Formation of acrylamide in microwave-roasted sorghum and associated dietary risk

The effect of microwave roasting parameters (300, 450 and 600 W; 5, 10 and 15 min) on acrylamide content in sorghum grain was determined using High Pressure Liquid Chromatography (HPLC)-photo diode array (PDA) detector coupled with C-18 column. Samples roasted at 300 and 450 W did not possess acrylamide, whereas 600 W (15 min) favoured formation of 2740.19 µg/kg of acrylamide, levels far exceeding the defined European Union (EU) limits. The chronic daily intake (CDI) for acrylamide through consumption of such grain flour was 3.25–9.5-fold higher to Joint FAO/WHO Expert Committee on Food Additives (JECFA) defined high exposure limits. The margin of exposure (MOE) values ranged from 4.3 to 12.76 and from 11.07 to 32.27 for neoplastic and neurological effects, respectively, demonstrating high exposure and serious health concerns associated with dietary intake of this toxicant. This study assesses the risk for the Indian population and highlights the importance of optimising process parameters for food product to minimise such exposure risks.     

A Discrete Water Cycle Algorithm for Cellular Network Cost Management

Wireless Personal Communications - Water Cycle Algorithm (WCA) is a nature-inspired metaheuristic algorithm. There is a lack of literature surrounding the use of WCA in modern cellular mobile...     

An Information Services Architecture Model Based on Data Processing Stages

The author's simple model for an information services architecture is intended as a common frame of reference for both business and technical practitioners and groups various aspects of computing into four distinct layers based on data processing stages. These layers cover data life-cycle states from the time data is generated, stored, and analyzed, to when it's delivered and used. The model incorporates a link with typical enterprise architecture layers.     

A comparative dielectric relaxation study of PMN–PT and PMN–PZ ceramics using impedance spectroscopy

AC-impedance spectroscopic studies in the temperature range of 30–400 °C are carried out on solid solutions of lead magnesium niobate (PMN) with lead titanate (PT) and lead zirconate (PZ), both of them in the 65/35 atomic ratio. For PMN–PT this corresponds to the morphotropic phase boundary composition (with normal ferroelectric behaviour), and for PMN–PZ it is near the phase boundary between normal ferroelectric and relaxor ferroelectric compositions. The variation of dielectric permittivity with temperature at different frequencies shows normal ferroelectric and relaxor-like dependence for PMN–PT and PMN–PZ, respectively. Temperature-dependent spectroscopic modulus plots reveal a much broader peak for PMN–PZ compared to that for PMN–PT, which is consistent with the dielectric behaviour. PMN–PT shows nearly ideal Debye behaviour below T_m (the temperature of the permittivity maximum) and the behaviour departs from ideality above T_m, whereas non-ideal Debye behaviour is seen both below and above T_m for PMN–PZ. Complex modulus plots fit well with two depressed semicircles and three depressed semicircles, respectively, for PMN–PT and PMN–PZ. The relaxation observed in the spectroscopic plots around 1 MHz for PMN–PT has been assigned to polarisation relaxation expected for normal-sized domains. No such relaxation could be observed for PMN–PZ around 1 MHz because of the mesoscopic domain sizes.     

Effect of hydrophilic and hydrophobic polymers on permeation of S-amlodipine besylate through intercalated polymeric transdermal matrix: 3(2) designing,optimization and characterization

Objective: Innovation in material science has made it possible to fabricate a pharmaceutical material of modifiable characteristics and utility, in delivering therapeutics at a sustained/controlled rate. The objective of this study is to design and optimize the controlled release transdermal films of S-Amlodipine besylate by intercalating hydrophilic and hydrophobic polymers.

Methods: 3(2) factorial design and response surface methodology was utilized to prepare formulations by intercalating the varied concentration of polymers(A) and penetration enhancer(B) in solvent. The effect of these independent factors on drug release and flux was investigated to substantiate the ex-vivo, stability and histological findings of the study.

Results: FTIR, DSC revealed the compatibility of drug with polymers; however, the semicrystallinity in drug was observed under PXRD. SEM micrographs showed homogeneous dispersion and entanglement of drug throughout the matrix. Results from the permeation study suggested the significant effect of factors on the ex vivo permeation of drug. It was observed that drug release was found to be increased with an increase in hydrophilic polymer concentration and PE. The formulations having polymers (EC:PVPK-30) at 7:3 showed maximum drug release with highest flux (102.60?±?1.12?µg/cm²/h) and permeability coefficient (32.78?±?1.38?cm/h). Significant effect of PE on lipid and protein framework of the skin was also observed which is responsible for increased permeation. The optimized formulation was found to be stable and showed no-sign of localized reactions, indicating safety and compatibility with the skin.

Conclusion: Thus, results indicated that the prepared intercalated transdermal matrix can be a promising nonoral carrier to deliver effective amounts of drug.     

Optimized and load balanced clustering for wireless sensor networks to increase the lifetime of WSN using MADM approaches

Wireless Networks - The power utilization has verified as a major problem in wireless sensor networks (WSNs). Many researchers have provided efficient solutions for power utilization. Clustering is...     

Silver monoliths and their applications in catalytic reduction of 4-NP to 4-AP and sensing against As3+

Journal of Porous Materials - Silver monoliths using non-ionic surfactant Triton X-102 as reducing agent with and without additives such as Dextran and Ludox (SiNPs) were synthesized by modified...     

Correlation between the milling time and hydrogen storage properties of ZrCrFe ternary alloy

Laves phases with AB₂ compositions are common type of topologically close packed structure. Furthermore, lave phases are capable of dissolving considerable amounts of ternary alloying additions. ZrCr₂ crystallized in the hexagonal C14 type of structure is one of interesting candidate among them, but it is not used as storage compound due to its excessive stability, at 323 K the equilibrium pressure is only 1.2 kPa. However the substitution of chromium by other elements can modify the crystal structure, the hydriding capacity and dissociation pressure of hydrogen. In this work Fe has been chosen as a substitute material for Cr and ZrCrFe ternary alloy is prepared using arc furnace. The mechanical alloying process has been introduced to produce nanocrystalline material. This paper presents comprehensive study on structural aspects of ball milled ZrCrFe alloy. On comparison of the XRD data, the broadening was found in the peak width with the increase of milling time which is clear indication of refinement of crystallite size. This refinement could also be confirmed from the SEM analysis also. PCT measurements were performed for a temperature range 303 K–373 K.