance (LDC) are introduced to solve this issue. A 128 bit lines - 512 word lines 64 kb 2-port SRAM macro using these schemes was fabricated by a 45 nm bulk CMOS low-standby-power (LSTP) CMOS process technology [1]. The memory cell size is 0.597 mum². This 2-port SRAM macro achieves 7 times faster access time without misreading.     

锂离子电池负极材料Sn-SnOx/C复合体的制备及充放电性能

用炭热还原方法制备了Sn-SnOx/Carbon 复合材料,二氧化锡(SnO2)和羧甲基纤维素钠(CMCNa)的混合物在450℃炭化作用下同时生成了炭和SnSnO2纳米颗粒.应用XRD、SEM/EDS、BET和电化学方法对获得的复合材料进行了表征和性能研究.SEM观测结果证明Sn-SnO2纳米颗粒很好地分散在生成的炭复...     

Significance of the interface regarding magnetic properties of manganese nanosilicide in silicon

Magnetic properties of manganese (Mn) nanosilicide embedded in thin silicon-on-insulator (SOI) layers are investigated. Mn nanosilicide formed by Mn⁺ ion implantation into a thin SOI layer followed by a thermal annealing at 600-900 °C shows soft ferromagnetism or superparamagnetism at 5 K. A monotonic decrease of the saturation magnetization is observed with increasing temperature for post implantation annealing and consequently with increasing mean particle size of nanosilicide. In addition, the magnetization is found to be enhanced when the Si surrounding the Mn nanosilicide is selectively removed. These results indicate that the magnetic moment indeed arises from the nanosilicide and is sensitive to the interface conditions.     

Structure-activity relationships of non-peptide vasopressin V1a antagonists: 1-(1-multi-substituted benzoyl 4-piperidyl)-3,4-dihydro-2(1H)-quinolinones

During our systematic studies on the arginine vasopressin receptor V1a-antagonistic activity of 1-(1-benzoyl substituted 4-piperidyl)-3,4-dihydro-2(1H)-quinolinones, we found a general substituent effect on the benzene ring. Hydrogen-bonding ability at the ortho position was especially important for enhancement of the affinity of multi-substituted analogs. Details of the syntheses and structure-activity relationships for this series are presented.