Screening of supports for the immobilization of pectinmethylesterase from acerola (Malpighia glabra L)

A partially purified extract of pectinmethylesterase (PME) from acerola fruit was immobilized on various supports: glass, celite, chrysotile, agarose, concanavalin A Sepharose 4B, egg shell, polyacrylamide and gelatin. In addition, reticulation with glutaraldehyde was assessed, as well as the use of gelatin in the presence of celite, glass and silica. The highest immobilization yields were obtained when the pectinmethylesterase was immobilized in concanavalin A Sepharose 4B (81.7%) and in gelatin‐water (78.0%). Copyright © 2004 Society of Chemical Industry     

A reliable and manufacturable method to induce a stress of >1 GPa on a P-channel MOSFET in high volume manufacturing

This letter discusses a reliable and manufacturable integration technique to induce greater than 1 GPa of stress into a p-channel MOSFET, which will be required to increase the drive current beyond 1 mA//spl mu/m at the sub-90-nm process generation. Uniaxial compressive stress is introduced into the p-channel by both a selective deposition of SiGe in the source/drain and an engineered 2.5-GPa compressively stressed nitride. The highest to date compressively stressed SiN film is obtained by heavy ion bombardment during the deposition of the film.     

Modeling culture in intelligent virtual agents

This work addresses the challenge of creating virtual agents that are able to portray culturally appropriate behavior when interacting with other agents or humans. Because culture influences how people perceive their social reality it is important to have agent models that explicitly consider social elements, such as existing relational factors. We addressed this necessity by integrating culture into a novel model for simulating human social behavior. With this model, we operationalized a particular dimension of culture—individualism versus collectivism—within the context of an interactive narrative scenario that is part of an agent-based tool for intercultural training. Using this scenario we conducted a cross-cultural study in which participants from a collectivistic country (Portugal) were compared with participants from an individualistic country (the Netherlands) in the way they perceived and interacted with agents whose behavior was either individualistic or collectivistic, according to the configuration of the proposed model. In the obtained results, Portuguese subjects rated the collectivistic agents more positively than the Dutch but both countries had a similarly positive opinion about the individualistic agents. This experiment sheds new light on how people from different countries differ when assessing the social appropriateness of virtual agents, while also raising new research questions on this matter.     

Curcumin antifungal and antioxidant activities are increased in the presence of ascorbic acid

The objective of this study was to evaluate the antifungal and antioxidant activities of curcumin, ascorbic acid and the mixture of these two compounds. For the antifungal assay, the minimum inhibitory concentrations (MIC) were determined using Candida strains (ATCC and clinical isolates). Curcumin alone inhibited growth of Candida albicans yeast cells, whereas ascorbic acid did not present effects. However, when the mixture of ascorbic acid and curcumin was assayed to determine the association of the two compounds, the curcumin MIC decreased 5- to 10-fold. In the antioxidant assays, the sum of the alone activities of curcumin and ascorbic acid were lower than the activity of the two-compound mixture. This study highlights the importance of the association between two common antioxidants in foods, to improve the antifungal and antioxidant activities of curcumin (in vitro), and can be applied to Candida spp. infection and diseases associated with oxidative stress.     

Development of composite membrane PBAT: Zeolite Y for application as rhynchophorol release system

Composite membranes consisting of biodegradable poly(butylene adipate‐co‐terephthalate (PBAT) and zeolite Y (0–10 wt %) were produced by extrusion. Zeolite Y is well dispersed in the membrane up to 5 wt %, but tends to agglomerate at higher contents. The presence of zeolite Y in the composite resulted in an improvement of the thermal stability, mechanical properties, and increased the barrier properties. The interaction of the composite membranes with rhynchophorol was investigated by different techniques, showing that the semiochemical progressively lixiviates PBAT monomers, causing thermal and mechanical properties to decrease. However, no interaction seemed to occur between the rhynchophorol and the zeolite. Studies of diffusion of pheromone through membranes have shown that the addition of the zeolite Y has not contributed significantly to a decrease in the release rate of rhynchophorol, but the presence of the zeolite Y helps to increase chemical, mechanical, and thermal stabilities of the membranes. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 45757.     

Flexible Piezoelectric Touch Sensor by Alignment of Lead‐Free Alkaline Niobate Microcubes in PDMS

A highly sensitive, lead‐free, and flexible piezoelectric touch sensor is reported based on composite films of alkaline niobate K_0.485Na_0.485Li_0.03NbO₃ (KNLN) powders aligned in a polydimethylsiloxane (PDMS) matrix. KNLN powder is fabricated by solid‐state sintering and consists of microcubes. The particles are dispersed in uncured PDMS and oriented by application of an oscillating dielectrophoretic alignment field. The dielectric constant of the composite film is almost independent of the microstructure, while upon alignment the piezoelectric charge coefficient increases more than tenfold up to 17 pC N^?1. A quantitative analysis shows that the origin is a reduction of the interparticle distance to under 1.0 µm in the aligned bicontinuous KNLN chains. The temperature stable piezoelectric voltage coefficient exhibits a maximum value of 220 mV m N^?1, at a volume fraction of only 10%. This state‐of‐the‐art value outperforms bulk piezoelectric ceramics and composites with randomly dispersed particles, and is comparable to the values reported for the piezoelectric polymers polyvinylidenefluoride and its random copolymer with trifluoroethylene. Optimized composite films are incorporated in flexible piezoelectric touch sensors. The high sensitivity is analyzed and discussed. As the fabrication technology is straightforward and easy to implement, applications are foreseen in flexible electronics such as wireless sensor networks and biodiagnostics.     

Multi-walled carbon nanotube modified carbon paste electrode as an electrochemical sensor for the determination of epinephrine in the presence of ascorbic acid and uric acid

A biocompatible electrochemical sensor for selective detection of epinephrine (EP) in the presence of 1000-fold excess of ascorbic acid (AA) and uric acid (UA) was fabricated by modifying the carbon paste electrode (CPE) with multi-walled carbon nanotubes (MWCNTs) using a casting method. The electro-catalytic activity of the modified electrode for the oxidation of EP was investigated. The current sensitivity of EP was enhanced to about five times upon modification. A very minimum amount of modifier was used for modification. The voltammetric response of EP was well resolved from the responses of AA and UA. The electrochemical impedance spectroscopic (EIS) studies reveal the least charge transfer resistance for the modified electrode. The AA peak that is completely resolved from that of EP at higher concentrations of AA and the inability of the sensor to give an electrochemical response for AA below a concentration of 3.0 × 10^? 4 M makes it a unique electrochemical sensor for the detection of EP which is 100% free from the interference of AA. Two linear dynamic ranges of 1.0 × 10^? 4–1.0 × 10^? 5 and 1.0 × 10^? 5–5.0 × 10^? 7 M with a detection limit of 2.9 × 10^? 8 M were observed for EP at modified electrode. The practical utility of this modified electrode was demonstrated by detecting EP in spiked human blood serum and EP injection. The modified electrode is highly reproducible and stable with anti fouling effects.     

Resistant starch and thermal,morphological and textural properties of heat‐moisture treated rice starches with high‐, medium‐ and low‐amylose content

This study investigated the effects of heat‐moisture treatment (HMT) on the resistant starch content and thermal, morphological, and textural properties of rice starches with high‐, medium‐ and low‐amylose content. The starches were adjusted to 15, 20 and 25% moisture levels and heated at 110°C for 1 h. The HMT increased the resistant starch content in all of the rice starches. HMT increased the onset temperature and the gelatinisation temperature range (T_finish–T_onset) and decreased the enthalpy of gelatinisation of rice starches with different amylose contents. This reduction increased with the increase in the moisture content of HMT. The morphology of rice starch granules was altered with the HMT; the granules presented more agglomerated surface. The HMT affected the textural parameters of rice starches; the high‐ and low‐amylose rice starches subjected to 15 and 20% HMT possessed higher gel hardness.